Top Plastics Mould Parts

acrylichk.com | DFG-0604 Mould Assembly Price Number Tag - 6mm Height, BLACK Embossed Digit in CRYSTAL ground, TOTAL: 360 CUBES/with 15-Removable-Compartment Clear Parts Storage Box

  • Mould Assembly Price Tag with suitable visual angle is a reusable pricing system perfectly for retail shop window counter display..
  • Side-joints mould assembly the digits together without glue. Different digit sizes and colors are provided to match your products and needs..
  • Each package comes with a plastic box provides minimum 5 to maximum 15 removable compartments to manage all digits and parts in tidy..
  • compartments sizes range from 33x30x20h mm to 168x30x20h mm..
Check Stock

GEOBY Mildew Cleaner Foam Spray, Mould Cleaner Spray, Mildew Deodorant Decontamination Spray (2PCS)

  • REMOVE UNWANTED ODORS --- keep your home free of musty, damp smells that are usually left behind by other sprays.
  • our mildew cleaner foam spray is great to use in the kitchen, toilet area, drywall curtains..
  • INGREDIENT SAFETY --- mould cleaner spray use the mild and effective concentrated formula can easily emulsify grease and dirt with dense foam on contact, without hurting hands or items, safe and fast..
  • CLEAN ANY SURFACE --- this mildew deodorant decontamination spray removes tough stains from tile, showers, bathroom surfaces, tents, hardwood floors, hard plastics, automobile tires, wood, grout and fiberglass..
  • QUICK CLEANING --- our instant spray cleaner removes the stains left behind from black mold. they tend to leave behind ugly staining that can go deep below the surface..
  • NO SCRUBBING NEEDED --- simply spray our foam cleaner on the affected area and watch the stains disappear right before your eyes!.
Check Stock

38mm 1 1/2 Green Air Filter With Two 5mm Gas 5/16 Inline Fuel Filter Lifan 125cc Apollo 125 110cc Dirt Pit Bike Gy6 49cc 50cc Taotao Atm50 Moped Scooter 110cc 150cc 200cc Motorcycle Atv Quad

  • ✪38mm air filter is to filter the air supplied to the engine before entering the combustion chamber to remove dust, sand and other impurities in the....
  • ✪ssr 125 pit bike parts is a gap between the shape of the filter paper and the installation shell, which causes part of the air to enter the....
  • ✪Fit:ssr 110 carburetor,pw80 air filter,pw80 plastics kit,yamaha pw80 parts,yamaha ttr 125 plastics,yamaha ttr 90,pw 50 plastic,crf 50 plastics,klx....
  • ✪Item Type: Air Filters & Systems,Item Height: 9 cm,Item Width: 7.5cm,Item Length: 8 cm,Inlet Diameter: Approx. 38mm/1.5'',Filter Size(H x Dia.):....
  • ✪If the ssr 110 parts air filter is not cleaned/replaced for a long time, it will cause serious blockage of the filter holes, poor intake of the....
Check Stock

JENOLITE Underwater Epoxy Putty Repair Stick | Aqua Repair Can Be Applied Underwater | Pipe Repair, Hot Tub, Spa, Pool, Marine, Aqua, Boat | 7 inch (4oz)

  • Underwater Epoxy Stick: Waterproof epoxy repair, fixes holes, cracks, leaks, fast.
  • Easy To Apply Underwater & Damp Areas: putty-like consistency, easy to mould to shape (both fresh and salt water).
  • Multi Surface Use: bonds with fibreglass, concrete, glass metal, wood and many plastics.
  • Ideal For Emergency Repairs: to damp, wet and underwater surfaces, such as holes, cracks, leaks and gouges in boat decks and hulls, pools hot tubs and spas, recreational equipment, as well as leaking tank and gutters..
  • Once cured it is fully waterproof and can be sanded and painted over.
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock

Wrdlosy Plastic Welder, 800PCS Staples, Plastic Welding Kit, Must Have For DIYers, Instant On/Off, Plastic Welder Kit, Bumper Repair Kit Plastic Repair Kit, Portable Toolbox, Hot Stapler

  • ✔ 【Multipurpose Fit】 - Our Plastic Welder suitable for repairing and reinforcing plastics parts of all automobiles, such as bumpers, dashboards, lamp holders, plastics rings, and daily plastics supplies. Save you much money!.
  • ✔ 【An Ideal DIY Tool】 - Stainless steel staple will not rust, Wavy staple design for maximum load. The ideal way for repairing most modern products which are made of plastics. Hot Stapler, Strong for shock and twi-st after repairing soldering..
  • ✔ 【Quick Operation】 - Plastic Welding Kit choose right staple, insert into the brass holder, press power button, wait a few seconds, and let staple melt into plastic parts slowly, in case staple cross through the plastic board..
  • ✔ 【More Comfortable】 - Plastic Weld Ergonomic designed to fit into the palms of your hand. Design with light,make you see the cracked part of the bumper clearly. our worry-free 5-Year warranty, and friendly customer service. if you have any problems during usage, please contact us, our service team will be available any time..
  • ✔ 【Portable Welder】 - Plastic repair We....
Check Stock

