Top Pneumatic Plugs

Hromee 4-Way Straight Air Manifold 5 Ports Aluminum Industrial Pneumatic Air Compressor Quick Connect Socket In Line Type Air Hose Splitter with 4 Couplers and 1\\/4 Male NPT Plug

  • ...ssor and no need to disconnect your line when you want to switch tools. It also allows you to be able to connect to different types of connections without changing tools and hoses. You can also work with 4 different tools at the same time. You will get the job well done with ease in a less time..
  • EASY TO USE - The pneumatic manifold is equipped with quick connection couplers which is easy to connect and disconnect. Simply thread pneumatic fittings into the ports of the distribution block to produce an organized method of supplying multiple lines from a single source..
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

Complete Compressed air Tubing Kit Assembly Inlcudes 1/2 Tubing and 1/2 Threads M3800 Maxline Kit 1/2 Filter Regulator 3 Poly Refinforced Hoses with Quick Disconnects

  • Complete Compressed air Tubing assembly Kit.. All you need is an air compressor and your preferred pneumatic tools.
  • Kit Inlcudes ( M3800 Maxline Tubing Kit - 100FT tubing with 3 Air Outlets and maxline accessories)).
  • 1/2" Industral Rated Filter Regulator ( 7- 150PSI Adjustable) - 6' Tekton 46363 Jumper Hose - 1/2" Full Flow Brass Ball Valve for your receiver tank....
  • (6) Quick Discconnects / Couplers with (6) Plugs to match. (Industrial Type), We also include roll of pipe tape.
  • (3) Heavy Duty Poly Reinforced Coiled Hoses for each drop. 20FT total length per Coiled hose. rated 200PSI.
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

Brinly PA-403BH-A Tow Behind Plug Aerator with Universal Hitch, 40', Hammered Black

  • Aerate & Relieve Compacted Soil: 24 heat-treated, 16-gauge Steel plugging spoons penetrate compacted soil and remove up to 3-inch plugs of soil, allowing water, seed, and fertilizer to reach the roots. Brinly plug design is narrower with sharpened ends to allow easier penetration and require less weight..
  • Long-lasting construction: durable, all steel design with fully-enclosed weight tray holds up to 150 pounds of any type of extra weight for maximum soil penetration and depth. Tines are heat-treated for strength. No flat wheels for durability..
  • Easy transport: for crossing drives, walks and rooted areas, Brinly plug Aerator includes a single transport lever to engage transport mode using the 10″ semi-pneumatic rubber tread tires..
  • Works safely on turns & uneven terrain: three independently rotating, welded tine sections minimize turf damage during turns and help provide consistent penetration on uneven ground..
  • Universal Hitch: a single pin, universal Hitch easily attaches to every lawn tractor and most ztrs and ATVs..
Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

  • ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
  • General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
  • Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
  • Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
  • Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
  • Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
  • It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check Stock

mistcooling Double Fan Portable Misting System (Mid Pressure w/ 160 Psi Pump 6 Nozzles)

  • Completely portable on rolling cart - Totally customizable to fit your needs - Creates large volume of ultrafine mist - Two High velocity 24'' oscillating fans - Unit is UL rated for outdoor use - 15 Gallon water tank - Up to 4-6 hours of run time (6 nozzles) - Ultrafine Brass/Stainless Steel Mist Nozzles - 160 Or 1500 PSI HP mist pump in steel enclosure - Stainless Steel Mist Rings on HP System.
  • - Lightweight yet durable aluminum frame cart - Corrosion Resistant - Large pneumatic wheels and comfort grip handles on the cart - Easy to haul in Grass, Sand, Gravel or Dirt - Locking front caster and rear level support - Fans and pump can be controlled individually - Includes nozzle plugs to control mist level - Can be powered by portable generator..
  • PUMP: Voltage: 110v AC, 60 hz - Amps: 7 amps (160PSI), 10 amps (1500PSI) -Fan Size: Two 24'' Oscillating - 3 Speed - Air Throw: Up to 40 Feet - UL507 rated for outdoor use.
  • Stainless Steel Ring Made with Industrial Grade 3/8'' Rigid Stainless Steel 316 Compatible with all High and Mid Pressure Mist Pumps Pre-threaded nozzle slots for 10/24 Thread Rated for up to 2000PSI Attaches to any wall mount, floor or pedestal fan Includes Push Lock Inlet Fitting.
Check Stock

Acuteye 33FT/10Meters Pneumatic Air Tubing, 10mm OD x 6.5mm ID PU Polyurethane Air Compressor Tube Hose Pipe For Air Compressor Fitting or Fluid Transfer (Black)

  • Pneumatic Tubing Pipe Size: 3/8" (Outer diameter) X 1/4" (Inner diameter). Product Total Length:33 Feet (10meters).
  • Pneumatic Tubing Material: PU ( Poly Urethane ),has high elasticity to restore memory effect. Flexible.
  • Burst Pressure: 2.5Mpa(363Psi).Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Application: air, water, chemicals, lubricants, instrument lines, irrigation control systems, textile mills, food plants, vehicles and ships fuel delivery pipe, vacuum systems, air conditioning systems, cars, And hydraulic brake system, oscillation insulator and other industries. Pneumatic pneumatic tools.
  • Application Range: Pneumatic pneumatic tools.
Check Stock

Simlug Mini Air Pneumatic Cylinder, Cdj2B10-30B 10Mm Diameter 30Mm Stroke DoubleActing Stainless Steel Pneumatic Air Cylinder

  • The pneumatic actuator, The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion..
  • The pneumatic air cylinder, Made of high quality stainless steel, the pneumatic cylinder has long service life..
  • This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • It has 10mm cylinder diameter and 30mm stroke, the pressure is 0.15Mpa~1Mpa..
  • Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage..
Check Stock

Metabo HPT 18V MultiVolt™ Cordless Angled Finish Nailer Kit | Accepts Nails 1-1/4-Inch up to 2-1/2-Inch | 15 Gauge | Lifetime Tool Warranty | NT1865DMAS

  • CORDLESS NAILER: 15 Gauge Cordless Nailer.
  • INCLUDES: NT1865DMAS, (1) Compact 3.0Ah Lithium Ion Battery, Charger, Contractor Bag, Safety Glasses.
  • FASTENERS: 15 gauge angled finish nails from 1-1/4-in - 2-1/2-in.
  • POWER: 1,100 Nails per charge using Metabo HPT's compact 3.0 Ah Li-ion battery.
  • APPLICATIONS: Ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite without the need for a tank or hose.
  • DEPTH ADJUSTMENT: Get a professional finish with varying materials with the tool-less depth of drive adjustment.
  • PNEUMATIC-LIKE FEEL: The unique air spring drive system delivers similar performance as a pneumatic nailer.
  • BRUSHLESS MOTOR TECHNOLOGY: Experience longer run time per charge, less maintenance and increased durability.
Check Stock

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

  • Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
  • Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
  • Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
  • Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
  • left-turn-L and right-turn-R are optional..
  • Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Check Stock

Pneumatic clamp, G18 pneumatic sealing clamp Easy to use Wide application for machining

  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
Check Stock