Top Poe Cable

POE Extender RJ45 4-Port 10/100M IEEE802.3at Power-in to IEEE802.3af Power-Out for Ethernet/PoE Power AP IP Camera IP Telephone and Other Network equipments

  • A PoE-powered PoE-sourcing ethernet switch. Used for network equipment with PoE signal function, as relay equipment to achieve signal extension. Total....
  • Applicable Range: A Used with AP, IP camera, IP telephone and the other network equipments in the situation of the lack of power line or far away from....
  • Network Medium: Cat5 or better UTP cables(less than 120m).
  • PoE input-1 RJ45 port, PoE output: 4 RJ45 port.
  • PoE Standard: IEEE 802.3at (power-in),IEEE 802.3af(power-out).
  • PoE Port Power: input power-25.5Watts,output power-24Watts.
  • NOTE: 1. Using high quality transmission cable can transmit up to 100~120m. With poor cable, transmission may not able to reach 80meters. 2.If the....
Check Stock

Riiai 2in1 Network Cable Tester & Digital Multimeter, Multifunction Ethernet Wire Tracer with PoE & NCV & Lamp for CAT5 CAT6, Telephone Line Probe Toner Locator Finder Voltage Continuity Test Tool

  • -【Multi-Function Wire Detector】: 3 digital scan modes, both analog and PoE modes for easy cable tracking. Equipped with the most powerful cable location technologies for all work environments. Also included cable length measuring, continuity testing, voltage testing, cable faults testing, PoE testing, hub blink and NCV function, making it a must-have tool for cable engineers..
  • -【Audio Toner for Cable Collation】: Fast and efficient positioning. Real-time measurement of network cable length（up to 500M/1640ft), and built in short circuit protection. Quickly and easily identify the desired cable in large bundles. This unit is widely used in telephone systems, computer networks, BNC cables and other network cables. Perfect for security monitoring, communication wires, integrated wiring and other weak current systems..
  • -【PoE Testing & Port Flashing】: The POE testing feature can check cable mapping polarity, voltage of POE network switches, withstand 60VDC, and locate network ports by the flashing the network light (blinks every 2 second) on hubs and switches. Automatically detects and switches between 10M/100M/1000M modes..
Check Stock

PoE Texas 24 Multi Port PoE+ Injector with 48v 240w Power Supplies - 10/100/1000 Gigabit Passive Power Over Ethernet Means Versatility - 30W PoE Injector for WiFi Access Point PTZ Camera IP Phone

  • Save big on network upgrades and installations using this 24 port gigabit midspan PoE injector. Use it to power up to 24 IP cameras, desktop phones, WiFi Access Points, or other low voltage devices through a network data cable..
  • Instantly upgrade your network gigabit switch to PoE/PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
  • With this passive PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch. Passive PoE power is ‘Always On’ with power delivery on Mode B pins (-4,5 +7,8)..
  • Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port..
  • All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

Elite Cat6 Shielded Riser (CMR), Ethernet Cable 1000ft, 23AWG 100% Solid Pure Bare Copper, Foiled w/Unshielded Twisted Pair (F/UTP), 550MHz, UL Certified, UL-LP Cert, Bulk Networking Cable Reel - Blue

  • Cat6 Shielded Riser (CMR) bulk cable in 1000ft, 4 Unshielded Twisted Pairs with an overall foil shield around all 4 pairs, 23AWG, Solid Bare Copper Conductors for optimal signal strength. Top rated performance with 3-5 dB extra margin over EIA/ TIA-568.2-D standards. Fluke Tested. Suitable for PoE, PoE+, PoE++. The only Cat6 shielded riser cable with UL-LP Certification for safety compliance at PoE operation during increased power and heat generation..
  • Perfect for installs in your home and business, risers, in walls, between flooring and can be substituted for CM rated applications. Run this Cat6 shielded Riser cable up to 328 Feet (100 meters). Shielded cable is great for installs with EMI (Electromagnetic Interference). It reduces interference with its shielding around the 4 Twisted Pairs bringing you optimal performance. Easily connect this cable with shielded Cat6 connectivity such as keystone jacks, RJ45's and field termination plugs..
  • Cat6 shielded Riser cable supports 1Gb (Gigabit) Ethernet and 550MHz up to 328 Feet. Achieve up to 10Gb at shorter distances with standard IEEE 802.3bz (2.5GBase-T and 5GBase-T). Power devices such as: POE (Power Over Ethernet), computers, routers, IP Cameras, switches, keystone jacks, RJ45's, modems, Xbox, PlayStat....
Check Stock

Tripp Lite Cat6 Wall-Mount PoE+ Compliant Patch Panel 12-Port 110/Krone 568A/B RJ45 Ethernet TAA (N250-P12)

