Top Pneumatic Punch

Action Village 20oz CO2 Tank

  • POWERFUL AIR-RIFLE AIR TANK: The Wingman PCP tank features a carbon-fiber filament wound over an aluminum bladder. It weighs much less than a steel....
  • LARGE HIGH-PRESSURE AIR TANK: Our PCP tank packs a lot of punch for its size. It is available in 74 cu. ft. and 98 cu. ft. Either tank can be used....
  • EASY FILLING: This tank makes it simple to fill any PCP gun. It features a rubberized hand wheel for precise air-tank control and has a DIN 300-bar....
  • WHAT'S INCLUDED: Our precharged pneumatic air-rifle and pellet-gun tank has a 24-inch microbore hose with 1/8-inch BSPP and male and female threaded....
  • OTHER AIR TANK FEATURES: Our PCP air-rifle tank comes with a test plug to check the remaining pressure and has an inline gauge that shows the pressure....
Check Stock

Ingersoll Rand 121Q Super Duty Air Hammer 121-K6 - Tool plus 6 Piece Chisel Set

  • 6 PIECE TOOL KIT: The IR 121-K6 kit comes with the 121/Q pneumatic hammer and 6 assorted high quality steel chisels that have been tested to meet the....
  • HEAVY DUTY AIR HAMMER: The air hammer comes with a coil-spring retainer for quick and easy chisel changes, professional touch trigger for total....
  • CHISEL ATTACHMENTS INCLUDED: Assorted chisels include (1) 3/4" flat blade chisel, (1) punch chisel, (1) claw ripper-edging tool, (1) single blade....
  • APPLICATIONS: Whether chipping, punching, or cutting, the tools provided in this kit—which also includes a sturdy black blow-molded storage case....
  • PROVEN RELIABILITY: Every component, mechanism, and function has undergone rigorous testing to ensure long-lasting performance.
Check Stock

KickBlock - World’s Best Bass Drum Anchor System (Brick Red)

  • Frequency response shaped specifically for kick drums and bass instruments.
  • Built-in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum.
  • Studio quality performance, even a high sound pressure levels.
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise.
  • Hardened steel mesh grille that resists wear and abuse.
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration.
  • Neodymium magnet for high signal–to–noise ratio output.
  • Low sensitivity to varying load impedance.
  • Drum microphone provides low-frequency bass punch and SPL handling. It includes dynamic locking stand adapter for easy set-up, steel mesh grille for durability, shock mount for sound isolation, and neodymium magnet for high signal-to-noise ratio..
Check Stock

The Drum Recording Handbook (Technical Reference)

  • The industry standard for snare drum, and a reliable and high-performing choice for toms, Shure's cardioid dynamic SM57 microphone features a contoured frequency response that cuts through the mix with exceptional impact, while reproducing sound accurately..
  • Perfect for the kick drum, the supercardioid Beta 52A derives its low-end punch and sonic presence from a carefully tailored frequency response. Equipped with its own pneumatic shock mount, the Beta 52A is designed with an integral locking stand mount for quick-and-easy set up..
  • Shure's A56D universal drum mounting system can be used to position microphones virtually anywhere - on drum rims, microphone stands, even cymbal stands. Designed with captive parts to prevent the loss of individual pieces, the A56D is small, secure, and can be used with any standard microphone, making it a great tool for both stage and studio environments..
  • Top quality microphones and an affordable price makes the Drum Mic Kit an exceptional value for the performing drummer..
  • Suggested Applications: Kick Drum, Snare Drums , Rack/Floor Toms.
Check Stock

Air Venturi Wingman PCP Refill Tank Carbon Fiber Tank PCP Air Tank Wingman 98

  • POWERFUL AIR-RIFLE AIR TANK: The Wingman PCP tank features a carbon-fiber filament wound over an aluminum bladder. It weighs much less than a steel....
  • LARGE HIGH-PRESSURE AIR TANK: Our PCP tank packs a lot of punch for its size. It is available in 74 cu. ft. and 98 cu. ft. Either tank can be used....
  • EASY FILLING: This tank makes it simple to fill any PCP gun. It features a rubberized hand wheel for precise air-tank control and has a DIN 300-bar....
  • WHAT'S INCLUDED: Our precharged pneumatic air-rifle and pellet-gun tank has a 24-inch microbore hose with 1/8-inch BSPP and male and female threaded....
  • OTHER AIR TANK FEATURES: Our PCP air-rifle tank comes with a test plug to check the remaining pressure and has an inline gauge that shows the pressure....
Check Stock

