Top Plating Nozzles

HYDRO MASTER 0179101 Universal Outdoor Misting System Calcium Inhibitor Filter (2 pcs)

  • [ Solid Brass Misting Nozzles and Plug ] The misting nozzles and the plug are mechanically carved from the brass rod. Each nozzle or plug contains a black gasket, good sealing..
  • [ 0.0197" Orifice (0.5 mm) Excellent Misting Effect ] The orifice of the misting nozzles and plugs is 0.5mm（0.0197"), so it will produce tiny and soft mist to make excellent cooling misting in hot summer. Diameter: 0.9cm(0.35"), Height: 1cm(0.39").
  • [ 10/24 UNC Standard Thread ] The thread of the nozzles and plugs is 10/24 UNC, and matches many kinds of tee connectors widely. Such as the 1/4" tee connector, 1/2" turn 1/4" tee connectors, standing misting nozzle connector and so on..
  • [ Product Included and Water Setting ] Product included: 10pcs mist nozzles and 2pcs mist plugs. Water Setting: 2-2.3GPH(us gal per hour), 0.2-0.6MPA. It's suggested to install less than 30pcs nozzles on one water line to make an excellent misting effect in common faucet/tap water pressure in the U.S..
  • [ Wide Range of Use in Hot Summer ] The nozzles are used in misting system to make cooling misting, the plugs are used to stop somewhere you don't want to mist some time. It's widely used to make outdoor cooling system, agriculture irrigation system, standing misting system, trampoline misting, de....
Check Stock

Genuine E3D v6 Plated Copper Heater Block (V6-BLOCK-CARTRIDGE-COPPER)

  • Cleaning needle: 10 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears..
  • V5 V6 Nozzles: Material: brass, Thread type: M6, Output diameter: 0.4 mm.
  • Input filament diameter: 1.75 mm, Compatible: V5 and V6 extruder hotend Filament, supported: ABS / PLA / PETG / Carbon Fiber.
  • Spanners: Nozzle spanner make nozzle installation and removal easier. Suitable for nozzles with a diameter of 6mm, such as MK8 nozzles, E3D V5 V6 nozzles, etc. Heating block spanner only fit for V6 heat block. Allen wrench makes mounting and dismounting small screws easier..
  • Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material.
  • it is anti-static, non-magnetic precision tweezers..
  • Silicone socks: Will keep your heater block clean and free from burnt and blackened plastic.Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print..
Check Stock

Tool Daily 15 Inch Pressure Washer Surface Cleaner Attachment with Wheels, with 2 Power Washer Extension Wands and 2 Replacement Nozzles, 3600 PSI

  • ...eways, patios, rooftops, walls and sidewalks..
  • Pressure washer extension wands: The length of each wand is 15”. 2 wands are connected with thread to avoid leakage at the connection. The end of the wand is 1/4" quick connect fitting, suitable for most pressure washer attachments with 1/4" quick connect..
  • Replacement nozzles: 2 additional nozzles are attached for replacing the original nozzles when seriously blocked. To avoid the nozzles blocked, please use water inline filter. And when the nozzles are blocked, you can use needles to remove sand or other debris in nozzles and rinse with fresh water..
  • Package include: 1-piece 15 inch pressure washer surface cleaner with 3 wheels, 2-pieces power washer extension wands and 2-pieces power washer replacement nozzles..
Check Stock

Large Ceramic Sandblaster Nozzle Tip: C1 (1/8\ ID) Kennametal Quality, Longer-Lasting Professional Abrasive Blasting Nozzle Tip Replacement + Sandblasting 101 Ebook

  • Aluminum Oxide Ceramic Sandblaster Nozzles offer good service life at a lower price than other materials. C1 Series is the larger sized nozzle for larger blasting applications. Large Length: 3-3/4" (95.3mm). It measures 1-1/8" O.D., tapered to 5/8" O.D..
  • HIGH DENSITY CERAMIC NOZZLES: A higher density equals longer lasting than most other brands. These abrasive blasting nozzles are manufactured with a higher grade that outlast those cheap China based products..
  • HIGH QUALITY, HIGH PERFORMANCE: All ceramic nozzles are not equal -- Kennametal nozzles feature premium grade material..
  • LONGEST LASTING: It's high quality alumina oxide ceramic and its larger size allows more material for a longer lasting nozzle. Actual service life will vary depending on blast pressure, media size, and particle shape..
  • KENNAMETAL QUALITY, USA MADE: These sandblaster nozzles are professionally manufactured by one of the highest respected companies providing unsurpassed wear resistance in abrasion..
Check Stock

Large Ceramic Sandblaster Nozzle Tip: C1 (3/16' ID) Kennametal Quality, Longer-Lasting Professional Abrasive Blasting Nozzle Tip Replacement + Sandblasting 101 Ebook

  • Aluminum Oxide Ceramic Sandblaster Nozzles offer good service life at a lower price than other materials. C1 Series is the larger sized nozzle for larger blasting applications. Large Length: 3-3/4" (95.3mm). It measures 1-1/8" O.D., tapered to 5/8" O.D..
  • HIGH DENSITY CERAMIC NOZZLES: A higher density equals longer lasting than most other brands. These abrasive blasting nozzles are manufactured with a higher grade that outlast those cheap China based products..
  • HIGH QUALITY, HIGH PERFORMANCE: All ceramic nozzles are not equal -- Kennametal nozzles feature premium grade material..
  • LONGEST LASTING: It's high quality alumina oxide ceramic and its larger size allows more material for a longer lasting nozzle. Actual service life will vary depending on blast pressure, media size, and particle shape..
  • KENNAMETAL QUALITY, USA MADE: These sandblaster nozzles are professionally manufactured by one of the highest respected companies providing unsurpassed wear resistance in abrasion..
Check Stock