  • 12 PORT CAT6 PATCH PANEL: This patch panel enables quick, easy cable patching. Just plug Cat6 patch cables into its 12 front RJ45 ports, and use a 110 or Krone punch-down tool to terminate color-coded connections in the rear..
  • POWER OVER ETHERNET PLUS: This PoE+ patch panel maximizes performance with PoE+ applications. Power over Ethernet patch panel prevents spark-gap erosion that can affect transmission..
  • WALL MOUNTING: Durable aluminum panel with ABS plastic frame that mounts easily to wall or desk. Included cable ties and a removable cable management bracket help organize your connections..
  • WIRING STANDARDS: The N250-P12 supports EIA/TIA 568A and 568B wiring standards and is compatible with all network applications. This PoE+ patch panel is TAA-Compliant for GSA schedule purchases. Also known as: poe Ethernet patch panel / poe network panel / network patch panel / Cat6 patch panel / Cat 6 patch panel..
Check Stock

Netgear Powerline 1000 Adapter Set Of 2 2x pl10

  • 【Convert Non-PoE to PoE】With no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of TL-PoE150S.
  • 【High Speed Gigabit Ports】Experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port + 1× Gigabit Ethernet Output port.
  • 【802.3af PoE Compliant 】TL-PoE150S supplies power and data via one single ethernet cable to 802.3af PoE devices and expands network to areas with no power lines or outlets.
  • 【Plug and Play Installation】Easy setup with no software installation or configuration needed.
  • 【Long Range Transmission】Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large areas.
  • 【Auto Detect Power】With Auto Detect technology, TL-PoE150S determines and delivers the exact power supply to your devices wiith up to 15.4W power output..
Check Stock

Triplett LVPRO30SR Network Cable Tester/Verifier with 12 Tester Apps and 8 RJ45 Smart Remotes - Coax, CAT5/5e/6/6a/7, Shielded/Unshielded

  • Run a variety of cable testing procedures including Cable Map, Ethernet Switch Port Blink, Speaker Pop, Cable Length, PoE Volts, Battery Test, and 10/100/1000 indication.
  • Preloaded with a powerful cable testing pack and 13 device testing apps, plus Length Return Loss Quality (RLQ) Pack Apps, Alert LEDs to indicate POE, Tone Locator, Port Blink, Speaker Pop, Speaker 7.1 ID and Wall Jack ID.
  • Perform detailed wire map and measure cable length and distance to open or short.
  • Check line voltage on RJ45 (PoE) and telephone lines.
  • Includes 10 RJ45 remotes, 10 Coax remotes, F Male to BNC Male, F Male to BNC Female RJ45 patch cable (2), RJ45 to alligator clip adapter, USB cable, case, 9V battery, RLQ adapters and SR remotes.
Check Stock

Fluke Networks LIQ-100 LinkIQ Cable + Network Tester

  • Cable Performance testing up to 10GBASE-T via frequency-based measurements.
  • Network features including: IPv4 and v6 ping, nearest switch diagnostics (IP address, name, port / VLAN number, and advertised data rates).
  • Ethernet Alliance certified PoE Verification – Detects the PoE class (1-8) and power, and performs a load test of available PoE from the connected switch.
  • Displays cable length, wire map, and distance to open or short .
  • Manage results and print reports from LinkWare PC.
Check Stock

Cable Matters UL Listed 6-Pack RJ45 Shielded Keystone Jack with Integrated Shutter

  • ...rd wall plate or patch panel with a keystone blank outlet.
  • Robust die-cast housing provides superior shielding and mitigates alien crosstalk.
  • Cat 6a performance for a 10G BASE-T channel compliant network.
  • Supports 23 to 26 AWG solid or stranded wire.
  • Cat6A connector is backwards compatible with Cat 6 and Cat 5e bulk cable.
  • 180 degree easy termination jack supports tool free or crimp tool termination.
  • A 180 degree wide-angle, hinged design provides easy access and termination.
  • Tool free cap has universal T568-A or T568-B labels.
  • IDC modules accept a 110 impact tool for wire insertion.
  • compatible with the Cable Matters Cat6A Crimp Tool Model 180087.
  • Superior construction combines a one piece metal keystone to suppress EMI/RFI electromagnetic interference, NEXT, and AXT crosstalk.
  • Stickers on the inside prevent accidental contact with the metal housing.
  • Integrated metal collar assists with cable strain relief.
  • Snap-in retaining clip ensures a secure connection.
  • Auto-closing shutter protects the RJ45 contacts.
  • Plug in a Cat6A patch cable to open the shutter.
  • PoE plus compliantShielded RJ45 connector for IEEE 802.3at Power over Ethernet (PoE+) network applications up to 30W with a Cat 6A Ethernet cable.
  • Standards compliance includes a UL listed flammability r....
Check Stock