Metabo HPT 18V Cordless Angled Finish Nailer | Tool Only - No Battery | Brushless Motor | 15 Gauge, 1-1/4'Up To 2-1/2' Finish Nails | Lifetime Tool Warranty | NT1865DMASQ7

  • CORDLESS FREEDOM: Pneumatic power with 18 volt cordless freedom.
  • FASTENERS: 15 gauge angled finish nails from 1-1/4-in – 2-1/2-in.
  • POWER: 1,100 Nails per charge using Metabo HPT’s compact 3.0 Ah Li-ion battery.
  • APPLICATIONS: Ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite without the need for a tank or hose.
  • DEPTH ADJUSTMENT: Get a professional finish with varying materials with the tool-less depth of drive adjustment.
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

Ingersoll Rand 9500 Chisel Bit Kit for 114GQC Edge Series Air Hammer, 5 Piece Set Includes Tapered Punch, Flat Chisel, Panel Cutter, Sheet Metal Cutter, Spot Weld Breaker

  • PREMIUM SET: This pneumatic hammer chisel kit includes a set of 5 chisels made of high quality steel to provide the best in quality, strength, and durability.
  • CHISELS INCLUDED: This 5-piece set includes the following chisels: tapered punch, flat chisel, panel cutter, sheet metal cutter, and spot weld breaker.
  • USE WITH: Pair these chisels with your Ingersoll Rand 114GQC Edge Series Air Hammer.
  • RELIABILITY: Built to handle harsh environments, these chisels have undergone rigorous testing to ensure long-lasting performance.
  • INGERSOLL RAND DIFFERENCE: For more than 100 years, Ingersoll Rand’s advanced engineering, manufacturing, and service models have set a standard of excellence.
  • Trust Ingersoll Rand to help you complete your work faster and easier than ever before.
Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

  • ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
  • General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
  • Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
  • Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
  • Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
  • Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
  • It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check Stock

Mayhew 62254 Pro Pilot Punch Kit, 12-Piece

  • Pilot punches, an original Mayhew patented design, also called a roll pin punch, are a punch that fits tightly within a roll pin.
  • Drives and removes roll pins and other hollow tension pins.
  • Black oxide finish for additional rust protection.
  • 12-Piece Set includes: 1/16 x 2-3/4" Pilot Punch, 5/64 x 3/14" Pilot Punch, 3/32 x 3-1/2" Pilot Punch, 1/8 x 4" Pilot Punch, 5/32 x 4-1/2" Pilot Punch, 3/16 x 4-1/2" Pilot Punch, 7/32 x 5" Pilot Punch, 1/4 x 5-1/2" Pilot Punch, 5/16 x 6" Pilot Punch, 3/8 x 6" Pilot Punch, 7/16 x 6" Pilot Punch, 1/2 x 6" Pilot Punch.
Check Stock

Acuteye 33FT/10Meters Pneumatic Air Tubing, 10mm OD x 6.5mm ID PU Polyurethane Air Compressor Tube Hose Pipe For Air Compressor Fitting or Fluid Transfer (Black)

  • Pneumatic Tubing Pipe Size: 3/8" (Outer diameter) X 1/4" (Inner diameter). Product Total Length:33 Feet (10meters).
  • Pneumatic Tubing Material: PU ( Poly Urethane ),has high elasticity to restore memory effect. Flexible.
  • Burst Pressure: 2.5Mpa(363Psi).Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Application: air, water, chemicals, lubricants, instrument lines, irrigation control systems, textile mills, food plants, vehicles and ships fuel delivery pipe, vacuum systems, air conditioning systems, cars, And hydraulic brake system, oscillation insulator and other industries. Pneumatic pneumatic tools.
  • Application Range: Pneumatic pneumatic tools.
Check Stock