Top Pneumatic Oil Pump

JoyFans 10L Pneumatic Transmission Fluid Pump Extractor and Dispenser, Gearbox Oil Transfer System Refill Fill Evacuator Tool Kit with 15PCS ATF Adapters for Most Garage Shop Vehicles

  • ...l, power steering fluid, engine oil, gearbox oil, lubricating oil, brake fluid, coolant, etc. If it's used for ATF oil, 15 optional ATF adapters are well kept in a blow-molded case at your fingertips. All parts in this fluid evacuator and dispenser tool set are designed to transfer fluids fast and safely..
  • Handsfree Pneumatic Helper: This transmission fluid pump will keep you away from boring laborious manual work with air compressors. Two-way extractor & dispenser tool saves energy and time.
  • Don't even need to pour oil manually! You only need to switch the extract or dispense mode and buckle the self-locking device. Large capacity avoids the trouble of repeated refueling and satisfys refueling needs of multiple vehicles at once. Quick and sparkless..
  • 3PCS 1M Hoses: O.D. 6mm 8mm 10mm. Connect both ends of the 80'' hose with quick coupling to pump and the selected nylon hose first. They make the pump more suitable for various makes and models. The blue knob must be consistent with the air control switch valve: Extract or Dispense. The 1M nylon hose can be inserted into the car oil container or dipstick hole directly to extract waste oil for recycle and dispense the new oil for refilling. No need to jack up the vehicle and crawl under it.
Check Stock

FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills

  • 【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock

Aocoom-QingCang 6.5 Liter Oil Changer Vacuum Transmission Fluid Extractor Pneumatic/Manual Fluid Evacuator with Pump Tank Remover and Brake Bleeding Hose Engine Oil Change & Fluid Change Tool

  • 【2 USAGES】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 1*3.5 ft flexible hose and 3 * 3.39ft extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【EASY to USE】With oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil at any time. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 3:1 Fast Flow Rate 7.4gpm / 28lpm for SAE130 Oils/Fluids

  • PUMP SPECS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 7.4GPM / 28LPM.
  • A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
  • An Air Motor Effective Dia. of 63mm 2.5" inch.
  • An Air Consumption (per minute) at 8BAR / 140L at 115PSI / 5.0CFM.
  • Air Inlet Connection of 1/4" inch and Oil Outlet Connection of 3/4" inch Male.
  • A Long Pump Life of 840k Liters / 221k+ Gallons.
  • EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
  • This Smart design uses fewer parts for less pump wear and tear, making it is easy to use and maintain.
  • This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE130 grade oil.
  • PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper add....
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids

  • SPECIFICATIONS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 8.5GPM / 32LPM.
  • A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
  • A Max Fluid Pressure of 8BAR / 115PSI. An Air Motor Effective Diameter of 63mm 2.5" inch.
  • An Air Consumption (per minute) @ 8BAR / 130L @ 115PSI / 4.7CFM.
  • An Air Inlet Connection of 1/4" and Oil Outlet Connection of 3/4" Male.
  • A Long Pump Life of 960k Liters / 253k+ Gallons.
  • EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
  • This Smart design uses fewer parts for less pump wear/tear, making it is easy to use/maintain This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE80 grade oil.
  • PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall-mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equi....
Check Stock

DYI Sheng TDS 1/2 inch Stainless Steel SUS 316 Air-Operated Double Diaphragm Pump Teflon Diaphragm Pneumatic Transfer Pump for Chemical and Industrial Use

  • [SAFETY and EXPLOSION-PROOF] The operating pressure is between 1~8.3 bar, driven by air pressure. A Pneumatic Double Membrane Pump can dry-run for extended periods of time without getting overheated. Blocked suction or discharge pipework, the pump will stop due to air pressure balance, and the pipeline pressure will not continue to rise, not causing the danger of pipeline rupture and liquid leakage..
  • [AODD PUMP CAN HANDLE A WIDE RANGE OF PH LEVELS] The pneumatic diaphragm pump design isolates the conveyed fluid from the pumping chamber. Diaphragm Pump is ideal for pumping highly corrosive and hazardous chemical fluids and volatile. Normal operation will not cause harm to the environment and operators..
  • [Wide Applications] The diaphragm pump is suitable for almost of fluids. Pumps can be widely used in the automation industry, water treatment, mining, petroleum, oil and gas, coating, printing, electroplating, chemical industry, electronics, construction, Pharmaceutical, metallurgy, and other industries..
Check Stock

