Top Plc Splitter Module

Isolation Amplifiers Isolated Modulator (5 pieces)

  • ➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
  • ➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
  • ➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
  • ➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
  • ➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
Check Stock

Tii 95s-1-12 Whole House Nid Dsl Filter Adsl Pots

  • Module’s unique design provides customer bridging and ADSL POTS splitting - all in one module..
  • Module easily snaps in and out of the customer side of the NID and occupies only one position, thereby not compromising the NIDÂ’s overall....
  • The Tii splitter design makes it possible to use a single phone line to provide triple play services including ADSL2+ and IPTV..
  • With module installed, an additional standard POTS line module is not needed..
  • Module includes Tii’s unique patented switchable RJ-11 Jack. The Auto-Jack does not require an RJ-11 plug for normal operation and delivers....
Check Stock

NOYITO Voltage to Current Module 0-10V to 0-20mA

  • NOYITO Voltage to Current module, 0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V voltage signal conversion to 0-20mA or 4-20mA current signal output, by adjusting the voltage to adjust the size of the current. Can be used to generate the signal source, valve adjustment, inverter control, PLC debugging, instrumentation test, LED test, analog transmitter.003cbr003e.
  • Implement the industry standard voltage (0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V) into an industry standard current (0-20mA, 4-20mA)., linear output, the output signal can be directly connected to the AD converter, with the AD function with the microcontroller connection.003cbr003e.
  • Using single-chip embedded technology. The module is small and easy to use in different places.003cbr003e.
  • Easy to use, can be fine-tuned by potentiometer.003cbr003e.
  • Module working voltage: DC12-24V . 【Please read the product pictures on the left side of the page for the wiring diagram of the product.】003cbr003e.
  • 【Manufacturer's One-year After-sale Warranty】.
Check Stock

WSDMAVIS 2Pcs PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Digital Analog Signal Converter for PLC Signal Interface Switching

  • The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.Allowable error:5%..
  • It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM..
  • The modules are small in size and easy to use in different places.Easy to operate, fine tuned by potentiometer..
  • MCU embedded technology.Work Voltage:DC 12V-30V(Power requirements:> 100MA).
  • Select the PWM signal input level range through short-circuit.The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU.
  • The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller..
Check Stock

0-10V Signal Isolation Module, S-10V10V Analog Quantities Voltage Signal Isolation Module for PLC/MCU Isolating High Voltage or Current (Voltage) Signals

  • ➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
  • ➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
  • ➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
  • ➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
  • ➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
Check Stock

Kuuleyn Frequency to Voltage Converter Module,1-3KHZ 0-10V PWM Signal to Voltage Converter Module Digital Analog Board

  • This module is easy to wire and convenient to use.
  • PWM converts digital signals into analog signal (0 to 10V).
  • Input digital signal can be 5V or 24V level 0-100% PWM signal.
  • Output analog signal can be 0-10v voltage or 0-5v voltage.
  • Can be used for industrial control panel PLC or other signal interface switching.
Check Stock

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

  • AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
  • CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
  • AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
  • WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..
Check Stock

40T-Performance E85 Flex Fuel Sensor Mount/Bracket Bypass Module - Robust Mount For FULL FLOW from your E85 Flex Fuel Sensor to Fuel Rails - Solid 6061 Billet - 6AN and 8AN Fittings Included

  • ... fittings to make your own bypass saving you time! Cean look install, with O-rings at all connections for robust leak free operation and no messing with single use crush washers. Keep it simple and avoid the risk of leaky fuel in an engine bay.
  • Have a V6 or V8? Run it as a splitter with 6AN feed to each rail to get the benefit of full equalized fuel pressure & flow to each rail for maximum performance. 8AN feed and 6AN split can support up to 1000 HP on e85. Compatible with any sensor with tube length 95 mm x 9.5 mm diameter incl. GM 13577429 / 13577379, AC Delco 13507128, Continental, VDO & AEM 30-2200 30-2201 sensors.
  • Solid 6061 Billet Alum construction Includes 6AN & 8AN in/out fittings, 6AN plugs and a 6AN fitting to use the module as a splitter. Includes all special seals and allen keys. You will need to adapt the module to your existing fuel system. DOES NOT INCLUDE SENSOR.
  • Ships with same day processing when ordered by 3 PM PST / 6 PM EST. Fast & FREE 1 - 3 day priority mail! Limited time new release pricing! Hassle free 1 year warranty against any defects. We encourage questions and are always happy ....
Check Stock

DC 24V PLC Control Programmable Logic Controller FX1N-24MR Industrial Control Board 14 Input 10 Output 24V 5A PLC Transistor Output