StarTech.com 30ft (9m) CAT6 Ethernet Cable - LSZH (Low Smoke Zero Halogen) - 10 Gigabit 650MHz 100W PoE RJ45 UTP Network Patch Cord Snagless w/Strain Relief - Black CAT 6, ETL Verified (N6LPATCH30BK)

  • HIGH PERFORMANCE LSZH CAT6 ETHERNET CABLE: 100% copper, Ethernet cable for error-free Multi Gigabit/Multi-speed 1/2.5/5Gbps connections.
  • Complies with ANSI/TIA-568-2.D Category 6 requirements.
  • LSZH CABLE WITH 100W PoE: Low Smoke Zero Halogen Ethernet patch cord with 24 AWG cable, stranded copper conductors supports various PoE devices up to 100W PoE++.
  • ETL VERIFIED PURE COPPER CABLE: This Fluke Tested & ETL Verified 30ft snagless LAN cable with 100% copper Ethernet wire delivers error-free data & safe PoE power, unlike the lower quality copper-clad aluminium versions from other brands.
  • ECO-FRIENDLY AND QUALITY CONSTRUCTION: Eco-friendly (PVC free) LSZH cable produces lower levels of smoke & toxic (acidic) fumes in case of fire.
  • PVA co-polymer jacket resists bending or fraying damage.
  • 50-micron gold-plated pins improve signal integrity.
  • SPECS: Length: 30ft (9.1m) Cat 6 Network Cable | Color: Black | 650 MHz Rated | Structure: 4 Pair U/UTP | RJ45 Connectors | Jacket: PVA, Al(OH)3 | Fire Rating: LSZH | 24 AWG Copper | Wiring: ANSI/TIA-568-B | ETL Verified | Warranty: Lifetime.
Check Stock

StarTech.com 50ft (15m) CAT6 Ethernet Cable - LSZH (Low Smoke Zero Halogen) - 10 Gigabit 650MHz 100W PoE RJ45 UTP Network Patch Cord Snagless w/Strain Relief - Gray CAT 6, ETL Verified (N6LPATCH50GR)

  • HIGH PERFORMANCE LSZH CAT6 ETHERNET CABLE: 100% copper, Ethernet cable for error-free Multi Gigabit/Multi-speed 1/2.5/5Gbps connections.
  • Complies with ANSI/TIA-568-2.D Category 6 requirements.
  • LSZH CABLE WITH 100W PoE: Low Smoke Zero Halogen Ethernet patch cord with 24 AWG cable, stranded copper conductors supports various PoE devices up to 100W PoE++.
  • ETL VERIFIED PURE COPPER CABLE: This Fluke Tested & ETL Verified 50ft snagless LAN cable with 100% copper Ethernet wire delivers error-free data & safe PoE power, unlike the lower quality copper-clad aluminium versions from other brands.
  • ECO-FRIENDLY AND QUALITY CONSTRUCTION: Eco-friendly (PVC free) LSZH cable produces lower levels of smoke & toxic (acidic) fumes in case of fire.
  • PVA co-polymer jacket resists bending or fraying damage.
  • 50-micron gold-plated pins improve signal integrity.
  • SPECS: Length: 50ft (15.2m) Cat 6 Network Cable | Color: Gray | 650 MHz Rated | Structure: 4 Pair U/UTP | RJ45 Connectors | Jacket: PVA, Al(OH)3 | Fire Rating: LSZH | 24 AWG Copper | Wiring: ANSI/TIA-568-B | ETL Verified | Warranty: Lifetime.
Check Stock

MokerLink 4 Port PoE Extender, IEEE 802.3 af/at PoE Repeater, 100Mbps, 1 PoE in 3 PoE Out, Wall & Din Rail Mount POE Passthrough Switch

  • 4 PoE Ports: Include 1 PoE In, 3 PoE Out, 10/100Mbps speed. POE transmission distance 100 meters..
  • IEEE 802.3 af/at: All ports support this standard PoE, Input Max 30W, Output Max 24W, Average 8W per port. PoE Voltage 44-57 Vdc. PoE pin: Input, 1/2 (-), 3/6 (+), 4/5(+), 7/8(-).
  • Unmanaged Plug & Play: Support power detection function, automatically detect devices, just plug in the ethernet cable, connect directly to the device, without configuration..
  • Easy Installation: No need for additional power adapter, powered by POE network. Support wall mount and din rail mount, small size, save space, suitable for more positions.
  • Widely Used: Support 3-level cascading, can connect poe AP, camera, phone and other POE devices, increase POE coverage at low cost.
Check Stock