BONFQERT Automotive HVLP Air Spray Gun Set - Professional Air Paint Kits with 3 Nozzles and 600cc Cups on Top 1.4mm 1.7mm 2.0mm for Paint,Car Primer,Topcoat,Touch-Up

  • 100% BRAND NEW - Aluminum Alloy Body With Chrome Plating For Ease Of Clean Up And Durability..
  • EASY TO CLEAN - Mesh Filter Removes Dirt Particles From paint,Preventing Defects. Stainless steel needles and nozzles are compatible with water based paints..
  • ENVIRONMENTALLY FRIENDLY DESIGN - Adjustable fluid, pattern and air controls. Designed to provide equal atomization and particle size for all kinds of surface painting. Saves 20% paint and provides optimal performance..
  • HUMANIZED CONSIDERATION - Special conical shape of air cap prevents paint from splashing. Mesh filter removes dirt particles from paint, preventing defects. 600cc PVC cup allows viewing of paint fluid level and save time on loading. Copper diverter valve for good air sealing performance..
  • 100% SATISFIED GUARANTEE- We offer 90 days free warranty, customers can rest assured that the use of, if the product is damaged or can not be used, the customer can contact us, we will provide customers with satisfactory solutions..
Check Stock

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
  • {Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....
Check Stock

Hunter Industries PROS06 Hunter Pro 6" Pop-up Sprinkler Spray, Small, Black

  • Highly durable, extra-thick body and cap for leak-free performance.
  • Heavy-duty spring for consistent riser retraction.
  • Compatible with all Hunter MP Rotator nozzles, fixed and adjustable arc nozzles, and specialty nozzles.
  • The Hunter Pro-Spray sprinkler head is compatible with all industry standard female nozzles offering a high degree of flexibility.
Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
  • {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.
Check Stock

25PCS 3D Printer Nozzles, Premium MK8 Nozzle Ender 3 Nozzles 0.4 mm, 3D Printer Brass Nozzles for Makerbot Creality CR-10 Ender3 V2 Ender3 Pro with 5 Needles by Zojicif

  • 【High precision】the inner wall of the 3D printer nozzles is smooth and has no burrs, its viscosity coefficient is small, high precision&perfect aperture, so premium MK8 nozzle can prevent print head from leakage and allow for easy flow of the filament without clogging..
  • 【Premium Quality】Our 3D printer nozzle are made of high quality brass material, heavy duty and provide a long service life, easy to install and change. Our premium MK8 Ender 3 Nozzles input diameter 2.00mm, output diameter 0.4 mm, out thread M6, thread length 5mm..
  • 【Applicability and Compatibility】Our premium MK8 nozzles ender 3 nozzles fit for 3D Printers like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series, compatible-with all 1.75mm PLA ABS 3D printers. Fit exactly like the original..
  • 【Good performance】Our precision 3d printer brass nozzles MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be applied for printing filaments of carbon fiber, fiberglass, etc..
Check Stock

HydroMist Shrouded High-Pressure Oscillating Misting Fan with 8 Nozzle Ring, 3-Speed Cord Control, Mount Bracket, and Black Vinyl Cover Included, 24”, Off-White (1000 PSI Pump Required)

  • High-Pressure Fan: Cool down your residential/commercial spaces with HydroMist. The fan head tilts, oscillates and includes a Chrome Intergraded Misting Ring with 8 Stainless Nozzles and 3/8 fitting to attach to tubing (High-Pressure Pump Required 1000PSI).
  • Outdoor-Rated: Fan head comes assembled w/ sealed motor to protect from rain. Electrolysis nickel plating and weather-resistant finish prevent unsightly weathering. Built-in electrical fuse-in plug protects motor from power surges (2 extra fuses included).
  • Corded 3-Speed Control: Mountable Control Power Box on Fan Cord. Cord length from fan to speed controller: 64”, from speed controller to plug: 96”. Total power cord length is 160”. The fan comes fully assembled. Suggested fan install height: 8-12’.
  • Easy Tilt Ratchet System: Adjust the tilt tool-free by simply pushing the fan head up or pulling it down. As the fan clicks vertically, it will lock in position.
  • Cleaning: HydroMist fans can be used in a complete open aired environment. Cleaning is also easy.
  • simply hose down to wash with a mild detergent and rinse.
Check Stock

Copper Electroplating Kit - 1.5 Gallon

  • Our new and improved copper plating system now gives constant bright copper plating, that requires little to no polishing after plating..
  • Copper can be used to 'electroform', making complete objects from pure copper, by simply making a mold from wax & conductive powder, copper plating the mold, then melting the wax. Copper can also be formed over lead molds, and the lead melted away afterwards. This has some applications for the person wishing to reproduce decals. Copper plating requires 0.07 - 0.2 amps per square inch of part surface area. Higher current gives faster plating times. The system plates at 70°F-90°F..
  • 1 pint of automotive battery acid (not included) is required per 1.5 gallons of copper plating solution..
  • The copper plate can be applied directly over brass, copper or nickel, but cannot plate directly onto steel, pot metal, zinc or aluminum. There are no cyanides in this kit, and its operation creates no waste chemicals or dangerous fumes..
Check Stock