Top Pneumatic Cylinder Cover

New Foam Pad Replacement for Herman Miller Classic Aeron Chair Posturefit Lumbar Graphite/Black.

  • Listing is for a brand new never used CLASS 4 WITH 400N, office chair seat height adjustment pneumatic gas lift cylinder. 6.0" stroke (seat travel....
  • Exceeds ANSI/BIFMA5.1-2011 standards, based on the specs of this cylinder, it's load capacity is 350 pounds..
  • Cylinder Diameter: 28mm (1.1") Column Diameter: 50mm (approx 2")..
  • Cylinder for Size A, B and C Aeron Chair. offer 5 years replacement warranty..
  • Only Available for Aeron chair made between 1996-2012..
Check Stock

Gas Cylinder Heavy Duty for Herman Miller Classic Aeron Chair as Replacement

  • Listing is for a brand new never used CLASS 4, office chair seat height adjustment pneumatic gas lift cylinder. 4.5" stroke (seat travel from lowest....
  • Exceeds ANSI/BIFMA5.1-2011 standards, based on the specs of this cylinder, it's load capacity is 350 pounds..
  • Length Compressed: 11.5" Fully Extended: 16" Travel: 4.5", Cylinder Diameter: 28mm (1.1") Column Diameter: 50mm (approx 2").
  • After install, If the chair can't lift normally. Two screws located near where the cable attaches need to be adjusted, see photo 2..
  • Cylinder for Aeron Chair Size A, B and C, offer 5 years replacement warranty.Only For Aeron chair made between 1996-2012..
Check Stock

CGELE Pneumatic Air Cylinder SC 32 x 200mm PT 1/8, Bore: 1 1/4 inch（32mm）,Stroke:8 inch(200mm) Screwed Piston Rod Dual Action

  • ♥Material:Made of high precision aluminum alloy..
  • ♥Each package includes 1 pcs pneumatic air cylinder(SC32×200)，1 pcs Y-joint ,2 pcs PC4-01,pneumatic tubing 5 meter(4×2.5),1 pcs teflon tape..
  • ♥Product parameters:Port size: PT 1/8,piston rod size:M10X1.25,Bore: 1 1/4 inch(32mm), Stroke: 8 inch(200mm)..
  • ♥Feature:New aluminum alloy material, thickened cylinder, surface electroplating treatment, high strength, not deformed, not easy to corrosion, with fine double seal ring, good sealing, long time smooth not jamming not leak, wear-resistant dust..
  • ♥Widly application:Widely used in printing , semiconductor, automation control, robotics, etc..
Check Stock

MYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair

  • Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
  • 5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
  • Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
  • Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
  • Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.
Check Stock

Mophorn Swivel Chair Base 28 Inch, Office Chair Replacement Base 320 Pounds, Office Chair Base 5 Inch Stroke Length, Replacement Chair Base with Bottom Plate Base Cylinder and 5 Casters

  • 【PREMIUM QUALITY】- The black office chair base contains thickened metal construction. 28 inch, 320lbs.
  • It is wear-resistant, anti-scratch, and anti-rust. 360-degree swivel action for easy transfer..
  • 【HEAVY-DUTY SEAT PLATE】- The seat plate has a fixed mounting hole, mounting hole distance: 10"/253. mounting hole distance wide: 6"/152 mm. It rated for up 320 pounds. The extended service life offered. The practical chair gas lift piston is ideal for various office chairs..
  • 【PNEUMATIC GAS CYLINDER】- The solid pneumatic gas cylinder provides a good load capacity of 320 lbs. It has a 5" travel from lowest to highest. The adjustable height of the cylinder: 4 inches (100 mm)..
  • 【ROLLING CASTER BASE】- The diameter of 5 casters is 60 mm. Each caster rated for up 110 lbs. The friction is small with noiseless function. The anti-skid caster is convenient to move. The damage to the floor reduced..
  • 【EASY TO ASSEMBLE】- It is extremely simple and convenient to install and operate. Complete accessories all parts you need under the seat are equipped..
Check Stock

Dowinx Office Replacement Cylinder,Gas Lift Cylinder Universal Size Fits Most Chair,Class 4 Hydraulic Pneumatic Piston Heavy Duty 450Lbs

  • [INDUSTRY STANDARD SIZE] Fits Most Chairs: The office chair replacement cylinder is an international standard size, suitable for most chairs, such as office chairs, gaming chairs, executive chairs, etc. Save even more money by repairing lift function by replacing gas cyliners..
  • [Premium Quality] Our heavy duty pneumatic piston is the industry's highest grade class 4. And it passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail. This replacement cylinder can be used longer..
  • [Safe and Explosion-Proof] Our hydraulic cylinder built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than most gas lift cylinder and also have the explosion-proof..
  • [Size Information] Outer Cylinder : 2 inches.
  • The height of fully expanded: 16.9 inches.
  • The adjustable height: 5.5 inches. Please confirm the measurement before ordering..
  • [One Year Free Warranty] We will provide instruction service for removing and installing cylinder replacement. And we also provide 1 year free warranty service: when the cylinder fails, leaks, sinks, we will reissue a new cylinder for free..
Check Stock

