Top Plated Drill Bit

Rustark 23 Pcs Wood Drill Bit Set with Dowel Pins Center Point and Stopper, Woodworking Brad Point Bit Set Plugs Drill Hole Tool Perfect for Woodworking Carpentry Drilling

  • ...ing. Spiral and wide flutes for removing the chip quickly. With universal round handle(3-10mm), Both electric drill and bench drill can be used, avoiding to walk..
  • ⚙️【High-value Plugs Drill Hole Tool】The dowel pin center point is made of stainless steel with chrome plated for wear-resistance and corrosion-resistance. Work great on accurate alignment of drill holes when doing dowel pin joinery. Accurately mark location of dowel holes or existing pins location in second board being joined.
  • Positioning two wood connection holes to make two wood blocks join perfectly..
  • ⚙️【Essential Drill Bit Stop Collar Set】Made of carbon steel with hardness, wear resistance and corrosion-resistance. Single hole design can lock the drill bit stably, avoiding to deviate when drilling. Coming with FREE hex key for removal and installation quickly..
  • ⚙️【Widely Application】Work great on woodworking. Suitable for all kinds of wood, such as pine, walnut, ashtree, elm, camphorwood, sandalwood, density board, birch,compacting board and plastic and so on. Compatible drill: Hand drill/rechargeable drill/bench drill. NOTE: pls don....
Check Stock

ZRM&E 8pcs 14mm Laboratory Keck Clamp Plastic Lab Keck Clips for Glass Standard Conical Interface Clip Ground Glass Joint, Green

  • 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
  • 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
  • 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
  • 【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
  • 【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock

MegaPro 9BP-HX-3A Replacement Bit Packs, HD2.00-3.00, HD4.00-5.00, HD5.50-6.00

  • Store easily in the patented pullout bit cartridge.
  • Can be used with any drill that has a 1/4-Inch quick change chuck.
Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 3/4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：3/4Inch, Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..
Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：4 Inch (100mm), Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..
Check Stock

ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 4-1/2 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic

  • 【Top Quality】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Cutting diameter：4-1/2 Inch (115mm), Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal.
  • 【Unique Three-blade Design】 This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals.
  • 【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • 【High precision and Easy to Use】TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
  • 【Package】Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit，each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust)..
Check Stock

Woodworking Chamfer Drilling Tool Step Countersink Drill Bit Set for for Glass Metal 9PCS Drill

  • The Chamfer Drilling Tool is made of high-speed steel, titanium-plated, practical and durable.
  • There are 3 step drill bits and 6 Countersink drill bits in the package.
  • Countersunk bit set is suitable for quick change, suitable for most power tools with 0.64 cm hex shank.
  • Countersink Drill Bit Set is suitable for chamfering various materials, such as wood, plywood, aluminum, iron, copper, fiberboard, particleboard, plastic, PVC board, etc..
  • Automatic manual Chamfer Drilling tool with spring load mechanism, suitable for wood, metal and other materials.
Check Stock

Diamond Hole Saw 15 pcs Diamond Drill Bits Set Glass Drill Bit Extractor Remover Tools for Glass Ceramics Porcelain Ceramic Tile 1/4 -2

  • 【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A....
  • 【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases....
  • 【LARGE CLEARANCE HOLE】These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other....
  • 【WIDE USAGE】 15 different drill bits included with this glass drill bit set to meet various demands. Perfect for drilling glass, tile,....
  • 【 LIVE SUPPORT 】 For any questions, call or email the contact information that comes with the package. We stand behind our high quality....
Check Stock

JOHOUSE Diamond Drill Bit Set, 10PCS Hole Saw Set for Granite Stone, Glass, Porcelain, Marble

  • 【10 Sizes】- Drill bit set comes with 10 different sizes - 6/ 8/10/12/14/16/18/20/22/30 mm, can meet your different needs.
  • 【High-Quality & Durable】 - Our diamond drill bits are all made of high-strength carbon steel, coated with a nickel-plated layer, rust-resistant and corrosion-resistant, designed for the long-term using.
  • 【Flawless Performance】 - Diamonds on the tip of the bit, ensuring smooth punching and making the drilling process easier, precise cutting without rough edges.
  • 【Perfect Design】 - The side slots on the bit's body can help the entry of cooling water and the ejecting of debris from the borehole. When debris gets stuck in the hole saw. You can use the mini screwdriver to pull it out.
  • 【Widely Applicable】 - Our drill bits are perfectly compatible with ceramic, glass, tile, porcelain, marble, slate, granite stone, etc.
Check Stock

Diamond Drill Bit 10 pcs Glass Diamond Hole Saw Set Drill Bits Extractor Remover Tools for Ceramics Porcelain Ceramic Tile 6mm - 30mm

  • 【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A....
  • 【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases....
  • 【LARGE CLEARANCE HOLE】These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other....
  • 【WIDE USAGE】 10 different drill bits included with this glass drill bit set to meet various demands. Perfect for drilling glass, tile,....
  • 【 LIVE SUPPORT 】 For any questions, call or email the contact information that comes with the package. We stand behind our high quality....
Check Stock

Kyoffiie Diamond Drill Bits, 16Pcs Diamond Hole Saw Set with 10Pcs Tile Hole Saw Set & Adjustable Hole Saw Guide Jig Fixture 6mm-50mm for Glass, Porcelain, Ceramic, Marble, Tile, Granite

  • 【Premium Material】- These hollow drill hole saw set are made of high speed steel and have a nickel-plated coating to resist corrosion. The thickened diamond coating on the top provides excellent cutting strength for high-precision, smooth cuts without hemming for maximum drilling results..
  • 【Multiple Sizes】- 10 Sizes tile drill bits to meet various needs. Including 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, diameter of triangle bit: 6mm, 8mm, 10mm, 12mm. Set include 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver + 4 triangle bit..
  • 【Ergonomic Design】- The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling process easier. When debris gets stuck in the small hole saw. We can use our screwdriver to pull it out. Ceramic drill bit to provide you with the perfect experience..
  • 【Adjustable Fixture】- Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4.
Check Stock

Penn State Industries PKMSCUP Measuring Cup 4pc Set Woodturning Project Kit (1pack)

  • This is a woodturning project kit. A LATHE IS NEEDED TO 'TURN' INTO A FINISHED MEASURING CUP SET. Blanks, bushings, drill bit, and all other turning accessories are not included..
  • Includes (1) PKMSCUP Measuring Cup 4pc Set Woodturning Project Kit.
  • Each set includes the following measuring cup sizes: 1/4 cup, 1/3 cup, 1/2 cup, 1 cup.
  • Uses bushing set PKABBU. Requires a 7mm drill bit (PK-7MM) and 3/4" x 3/4" x 3-3/8" minimum blank size..
  • Easy to make on a pen mandrel. 'Turn' a must-have kitchen essential. Each set includes four of the most common measuring cup sizes used for cooking and baking.
  • 1/4 cup, 1/3 cup, 1/2 cup, and 1 cup. These cups are plated with durable, food safe stainless-steel inside, and chrome plated on the outside. Easy to hand-wash. The measurements are etched on the side for easy identification..
Check Stock