Top Plumb Back Valve

Aqua Plumb 1558020 CUPC AB1953 Kitchen Sink Faucet with Pull-Out Sprayer by Aqua Plumb | Polished Chrome Single Handle Kitchen Faucet, Single or 3 Hole Installation

  • ATTRACTIVE CLASSIC DESIGN: The Aqua Plumb Kitchen Faucet is constructed in a classic design with a brilliant chrome finish. Upgrade your kitchen with our modern Kitchen faucet..
  • PULL-OUT SPRAYER INCLUDED: Our 3 Hole Kitchen Faucet includes a convenient pull-out handle sprayer to make washing dishes and cleaning the sink easier. Solid metal construction for durability and reliability..
  • WATER SAVING: Designed to cut back on water usage without affecting the water flow. Our faucet has a water saving aerator with a 2.0 GPM output..
  • MEETS SAFETY REQUIREMENTS: Aqua Plum builds faucets that meet the highest quality standards by conforming to the NSF/ANSI 372, IAPMO, UPC, cUPC, NSF, AB1953 and are ADA/Handicap approved. Ultra Low Lead Compliant..
  • LIMITED LIFETIME WARRANTY: Aqua Plumb is so sure that their products will meet and exceed your standards that they offer a limited lifetime warranty..
  • 8" or 1-hole polished chrome pull-out kitchen faucet.
  • Solid metal construction for durability and reliability.
  • Aqua Plumb faucets meet all necessary codes and requirements.
Check Stock

STANLEY Plumb Bob, Brass, 16-Oz (47-974)

  • Polished-lacquer, solid-brass construction of the plumb bob is durable and rust resistant.
  • Replaceable, hardened steel tip of the plumb bob with string is long-lasting.
  • Screw top simplifies attaching string to center of plumb.
Check Stock

IRWIN Tools 2050 Magnetic Box Beam Level. 24-Inch (1794076), Blue

  • Continuous edge increases level durability to ensure accuracy over time, protects center vial bubble, and allows for continuous scribing..
  • Plumb Site offers dual-sided, undistorted viewing in the plumb position and easy, more accurate plumb readings..
  • Retractable end-caps allow for scribing into and through corners, increasing work efficiency..
  • Rare earth magnets are 5 times stronger than strip magnets and allow for easy, hands-free steel construction work..
Check Stock

DreamLine Enigma-XO 56-60 in. W x 76 in. H Fully Frameless Sliding Shower Door in Polished Stainless Steel, SHDR-61607620-08

  • Premium 3/8 in. (10 mm) thick certified tempered glass.
  • DreamLine exclusive ClearMax water and stain resistant glass coating.
  • ATTENTION! Offers NO adjustment for out-of-plumb (uneven) walls and requires plumb walls.
  • Model can be trimmed up to 4 in. for width adjustment.
  • IMPORTANT! Measure the width of your shower space AFTER walls are finished (tile, back walls, etc.).
  • Threshold depth of at least 2 3/4 in. required.
  • Professional installer (2 person team) required.
  • Limited Lifetime Manufacturer Warranty (Oil Rubbed Bronze or Satin Black finish is limited to 1 year).
Check Stock

DreamLine Enigma-XO 56-60 in. W x 76 in. H Fully Frameless Sliding Shower Door in Brushed Stainless Steel, SHDR-61607620-07

  • Premium 3/8 in. (10 mm) thick certified tempered glass.
  • DreamLine exclusive ClearMax water and stain resistant glass coating.
  • ATTENTION! Offers NO adjustment for out-of-plumb (uneven) walls and requires plumb walls.
  • Model can be trimmed up to 4 in. for width adjustment.
  • IMPORTANT! Measure the width of your shower space AFTER walls are finished (tile, back walls, etc.).
  • Threshold depth of at least 2 3/4 in. required.
  • Professional installer (2 person team) required.
  • Limited Lifetime Manufacturer Warranty (Oil Rubbed Bronze or Satin Black finish is limited to 1 year).
Check Stock

General Tools 790-8 Hexagon Steel Plumb Bob, 8 Ounce

  • General Tools professional quality Plumb Bobs have been a staple of the masonry, carpentry and surveying industries for more than 50 years.
  • General Tools steel plumb bobs feature a hexagonal body of cold-drawn steel with nickel plating.
  • Features a removable cord cap for easy cord replacement.
  • This plumb bob weighs 8 oz and is 4 inches long and 7/8 inches wide.
  • Includes a 10 foot long 3mm braided cord and a removable cap for adjusting and replacing the cord.
Check Stock

DreamLine SHDR-6348760-04 Shower Door, 44-48\ W x 76\ H, Brushed Nickel

  • Quality 5/16 in. (8 mm) thick certified clear tempered glass.
  • DreamLine exclusive ClearMax water and stain resistant glass coating.
  • Specially designed rollers create a smooth, quiet gliding operation.
  • Dual towel bars double as handles on each panel.
  • Aluminum water guards accommodate up to 1/4 in. for out-of-plumb (uneven) walls.
  • Model can be trimmed up to 4 in. for width adjustment.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Minimum threshold depth of 2 3/4 in. is required for proper installation.
  • Drilling into the threshold is required for installation of this product.
  • Double sliding bypass configuration allows entry from left or right side.
  • Anodized aluminum water guards allow 1/4 in. for out-of-plumb (uneven walls).
  • Top and bottom guiderails can be trimmed 4 in. for width adjustment.
  • 5/16 in. (8 mm) ANSI certified clear tempered glass.
Check Stock