Adjustable Hydraulic Gas Lift Cylinder,Heavy Duty,Universal Size Replacement for Most Stool Chairs,Smooth and Noiseless

  • 8" STROKE ADJUSTABLE: Minimum length: 14.37 inches (36.5cm).
  • Maximum length : 22.24inches (56.5cm). You can adjust the fit height to a comfortable....
  • HEAVY DUTY :Gas lift cylinder that holds great weights - tall center support column of the chair. Holds up to 450 lbs on most office, executive and....
  • CYLINDER DIAMETER: Universal model，Outer cylinder: 2 inches (5.0cm), Inner cylinder: 1 inche (2.8cm)..
  • SMOOTH and NOISELESS: Pneumatic shock makes it easy to rotate 360 degrees smoothly and silently，Can be installed easily .(You can reference....
  • GUARANTEE : Certified by SGS Test，5-Year quality warranty, we are dedicated to providing 100% customer satisfaction..
Check Stock

VEVOR Pneumatic Strapping Tool A19 Hand Held Strapping Machine 1/2 to 3/4 Sealless Strapping Machine Handeld Strapping Machine for PP PET Strapping

  • 【4000N TIGHTENING FORCE】 - This A19 handheld pneumatic strapping tool is driven by air cylinder, offering a large strain force: 4000N. Suitable....
  • 【EXCELLENT STRUCTURE】 - The main body of the automatic strapping tool is made of high strength alloy aluminum and steel, great resistance to heat....
  • 【CONVENIENT OPERATION】 - This pneumatic strapping machine has three functions: sealing, tension, and cutting. With friction and hot welding....
  • 【NON-FATIGUE DESIGN】 - Two ergonomic handles, non-slip and solid. This design with small size and lightweight features makes this pneumatic steel....
  • 【VARIOUS APPLICATION】 - This pneumatic steel banding tool is suitable for packaging large-size products, widely used in small and medium-sized....
Check Stock

TAILONZ PNEUMATIC 25mm Bore 50mm Stroke Pneumatic Small Thin Cylinder Aluminum Pneumatic Air Cylinder SDA25-50

  • 【Model】Pneumatic Small Thin Cylinder.
  • 【Working Pressure:】0-1.0mpa | 0-145psi..
  • 【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • 【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..
Check Stock

TAILONZ PNEUMATIC 32mm Bore 25mm Stroke Pneumatic Small Thin Cylinder Aluminum Pneumatic Air Cylinder SDA32-25

  • 【Model】Pneumatic Small Thin Cylinder.
  • 【Working Pressure:】0-1.0mpa | 0-145psi..
  • 【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • 【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..
Check Stock

Pneumatic Clamps Pneumatic Clamp 300mm GH-12130 Professional Cylinder Pneumatic Hold Down Clamp

  • ...ference mechanics and dynamics design and the overall structure is ergonomic that the thin, compact fixture is suitable for narrow working spaces. With a total length of 300mm and a maximum clamping force of 230 kg,the Clamp helps to ensure the machining accuracy of the workpiece..
  • 【operate easily】 This Cylinder Pneumatic Clamp provides a smoother operation during repeated clamping operations than manual clamps. The intake port size is M10.The maximum working pressure is 9Kgf / cm2 (0.9mpa) 100PSI, and the movable distance of the clamping rod is 60mm / 2.3in, The Pneumatic Clamping Tool operate easily, and it is easy to realize automatic control..
  • 【Improve efficiency】This Pneumatic Hold Down Clamp is used for positioning, clamping workpiece station. It is powered by compressed air and has the characteristics of labor saving, energy saving and environmental protection. It can shorten test time,and improve production efficiency which reduce labor intensity of workers.Pneumatic clamp is easy to operate and easy to implement automatic control..
  • 【Application】 This Pneumatic Lever Clamp is used for mass production, and the workpiece station that needs to be positioned and clamped can be used. It is commonly used in stations such as welding, gages,....
Check Stock

Lumbar Support Pad Replacement for Herman Miller Classic Aeron Chair Office Chair - Graphite/Black - Size B

  • Bundle - With these office chair replacement parts, you'll get everything you need to breathe life into your old chair - step-by-step instructions,....
  • No Sinking - You need a chair that supports you while you're at work, or at home. Our replacement chair cylinder is built to last a lifetime, without....
  • Universal Gas Lift - Our gas lift fits just about any office chair, and is compatible with most popular office chair brands! No need to sweat a lift....
  • Class 4 Cylinder - Our heavy duty pneumatic piston replacement cylinder is a class 4, OEM-standard hydraulic device that won't let you down....
  • Money Saver - Don't sink your money into a whole new chair that, well, sinks. This gas lift cylinder is a cost-effective alternative to making sure....
Check Stock