Whaline Christams Gingerbread House Baking Tray Silicone Molds for Desserts Chocolate Candy,Cookies 2 Pieces

  • PACKAGE INCLUDE - 2 pieces Christmas theme silicone molds, totally 16 mould pits. Enough quantity and patterns for festive use and daily use. Delicate....
  • 3D HOUSE DESIGN - 2 roof mould pieces and 4 wall mould pieces can used for house building and tree, gingerbread, bird animal mould can stand beside....
  • SAFE MATERIAL - Made of good-quality silicone, our molds are available in ovens, freezers, microwaves and dishwashers. Flexible, non-stick and easy....
  • SIZE - Silicone mould is measuring 28.3x 18.1 x 0.8cm .1inx 7.1in x 0.31in. Each mould pit is suitable for making a chocolate house. You can put the....
  • GREAT FESTIVE DECOR- Perfect for Christmas party, holiday family gathering and new year party. You make chocolate house decor for cake, bakery,....
Check Stock

3 Shapes Storage Box Resin Moulds with Lids Crown Resin Jar Mould Jewelry Jar Silicone Mould Jewelry Ring Box Epoxy Mould Storage Bottle Casting Moulds for DIY Container Soap Candle Trinket Making

  • Nice combination: the package comes with 3 shapes storage box resin moulds with lids, including 1 crown resin jar mould, 1 vintage stripe edge box resin mould, 1 mini jewelry box mould, different styles for you to choose, allow you have a interesting making time.
  • DIY as you want: you can DIY your own jar with different options like glitter powder, mica powder, liquid resin dye or dried flowers and so on, to make a nice home decor or a gift for your family and friend by your imagination.
  • Reliable quality: made of silicone material, smooth and washable, you can clean and store the jewelry jar silicone mould easily, saving you much time and energy.
  • Easy to release: our jewelry ring box epoxy mould is easy to operate, you just need to twist the mould and release your creation out of your mould after the resin is completely cured.
  • Your piece comes out easily, no sticking, no tearing while the mould maintains its shape.
  • Functional usages: ideal for making craft projects and jewellery DIY storage box, gift box, candy box, candlesticks, items containers, flower pot or other items, the finished crafts will also be beautiful decorations for your home, office, shop and other places.
Check Stock

4 Pieces Mushroom Shaped Silicone Mould Mushroom Cake Moulds Vegetable Fondant Candy Moulds for Chocolate Candy Ice Cube French Dessert Cake Decoration

  • Package includes: you will get 4 pieces funny shape silicone moulds in 3 different shapes.
  • The size of each mould is different, please refer to the picture for the specific size carefully before purchasing.
  • Reliable material: made of quality silicone material, these mushroom chocolate mould trays are durable, non-toxic, odorless, heat resistant and reusable, so you can rest assured to use them to make various kinds of food.
  • Mould trays are able to be applied in oven, microwave, dishwasher and fridge.
  • Smooth and non-stick: the surface of silicone mould is smooth, non-stick and flexible.
  • And the mushroom-shaped dessert will pop up by pressing the mould with your fingers, easy to demould and also convenient to clean with water.
  • Wide range of usages: these silicone moulds are suitable for baking mousse, cake, French dessert, chocolate, ice cube, candy, cheese cakes, fondant, chocolate, candy, cake decoration, soap, candle, wax and more.
  • Cute shape design: silicone chocolate mould is well designed as many mushroom shapes, cute and lifelike.
  • With this vivid 3D mould, your baking will be more fun and memorable, and desserts made with it will be loved by your friend and family.
Check Stock

Silicone Mold Gnome Mold 3D Gnome Mold Epoxy Dwarf Plaster Mold for Soap DIY Paint Your Own Gnome Resin Making Wax Ceramic Polymer Clay 1

  • Package contents: you will receive 1 piece of pink gnome mould in pink color.
  • The size of the mould is about 10 cm/ 3.94 inches in height, 4.5 cm/....
  • Serviceable material: our gnome silicone mould is made of quality silicone, which is reliable, not easy to deform, tear and break, and can keep for a....
  • Easy to apply: you only need to put the resins or other materials into the Christmas silicone mould and wait for them to solidify.
  • Match with your DIY crafts: you can use the silicone mould to make a variety of dwarfs and print different patterns or letters on them, making....
  • Wide applications: this dwarf silicone mould can be compatible with different resins, concrete, perfumed soaps and other materials.
Check Stock