Top Pll Waveform Generation

AUNE X1s GT DAC with Headphone AMP, PLL Technology Desktop HiFi Decoder

  • PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better..
  • Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical..
  • Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding..
  • Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music..
Check Stock

UNI-T MSO3000E Series Digital Oscilloscopes 250MHZ 2CH, 50MHz Built-in Waveform Generator

  • Product 1: UNI-T Arbitrary Waveform Generator UTG932. Dual channels. Ch1 - Ch2 combining. Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Product 1: Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Output frequency range: 1μHz-30MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • Product 2: 150MHz bandwidth. 2 channels, wide vertical range: 1mV/div to 20V/div. Automatic measurement of 32 waveform parameters. New interface style. Widescreen display. 7 inches TFT LCD WVGA, RGB. 800×480 resolution. Multilingual menu available..
  • Product 2: 1GSa/s sampling rate. Storage of waveform setups and interface waveform and setup reproduction. Unique waveform record and replay function. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device. USB drive system software upgrade..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

DSO138 Oscilloscope, DIY Mini Oscilloscope DSO-138, 2.4″ TFT 1MSPS Digital Oscilloscope Kit Handheld Pocket Sized 13803K (Welded Version)

  • 【WIDELY USE】DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay). Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
  • 【EXCELLENT QUALITY】This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • 【PRODUCT FEATURE】DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function)..
  • 【NO NEED SOLDERED】DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • 【DIY DESIGN】Adjustable vertical displacement and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

UNI-T MSO3000E Series Digital Oscilloscopes 4CH, 50MHz Built-in Waveform Generator (MSO3254E 250MHz 4CH)

  • Product 1: UNI-T Arbitrary Waveform Generator UTG962. Dual channels. Ch1 - Ch2 combining. Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Product 1: Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Output frequency range: 1μHz-60MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • Product 2: 150MHz bandwidth. 2 channels, wide vertical range: 1mV/div to 20V/div. Automatic measurement of 32 waveform parameters. New interface style. Widescreen display. 7 inches TFT LCD WVGA, RGB. 800×480 resolution. Multilingual menu available..
  • Product 2: 1GSa/s sampling rate. Storage of waveform setups and interface waveform and setup reproduction. Unique waveform record and replay function. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device. USB drive system software upgrade..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

RIGOL MSO5354 350 MHz Mixed Signal Oscilloscope with 4 Analog Channels and UltraVision II High-Speed Oscilloscope Free Bundle Option MSO5000-BND

  • 50MHz Function Generator, 2 Channel, 250MSa/sec, 16Bit Resolution, 16M Memory.
  • SiFi II 16Bit Resolution with 250MSa/s sampling for increased signal fidelity.
  • Advanced generation capabilities like Dual-Tone, Harmonics, and Sequencing.
Check Stock

DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Pocket-Size Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Electronic Learning Set, Assembled Vision (Welded)

  • This DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • This oscilloscope board uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
  • 2.4″ Oscilloscope with automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
  • 2.4 inch TFT handheld pocket-size digital oscilloscope with waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • Partially open-sourced,the MCU has been programmed, adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

2 in 1 Digital Oscilloscope Multimeter, Scope Meter with 2.5 Msps High Sampling, 2.4 Inch Color Screen, Automatic Waveform Capture Function, DC/AC Voltage/Current Frequency Resistance Diode Test

  • More Accuracy & Efficient: Dedicated chip, high speeds sampling rate and high bandwidth, automatic waveform capture function, one-key transform to waveform function furing measuring, software calibration technology,memory calibration coefficients, to improve your work efficiency..
  • With Multimeter Function: This 2 in 1 oscilloscope multimeter is suitable for diagnosing automotive, industrial and household electrical problems. This electrical tester is auto-ranging and 4000 counts, can accurately measure AC/DC voltage, resistance, AC/DC current, capacitance, frequency, diodes, continuity..
  • One-button oscilloscope: no need oscilloscope probe, measuring waveform directly. Fast and accurate measurement, clear waveform display. 3 waveform scanning modes: automatic/conventional/single. Mass storage, 100 data/10 waveforms..
  • Support Multi Waveform Parameters: When measuring waveforms, you can set parameters independently, such as: time base, amplitude, waveform scanning mode, etc..
  • LED Backlight & Storage / Readout -Analog broadband range up to: DC/AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 240x320 color screen with LED backlight which is always on.More clear and suitable for working at night..
Check Stock