NorthStar Portable Electric Air Compressor —-1.6 HP, 30-Gallon Vertical, 5.3 CFM

  • Heavy-duty 1.6 HP, 15 Amp induction motor for maximum performance and efficiency.
  • Durable cast iron V-twin pump provides good heat dissipation and no transfer of heat between cylinders.
  • Belt drive oil-lubricated pump runs quietly and delivers long pump life.
  • 30-gallon vertical tank is ASME certified.
  • 10in. pneumatic wheels for easy portability.
Check Stock

Metabo HPT Air Compressor, Wheeled, 8-Gallon, Gas Powered, Honda GX Engine (EC2510E)

  • Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT.
  • Solid cast iron cylinder provides industry recognized premium material for long life, consistent compression and low oil carryover.
  • Powered by a professional grade Honda GX engine.
  • Baseplate integrated control panel protects the gauge, regulator and plumbing while centralizing the controls for simple operation.
  • Oversized oil level site glass allows everyone to monitor the oil level for the pump avoiding pump damage due to lock up from inadequate oil supply.
  • Pneumatic throttle control, that uses air instead of a cable to adjust the throttle, eliminates the common failure of cable throttles due to crimping and breaking.
Check Stock

Chicago Pneumatic RCP-561VNS 5 HP 60 Gallon Two Stage Reciprocating Air Compressor

  • ULTRA-LIGHT WEIGHT & PORTABLE: At only 22 lbs. the Chicago Pneumatic Easy Air can be easily moved all around your work shop, home garage or construction site..
  • NO MAINTANENCE: The Easy air utilizes a powerful, maintenance free, oil-less pump. No risk of leaking oil..
  • PERFORMANCE AND VERSATILITY: The Easy Air produces 2 CFM @ 90 PSI with a MAX capacity of 115 PSI..
  • BUILT FOR EVERYONE: The Easy Air was designed with a large regulator knob and easy to use connection coupler..
  • POWERFUL AND RELIABLE: With the Chicago Pneumatic name and durable ultra-light weight design the Easy Air is perfect for every home and garage..
Check Stock

EONLION Oil Change Vacuum Fluid Extractor 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Oil Transmission Coolant Change Tool Easy-to-Use Hand Pump Extract Fluid Through Dipstick Tubes

  • 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at....
  • 【 2 Options Usage 】 Fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the pump into a....
  • 【No Oil LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be....
  • 【 Plus Version 】 Upgraded accessories, upgraded convenience. This fluid extractor comes with storage unit for collecting hoses when not in use,....
  • 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! Perfectly extracts most fluid types: engine oil, transmission fluid, gear....
Check Stock

Chicago Pneumatic HCP-1116-1.5 HP 120 Volt Electric 1.6 Gallon Horizontal Air Compressor Max 115 PSI

  • ULTRA-LIGHT WEIGHT & PORTABLE: At only 22 lbs. the Chicago Pneumatic Easy Air can be easily moved all around your work shop, home garage or construction site..
  • NO MAINTANENCE: The Easy air utilizes a powerful, maintenance free, oil-less pump. No risk of leaking oil..
  • PERFORMANCE AND VERSATILITY: The Easy Air produces 2 CFM @ 90 PSI with a MAX capacity of 115 PSI..
  • BUILT FOR EVERYONE: The Easy Air was designed with a large regulator knob and easy to use connection coupler..
  • POWERFUL AND RELIABLE: With the Chicago Pneumatic name and durable ultra-light weight design the Easy Air is perfect for every home and garage..
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • ...in plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving.
  • Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4" American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount....
Check Stock