Top Plumbing Pipe Crimping Tool

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...ch effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Ma....
Check Stock

SharkBite 22187-0000LFA Ball Valve 1 Inch x 1 Inch, Water Valve Shut Off, Female, FNPT, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: 1 inch ball water valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating Applications..
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX pipe tubing meets the same standards for commercial and residential plumbing applications.
Check Stock

Stark 3PCS Aluminium Pipe Wrench Adjustable Jaw Plumbing Pipe Wrench (14\ 18\ 24\ inch) Pipe Wrench Set

  • Widely Application - Suitable for all pipe related home improvement repairs that need a tight grip, such as gas tank repair, household plumbing, vehicle maintenance. The deep grooved teeth of each straight pipe wrench lock in place to provide a confident grip around smooth, round surfaces like showerheads or bathroom sinks and drains.
  • Self-Cleaning Design - The pipe wrenches feature self-cleaning threads on the jaws and non-stick adjustment nuts that clean away grime from the hook jaw shank for reliable tool use.
  • Full Floating Forged Hook Jaws - The Stark pipe wrenches feature full floating forged hook jaws for superior gripping and quick adjustments when carrying out pipe work.
  • Lighter than Comparable Iron-Models - It delivers the unsurpassed durability and ease-of-use that all heavy-duty wrenches are known for.
  • 14" 18" 24" inch - The Wide Range of the Aluminum Straight Pipe Wrench is a plumbing wrench that offers professional strength and quality in a convenient, lightweight tool.
Check Stock

SharkBite U256LFCP 3/4 Inch 90 Degree Elbow Push to Connect Pipe Fitting, 10 count, Brass

  • INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue.
  • Just push to create a quick watertight union with SharkBite pushfit connectors.
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination.
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines.
  • PREFERRED BY THE PROS: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: All SharkBite valves, joints, and adapters are manufactured and tested in the USA.
Check Stock

Hydraulic Copper Pipe Tube Fittings Crimping Tool with 1/2,3/4 and 1-inch Dies for ProPress Copper Pipe Fitting,Can t crimp Tee Fitting

  • Different with similar hand tool that relies on leverage and hand power, our hydraulic crimping pliers is designed with hydraulic cylinder which is....
  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of....
  • Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.
Check Stock

Steel Dragon Tools® 50767 Model 258 Power Pipe Cutter, Pipe Cutting Machine for 2-1/2-Inches to 8-Inch Schedule 10/40 Steel Pipe

  • 【Wide Applications】 - The heavy duty aluminum pipe cutter is suitable for cutting hard materials such as copper pipe, aluminum pipe and thin stainless steel pipe, the cutting range is from 5 to 50mm, suitable for electrical, air conditioning installation, automotive and other plumbing installation and maintenance, plumbing tools.
Check Stock

SharkBite 1 Inch Ball Valve, Push to Connect Brass Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22223-0000LFA

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

DOMINOX 1-1/4 Inch PEX PVC PPR Cutter Two-handed Large Pipe Cutter Heavy Duty Ratchet Replaceable Blade, Suitable for Home DIY, Maintenance, Professional Plumber

  • HIGH QUALITY BLADE: Pipe cutter with SK5 material blade coated with Teflon, so that the overall hardness of the blade, strong toughness, surface oxidation is not easy, longer life. The triangle design at the edge of the knife allows better access to the pipe..
  • SAFE & EFFICIENT: The plumbing tools cutter ratchet wheel is arranged at the bottom of the blade to prevent accidental rebound when the pipe cutter is pressed, and automatic locking when cutting. The buckle at the bottom of the knife body can lock the knife handle when not in use for carrying and storing..
  • COMFORTABLE HANDLE: The Plumbing tools pipe cutter is ergonomically designed to allow the user to work with one hand closer to the palm of the hand, increasing comfort and reducing pressure on the palm and fingers..
  • MULTIPLE CHOICE: Tubing cutter has two different options, the maximum size of the opening for 1-1/2" O.D., work for cutting pipe diameter of 1 1/4 ". Suitable for a variety of environments and pipe size requirements. Suitable for plumbers, assemblers and mechanics. Suitable for plumbing, heating systems and factory engineering..
  • DOMINOX DEBURRING: The deburring tool device helps to trim the inner pipe after the pipe is cut and remove excess burrs. Make the pipe wall cleaner, to preven....
Check Stock

SharkBite 1/4 Inch to 1 Inch Depth Gauge and Pipe Deburring Tool, Copper, PEX, CPVC, PE-RT, HDPE, U702A

  • SHARKBITE BRASS PUSH DEPTH GAUGE AND DEBURRING TOOL: SharkBite depth gauge and pipe deburring tool is ideal for deburring the outside of a copper pipe to remove any sharp sections or burrs.
  • marks the proper insertion depth for SharkBite plumbing fittings.
  • COMPATIBILITY: Deburring tool is compatible with 1/4 to 1-inch-sized PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • DURABLE: PVC deburring tool is composed of lightweight and durable plastic.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

PVC Pipe Inside Cutter Plumbing Inside Cutter Internal Plastic Pipe Cutter with Grinding Wheel for Plastic Pipe Cutting Replacement (Classic Color)

  • Package includes: you will receive 1 piece of PVC pipe inside cutter and 1 piece of grinding wheel, which are helpful for replacement on your household and technical work and serve 2 different functions of cutting and grinding.
  • Lasting material: the plumbing inside cutter is made of carbon steel material with durability and hardness, and the smooth surface is resistant to rust and wear, providing a long service life and practical experience of working.
  • Practical design: the internal plastic pipe cutter is designed with the saw-toothed blade for fast cutting, and the grinding wheel helps to make the cut surface smooth and flat.
  • Collocating with the grinding wheel, the pipe cutting tool would effectively improve your working efficiency.
  • Convenient and portable: with the small size of 10.5 x 3 cm/ 4.1 x 1.2 inch and individual weight of 93 g, the plumbing internal cutter is compact and easy to carry, which is suitable for cutting plastic pipes from inside.
  • Easy to install: the plumbing tool cutters are available to attach to the power drill and move to cut the pipes.
  • It is appropriate to be handheld and simple to apply for household working and experienced people.
Check Stock

AMZCNC Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2 ,3/4 and 1 Jaw Copper Pipe Propress Crimper Pressing Pliers

  • 【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings....
  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of....
  • 【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings..
Check Stock

Anbull Hydraulic Copper Tube Crimping Tool,Copper Pipe Fittings Crimping and Plumbing Tool with Crimping Dies Jaw 1/2 3/4 1

  • 【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings....
  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of....
  • 【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings..
Check Stock