Top Plunge Router For The Money

DEWALT Router, Plunge Base, 10-Amp, 2 HP (DW621)

  • DEWALT router features full-wave electronic variable speed motor with soft start runs at 8,000-24,000 rpm with constant speed under load to ensure a quality finish in all materials.
  • Rack and pinion depth adjuster with micro-fine adjusting allows quick, accurate set-up for DEWALT plunge router.
  • Integral dust collection system efficiently removes chips and provides superior bit visibility.
  • Spindle lock button allows for single-wrench bit changes.
  • Innovative rubber-coated knobs have plunge-lock and on/off built-in for maximum user control.
Check Stock

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

WEN RT6033 15-Amp Variable Speed Plunge Woodworking Router Kit with Carrying Case & Edge Guide

  • Powerful 15-amp variable speed soft start motor provides speeds from 8, 000 to 23, 000 RPM.
  • Plunging base locks in downward position for functionality as both a plunge and a fixed Router.
  • Accepts both 1/4 and 1/2-inch Router bits with a plunge depth of up to 2-3/8 inches.
  • 7-Stop turret combined with both macro and micro-adjustment dials maximize precision.
Check Stock

PEALIFE Tongue and Groove Router Bit Tool Set 1/4'' Shank+45° Lock Miter Bit 1/4'' Shank – 3 PCS, Solid Steel, Anti Kickback Design, Wood Milling Cutter for CNC, Tables, Doors, Shelves, DIY Woodwork

  • 【Powerful Motor & Variable Speed】Durable AC motor with a max horsepower of 1.6 HP delivers abundant power for a variety of routing and trimming applications.
  • The variable speed control dial (16000-30000 RPM) allows users to choose a more appropriate speed for different materials..
  • 【Precise Operation】7-stop turret combined with both macro and micro-adjustment ensures precise operation for a range of cabinetry and woodworking applications. Accepts 1/4 inch router bits with a plunge depth of up to 2” inches..
  • 【Both a Plunge and a Fixed Router】Plunging base locks in downward position for functionality as both a plunge and a fixed router.【Durable Housing & Clean Jobsite】The aluminum body and base design is built for long term durability.
  • while the hood removes dust to leave a clean work space..
  • 【Ergonomic Design】Rubber covered handle for a comfortable grip.
  • an External brush cap, making it quick and easy to replace the carbon brush.
  • The quick locking system for convenient depth adjustments and base change..
  • 【What’s Included】1 * multi-function straight-edge fence, 1 * template guide, 1 * roller circle-cutting centering pin, 1 * 1-1/2-inch dust collection duct. 【Warranty】30 day refund and one year replacement..
Check Stock

Andis Blade Care Plus Jar

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool’s cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4″ collet..
Check Stock

Bosch Parts 2610915125 Insert Ring Set

  • Robust variable-speed palm Router construction – Made to provide precision and power with a 1.25 horsepower (max.) Motor, advanced electronics, high-performance bases & Proven ergonomics.
  • Powerful 1.25 HP (max), 7.0 amp motor – delivers abundant power for routing and trimming applications.
  • Ground-breaking fixed-base depth-adjustment system – ensures precise depth adjustment.
  • Rugged fixed base 360° (non-split) aluminum base housing with wide-bit capacity — Accepts bits up to 1-5/16 in. Wide.
  • Smooth-action plunge base – provides a spring-lock plunge control lever for easy plunge action.
Check Stock

3/8 x 3/8 2FL HIGH SPEED STEEL, BALL NOSE, DOUBLE END MILL

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 5.2Deg, H-Si coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

JASPER Model 200 Circle Cutting Guide for Plunge Routers

  • : The Jasper 200 Max router jig guide allows you to cut 256 different-sized, precise, perfect circles from 2 ¼” to 18 3/16” D.
  • : The 200 Max circle cutter router jig is made from high-quality acrylic materials and guaranteed to last..
  • : The circle cutting router guide includes calibration disc for precise centering and pivot pins as well as router mounting hardware to ensure perfect circle cutting paths..
  • : Includes all hardware and mounts quickly to fit over 47 different models of plunge routers from popular brands like PORTER CABLE, BOSCH, DEWALT, MAKITA, RIGID, and many more..
  • : THE JASPER 200 MAX is WOOD MAGAZINES Grade A, Top Tool Circle Routing-Jig. The router circle cutter jig guide is a must have for Speaker Makers, Woodworkers, and DIYers of every kind..
Check Stock

Amana Tool - 46202-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia

  • SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action....
  • FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits..
  • CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate,....
  • SOLID CARBIDE – Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a....
  • INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in....
Check Stock

BOSCH 8-Piece Router Template Guide Set RA1128

  • CONVENIENT: Quick-change template guide adapter for fast toolless change.
  • FUNCTIONAL: The Bosch RA1128 Router Guide Features a Versatile Array of Six Popular Router Template Guides Including Large and Small Dovetail Router Guides and Two Radius Hinge Guides.
  • USE WITH: Works with Bosch routers and plunge bases for Bosch palm routers.
  • VERSATILITY: The RA1100 interface piece allows the template guide adapter to accept common threaded template guides and reducer inserts that fit into a 1 to 3 8 Inches counter bore.
  • ORGANIZE: Template guides come in a rugged, portable carrying case for worksite organization.
Check Stock

SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 2*carbide end mills ( 1 pc v-groove end mill, 1pcs tapered end mill ), 2*Spiral router bit (1 pc up cut, 1 pc down cut).
  • The Carbide End Mill Suit for CNC Router, xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

Triton TRA001 3-1/4 HP Dual Mode Precision Plunge Router

  • Single button switches from conventional plunge to fixed-base router with rack and pinion mode.
  • Through base, single wrench bit change is achieved with automatic spindle lock.
  • Micro winder enables continuous fine depth adjustment through the full plunge mode.
  • Soft start and variable speed provides the perfect speed for all cutter types.
  • Side air vents reduces intake of dust into the motor casings.
Check Stock