FNIRSI 1014D Digital Storage Oscilloscope 100MHz Dual Channel Oscilloscope Signal Generator

  • ...ure 0 ~ 4000V. Up to 12 parameters measurement：VPP，VP，Vmax，Vmin，Vavg，Vrms，Frequent，Duty+，Duty-，Time+，Time-，Period.
  • Cursor measurement function, it is convenient to manually measure the period and frequency and voltage. Complete triggering function (single, normal, automatic). At any time, the waveform display (pause function) is frozen. Equipped with high efficiency One-button AUTO.
  • One-button waveform storage and screenshot. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc..
Check Stock

Tablet Oscilloscope,Digital Touch Screen Storage Oscilloscope Kit,with 2 Channel 100Mhz Bandwidth 7 inch Screen,Multi Functional Ultra Thin Portable USB Oscilloscope

  • ...the product. If you have any questions, you can contact us. ).
  • Fully matched 7-inch TFT LCD color display with a resolution of 800 * 480, bright colors and high contrast. The capacitive touch panel is similar to the touch mode of modern tablet computers..
  • Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data. The powerful waveform image Manager supports browsing, viewing, viewing detailed information, turning pages, deleting and zooming, zooming and navigating waveforms..
  • High measurement voltage range, 1X can measure 0-40V, 10X can measure 0-400V, 100X can measure 0-4000V. Up to 12 parameter measurements: VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty , Duty-, Time , Time-, Period. This USB oscilloscope is equipped with a USB interface and can be connected to a computer to share its screenshots with the computer, which facilitates secondary analysis..
  • Memory compression technology, waveform refresh screen does not flicker.
  • Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
  • FFT display function, can analyze the sp....
Check Stock

UNI-T UTG932 + UTP1306, Function Generator and Switching DC Power Supply Kit

  • Mini palm-sized signal generator Palm-sized signal generator, your personal signal output source, bring you a different sense of experience.
  • 60 MHz MAX. OUTPUT FREQUENCY 200 MSa/s SAMPLE RATE 14 bits VERTICAL RESOLUTION 2 CHANNELS - ARBITRARY WAVE LENGT.
  • Standard 2 Channel, multiple waveform signals Maximum output frequency 60MHz, dual channel, multiple waveform signals: sine wave, square, ramp, pulse, noise, DC, arbitrary waveform.
  • Modulation function Easy-to-use modulation types: AM, FM, PM, FSK Built-in 24 arbitrary waveforms 24 kinds of non-volatile digital arbitrary waveform storage.
  • UTG932E 30 MHz 200 MSa/s 14-bit 2 UTG962E 60 MHz 200 MSa/s 14-bit 2.
Check Stock

USB Oscilloscope, PC Based Dual Channel 25MHz Digital Oscilloscope, Handheld Mini Digital Storage Oscilloscope, Multi Functional, MIT USB Isolation, with Probe

  • ▶▶PC virtual oscilloscope◀◀ dual-channel virtual oscilloscope, the detected waveform can be displayed on the computer, image storage, display on the same screen and other multi-function computer virtual oscilloscope..
  • ▶▶Advanced◀◀ dual-channel input, 25Mhz bandwidth, 100MS/s sampling rate, 5K storage depth, fast acquisition speed, and general test requirements can be met..
  • ▶▶Weak attenuation◀◀ The 25Mhz sine wave amplitude measured by the VDS1022I oscilloscope is 904mV, according to the international standard (-3dB attenuation, 707mV), which is better than the international standard and presents a perfect waveform..
  • ▶▶Function◀◀ single channel/alternate channel trigger.
  • X-Y/FFT waveform display on the same screen.
  • 18 groups of values can be measured simultaneously.
  • multi-function to meet your measurement needs..
  • ▶▶Data recording◀◀ The waveform can be recorded/saved, and the maximum storage is 4000M, which can be read at any time. The waveform is perfect. It is a good helper for papers..
Check Stock

ALMOCN for Digital Oscilloscope Kit Open-sourced 2.4″ TFT 1MSPS for Digital Oscilloscope DIY Kit Handheld Pocket Sized 13803K, SMD pre-soldered

  • Digital DIY Oscilloscope Kit uses ARM Cortex-M3 processor (STM32F103C8), 2.4-inch color TFT display screen can be used as ARM test development board. Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
  • Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.Adjustable vertical displacement, and with instructions..
  • With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable..
  • With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..
Check Stock