  • High Performance: This PLC industrial control board can support connecting text screen and connecting touch screen, which is stable and reliable..
  • Premium Quality: This PLC industrial control board is made of high quality electric component, which has reliable quality and long service life..
  • Compact Size: This PLC industrial control board has a compact small size, which is portable and easy to operation..
  • Wide Application: This PLC industrial control board is mainly used in a variety of industrial automation control applications..
  • High Speed Input and Output: This PLC industrial control board is high speed 16 Input 16 Output..
Check Stock

HDMI Splitter 1 in 4 Out 4K, HBAVLINK 4 Port HDMI Splitter Powered Video Splitter 4 Outputs w/HDMI Cord+ AC Adapter, Duplicate/Mirror Screens for Fire Stick/Roku/DirecTV/Cable Box/Security Cameras

  • 1×4 HDMI Splitter – This HDMI Splitter 1 in 4 out duplicates/mirror 1 HDMI Audio &Video Signal to 4 identical displays without signal loss (Note: ❤️Duplicate/mirror images, not for extended display.
  • For extended display, search this asin: B09TJLLLQM.
  • ❤️Not 4 in 1 out HDMI Switch, can NOT add additional hdmi ports for TV).
  • Long transmission distance – This powered hdmi splitter is with built-in signal amplification module, which can help guarantee 50 feet transmission in input side, and 66 feet length in output side, without freezing, while using AWG22 HDMI 2.0 Cable.
  • Widely Compatibility – hbavlink four way hdmi splitter 1 input 4 output is fully Compatible with HDMI V1.4/1.3/1.2, support HDCP 2.0, easily duplicate/mirror HDMI Signal for devices with standard HDMI interface. Works perfectly with Fire tv Stick, Roku stick, Blu-Ray Player,DVD player,DirecTV Receiver Box,Satellite tv box, Cable box,DVR, NVR, Bell ExpressVu PVR,Apple TV, IPTV, Xiaomi TV, Andriod receive box, Satellite Receiver, etc..
  • 4K Ultra HD Resolution – hbavlink 4K HDMI Spliter supports full HD 1080P and 3D resolutions, it can reach up to 4096×[email protected](YUV 4:2:0 only, not support YUV 4:4:4), deep color 480i/576i/576p/720p/1080i/1080p, full Video format 3D,....
Check Stock

VTech IS8101 Accessory Handset for IS8151 Phones with Super Long Range up to 2300 Feet DECT 6.0, Call Blocking, Connect to Cell, Headset jack, Belt-clip, Power backup, Intercom and Expandable to 12 HS

  • Type: RJ11 6P4C Male-2 Female Socket RJ11 6P4C male TO double 6P4C Female Telephone Adapter Cable..
  • RJ11 Phone Splitter helps to insert two devices such as telephone, fax, modem,answering machine into wall jack.Phone module adapters can also use fax machines as well as phone.The module contains a male header and two female headers.Because all four pins are pins, two lines can be divided into two outputs as needed..
  • Ease of Use: This modular cable is very easy to use.Connect this product to the RJ11 telephone socket and then connect the RJ11 cable (not included) to this product.One end is 6P4C Osplug, and the other end is two 6P4CRJ11 sockets..
  • Durable material: This telephone adapter is made of durable plastic material.Telephone adapter can be used for all phones and fax machines,office meetings,home entertainment,learning helper..
  • Material: Made of black ABS plastic material,non-toxic and harmless, long-term use.Service: If you are not satisfied with our products, please feel free to contact us..
Check Stock

Ethernet Splitter [Paired Use Only] Network Cable Y Division Adapter LAN Cord 1to2 Port Separator Internet line Segregator 1 to 2 Way Hub Connector for RJ45 Cat5/Cat5e/Cat6/Cat6a/Cat6e/Cat7 [2-Pack]

  • Please NOTE: Equipped with a 1.2m/4ft USB charging cable, it can support charging and networking at the same time. CAN NOT be used without connection..
  • Ethernet Splitter 1 to 2: This RJ45 ethernet splitter is mainly used to solve the connection problem caused by insufficient wiring, Use the USB power supply cable and support two computers to share one Ethernet line simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously..
  • Transfer Speed: RJ45 Splitter Adapter can divide a network cable into two outputs, the speed of each cable group (1 and 2) can only reach 100Mbps.And the signal transmission of two cable groups will not interfere with each other..
  • Transmission More Stable: The Network Splitter Ethernet Built-in Thick Environmental Protection PCB Circuit Board, RJ45 Eight-core Standard Jack, Gold-plated Pin Core, Integrated Mechanical Welding, More Stable Transmission Signal, it is more convenient to design closed insulation module and safer to use..
  • Wide Compatibility: RJ45 8P8C LAN Ethernet Splitter connector extender is compatible wi....
Check Stock