TAJIMA Plumb Bob - 14 oz (400g) Plumb-Rite with Quick-Stabilizing Cap & Embedded Bumpers - PQB-400

  • QUICK STABILIZATION – Quick-stabilizing bob steadies within 6 seconds.
  • SURFACE PROTECTION - Embedded side bumpers protect both the bob and work surfaces.
  • THICK ELASTOMER TIP GUARD - Guard keeps the bob tip safe and secure.
  • CHROME-PLATED DESIGN - The plumb bob is chrome-plated to resist rust and corrosion, and maintain long-lasting usability.
  • EASY PLUMB LINE CONNECTION - Comes standard with snap ring to easily connect and disconnect to/from plumb line.
Check Stock

DreamLine SHDR-176076G-09 Frameless Sliding Shower Door, 58-60 in. W x 76 in. H, Satin Black

  • Quality 5/16 in. (8 mm) thick certified clear tempered glass.
  • DreamLine exclusive ClearMax water and stain resistant glass coating.
  • Specially designed rollers create a smooth, quiet gliding operation.
  • Dual towel bars double as handles on each panel.
  • Aluminum water guards accommodate up to 1/4 in. for out-of-plumb (uneven) walls.
  • Model can be trimmed up to 4 in. for width adjustment.
  • IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls, etc.).
  • Minimum threshold depth of 2 3/4 in. is required for proper installation.
  • Drilling into the threshold is required for installation of this product.
  • Double sliding bypass configuration allows entry from left or right side.
  • Anodized aluminum water guards allow 1/4 in. for out-of-plumb (uneven walls).
  • Top and bottom guiderails can be trimmed 4 in. for width adjustment.
  • 5/16 in. (8 mm) ANSI certified clear tempered glass.
Check Stock

HornBlasters Outlaw Black Train Horn Only - 3 Trumpets - Big Sound

  • Heavy Duty Stealth Black Finish - The Outlaw horn is perfect for those wanting a low-profile horn with a huge sound. Don't let the size fool you, this horns sounds massive! Ready to install with a stealth black finish, this horn is the perfect addition to any vehicle..
  • 3-Chime Construction - With 3 trumpets mounted on one bracket you can't go wrong! With a manifold design, installation has never been easier. Just mount the bracket to your vehicle with the provided mounting hardware and you're done! Plumb in your air supply and you're ready to honk!.
  • Stainless Steel Diaphragms - We use stainless steel diaphragms in our horns to ensure the horn will last for years to come. These diaphragms will never rust out..
  • Deep Tone - This horn was designed with a large throat to provide a deeper tone. This isn't a wimpy air horn, this is a deep and powerful sounding train horn!.
  • Pre-installed Air Valve - This horn is ready to accept 1/2" airline at a moments notice. Wire the solenoid to your activation switch/button and you are set!.
Check Stock

Hexagon Steel Plumb Bob General Level Plumb Bob with 4.5 m Messenger Wire 8 Ounces Plumb Bob Tool Straight Level Setter for Surveyors, Excavation, Foundation

  • Package includes: you will get 1 piece of hexagon steel plumb bob with 4.5 m braided cord and a removable cap for adjusting and replacing the cord, complete combination for easy and convenient use in daily life.
  • Suitable size: this general level plumb bob weighs 8 oz and measures 4 inches long and 7/8 inches wide, proper size for effortless use and store without taking up too much space, also you can carry it out for outdoor use anytime if you need.
  • Quality material: our plumb bob tool is composed of solid steel construction with -plated surface, durable with chromium rust-resistant finish, reliable to apply for a long time without easily breaking or damaging, you can apply it with confidence.
  • Humanized design: the hexagon-shaped tip of straight level setter prevents it from rolling to ensure precise measurements, greatly improving your work efficiency and ensuring your safety.
  • Wide application: the hexagon steel plumb bob is great for lining up and transferring points, especially suitable for surveyors, excavation contractors and foundation contractors, also there are more functions waiting for you to find out.
Check Stock

Delta Shower Doors SD3957012 Classic Semi-Frameless Contemporary Sliding Shower 60\x71\

  • Hardware Finish – Chrome | Quality 1/4 in. (6mm) thick Clear certified tempered glass | Pictured SlimLine shower base is not included (sold separately).
  • Dimensions – 44-48” W x 1” D x 72” H | Weight – 92.59 lbs. | Fits openings from 44” up to 48” | Walk-through – 15-19” W x 70.25” H.
  • Configuration consists of a Stationary Panel and Sliding Door.
  • Convenient towel bar on the Stationary Panel | Reversible for a right or left door opening to fit your specific layout.
  • Up to 1 in. adjustment per side for out-of-plumb (uneven) walls within wall profiles | Up to 4 in. for width adjustment by trimming guide rails.
  • Configuration consists of a Sliding Door and a Stationary Panel.
  • Unit reversible for a right/left door opening to fit any layout. Wall profiles allow up to 1 in. adjustment per side for out-of-plumb (uneven walls).
  • 1/4 in. (6mm) thick ANSI certified tempered glass. Chrome finish.
  • Optional SlimLine matching shower base sold separately. IMPORTANT! All measurements should be taken only AFTER walls are finished (tile, back walls).
  • Professional installation recommended. Limited Lifetime Warranty.
Check Stock