Top Plumbing Solder Blanket

Harris 45KPOP Brazing Kit, 1225-1370 F, w/1.75 oz Flux

  • Professional torch tool kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-3 tip soft solders up to 1-Inch. GA-11 soft solders up to 3-Inch. Compare with Turbo Torch.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for B acetylene cylinders.
Check Stock

Stampede Stills 20oz Copper Half Gallon Widemouth Mason Jar Thumper Kit

  • Made from 20 ounce copper sheet, silver based lead-free solder, gasket, and is 1/2" copper pipe. The inlet pipe has an elbow to prevent hot spots on....
  • 1/2" copper pipe stubbed out for easy plumbing to your existing still. Additional pipe/coupling/unions to connect to your setup are NOT included as....
  • Works on 1/2 gallon canning Mason jars with standard wide mouth lids..
  • Works on widemouth mason jars (setup requires prior ownership of 1/2 galllon jar and band to work).
Check Stock

Welding Blanket heavy duty 4x6 ft 850GSM Thick 24 Sq Ft High Temp Welding Blanket Fireproof Soldering Blanket Welding Floor Blanket Welder blanket Welding Blankets Fire Blankets for Welding Fiberglass

  • [HEAVY DUTY WELDING ACCESSORIES] Welding blanket for smoker comes with size 6' x 4' (122x183 cm), thickness: 0.04” (1 mm). Welding blanket fireproof is made of 850 GSM (24.7 oz/yd²) reinforced, strong, durable & tear resistant fiberglass material. Welding blankets serve as an excellent shield against heat and fire. Kevlar stitched fine edge, highly pliable. Soldering blanket has tight weaving pattern, 30 x 30 per inch² to keep it bound together and reduce wear and tear for ultimate durability..
  • [EASY TO USE] 1 grommet (0.43" diameter) on each edge. Easy to hang small welding blanket heavy duty as curtain if needed. OR drape over equipment or floor as a protective curtain to shield from ember, sparks, fire, or heat from welding equipment. Use LEBERNA high temp welding blanket for insulation in industrial or home projects. Welder blanket welding tarp shields against grill or smoker heat, fireplace & grinding debris. It is light weight foldable and shields barbeque bbq equipment..
  • [SAFE THERMAL PROTECTION] Fire retardant blankets have high thermal protection capability and withstands working temperatures up to 1,022℉ (550℃). Fire retardant blanket is ideal for MIG, TIG, and other welding application. Fire retardant mat is highly effective in prote....
Check Stock

Goss KX-10MC Soldering Brazing Torch Kit for \MC\ Acetylene Tanks Includes GA-5L Ignitor Tip with Turbine Flame

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes GA-8L EZE-Lite Tip Target Tip that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator for "MC" Cylinder, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-8L soft solders up to 2-Inch and silver brazes up to 1-Inch.
Check Stock

Stampede Stills Copper Quart Widemouth Mason Jar Thumper Kit with Quart Jar Sleeve

  • Made from 20 ounce copper sheet, silver based lead-free solder, gasket, and is 1/2" copper pipe. The inlet pipe has an elbow to prevent hot spots on....
  • 1/2" copper pipe stubbed out for easy plumbing to your existing still. Additional pipe/coupling/unions to connect to your setup are NOT included as....
  • The Stampede Stills Quart jar insulator is great for all drinking occasions and works well to insulate the jar during use..
  • Works on widemouth mason jars (setup requires prior ownership of quart jar and band to work).
Check Stock

Goss KX-3B Soldering Brazing Torch Kit for \B\ Acetylene Tanks with GA-3 and GA-11 Target Tips and Hot Turbine Flame

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes GA-5L EZE-Lite Tip Target Tip that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator for "B" Cylinder, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-5L soft solders up to 1-1/2-Inch and silver brazes up to 3/4-Inch.
Check Stock

Goss KX-5B Soldering Brazing Torch Kit for \B\ Acetylene Tanks with GA-5 Target Tip with Hot Turbine Flame

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-3 tip soft solders up to 1-Inch. GA-8 soft solders up to 2-Inch. Compare with Turbo Torch.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for MC acetylene cylinders.
Check Stock

Goss - 328-KX-4B KX-4B Soldering Brazing Torch Kit for \B\ Acetylene Tanks with GA-5 and GA-14 Target Tips and Hot Turbine Flame

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes GA-5L EZE-Lite Tip Target Tip that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator for "MC" Cylinder, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-5L soft solders up to 1-1/2-Inch and silver brazes up to 3/4-Inch.
Check Stock

Essmetuin Lead Free Solder Wire(Sn99.3Cu0.7) For Plumbing Solder/Stained Glass/Crafts/Jewelry 217℃ Melting Point 2.0MM No Flux,ROHS (3.2oz)

  • Wire Content: Alloy Tin 99.3% Copper0.7%.
  • Melting Point: 217 ℃ (422.6F), Do Not Contain Flux, Need To Use With Flux.
  • Applications: Widely Used In Stained Glass, Artware, Home Diy, Copper Pipe Welding, General Solder With Crafts.
  • Lead-free Meet Quality Standards Of The Uniform Plumbing Code And Meet A Criterion With Drinking Water.
Check Stock

Goss KX-6MC Soldering Brazing Kit for \MC\ Acetylene Tanks with GA-3 and GA-8 Target Tips and Hot Turbine Flame

  • Professional torch tool kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-5 tip soft solders up to 1 1/2-Inch. GA-14 soft solders up to 4-Inch. Compare with Turbo Torch.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for B acetylene cylinders.
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....
Check Stock