Top Poe Pd Module

Edimax GS-5416PLC Long Range 16-Port Gigabit Poe+ Web Smart Switch with 4 Rj45/Sfp Combo Ports,Up to 30W per Port Total Power Budget 330W for powering PoE-Enabled Devices,Supports SNMP v3

  • 16 Gigabit Ethernet ports and four RJ45/SFP combo ports.
  • Up to 30W per port (total power budget: 330W) for powering PoE-enabled devices.
  • Auto-detection of powered devices (PD) and Power consumption levels.
  • Poe powered devices (PD) alive check to enhance the reliability of the network.
Check Stock

BV-Tech 10 Port PoE/PoE+ Switch (8 PoE+ Ports | 2 Gigabit Ethernet Uplink) – 96W – 802.3af/at| POE-SW811

  • 8 PoE+ Ports at 10/100Mbps each, 2 Uplink ports at 10/100/1000Mbps each.
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-8 up to 30W per port, which is better than normal PoE port that can only provide 15.4W per port..
  • PD detection will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**.
  • 100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support.
Check Stock

ThePoEstore 60W Gigabit PoE Injector Up to 60W Ultra Power Supply 10/100/1000Mbps IEEE 802.3at/802.3af Compliant Plug & Play

  • 1 CH Gigabit Ethernet port input and PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds..
  • Auto-sensing technology delivers up to 802.3at 60W to a PoE+ device with backwards compatibility for 802.3at(30w) and 802.3af PoE (15.4W) devices. Not....
  • Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away..
  • Use PoE Injector with PD to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or....
  • LED power input indicators for and PoE output,Internal AC/DC converter no need for external power brick ,Easy plug-and-play installation..
Check Stock

POE IP Camera POE Network Camera ModuleBlueFishcam IP Security Board Camera for DIY/Repair/Upgraded (2MP, 3 Lenses)

  • 2MP 1080P POE IP board Camera network Security camera module 2.8mm,3.6mm & 6mm fixed lenses Hidden Camera Indoor Security Surveillance Motion Detection for DIY/repair/upgrade.
  • Advanced H.265X/H.264 video compression,Super low rate,high definition quality of image.
  • Support various mobile monitoring(iPhone,Android).
  • Support POE IEEE8023af/at, And it's with additional assisted power supply. Power supply required: 12V 2A or above 2A.
  • Package content: 1 piece of POE mini IP board camera/network camera module..
Check Stock

YIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play

  • 【6 Port PoE+ Switch】4*10/100Mbps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 78W for the whole..
  • 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
  • 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the ....
Check Stock

BV-Tech 6 Port PoE+ Switch 4 PoE+ Ports with 2 Ethernet Uplink and Extend Function – 60W – 802.3at + 1 High Power PoE Port| Desktop Fanless Design | Sturdy Metal Housing

  • 4 PoE+ Ports and 2 Ethernet Uplink Ports at 10/100Mbps each, making network setups easier and more convenient..
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-4 up to 30W per port, which is better than normal PoE port that can only provide 15. 4W per port. 60W Max Total Power (includes 60W DC adapter)..
  • Extend function extending max PoE transmission distance from 100 meters to 250 meters.
  • PD detection will automatically detect and provide required power for your PoE devices **This is a 48V active PoE, NOT compatible with Ubiquiti devices which require 24V Passive PoE. **.
  • 100% Satisfaction – 30-day Money-Back with 1 Year Warranty and Lifetime Tech Support.
Check Stock

TRENDnet Inline PoE Tester, TC-NTP1, Tests 4PPoE, PoE+, PoE & Passive PoE Technology, Wattage, Voltage, Amperage, Polarity, LED Display, Battery-Free, Troubleshoot PoE Issues, IEEE 802.3af/at/bt

  • PORTS: This Inline PoE tester is equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PoE Device connection.
  • TESTING MODES: The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD.
  • USER FRIENDLY: The TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box.
  • COMPATABILITY: The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V..
  • STEP BUTTON: The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring..
  • TROUBLESHOOT IN REAL TIME: Troubleshoot PoE issues in real-time on-the-go and accurately test 4PPoE, PoE+, PoE, and passive PoE technologies with this compact and lightweight PoE testing tool..
Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

BV-Tech 6 Port PoE+ Gigabit Switch (4 PoE+ Gigabit Ports with 2 Gigabit Uplink and Extend Function) – 60W – 802.3at + 1 High Power PoE Port| Desktop Fanless Design | Sturdy Metal Housing

  • 4 Gigabit PoE+ Ports and 2 Ethernet Uplink Ports at 10/100/1000 Mbps each, making network setups easier and more convenient..
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-4 up to 30W per port, which is better than normal PoE port that can only provide 15.4W per port. 60W Max Total Power (includes 60W DC adapter)..
  • Extend function extending max PoE transmission distance from 100 meters to 250 meters.
  • PD detection will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**.
  • 100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support.
Check Stock

8MP POE IP Camera with IR-Cut POE Network Camera Module BlueFishcam 4K IP Security Board Camera for DIY/Repair/Upgrade (8MP-4K, 3.6mm)

  • 4K Board IP camera module 8MP POE camera network Camera Module with 3.6mm fixed lens for DIY.
  • 1/2.8” Ultral Low-illumination Progressive Scan CMOS, 4K 8MP high resolution3840*2160 @ 20fps..
  • Embedded Web Server, support Internet Explore monitoring, configuration, upgrade, H.265/H.264 high compression , two simultaneous video streams.
  • Package: 1 piece of POE IP board Camera for DIY. It's with POE function, you can use normal power supply,too. Power required: DC 12V 2A.
Check Stock

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

  • 【11port poe switch@150W 】PoE switch with 8 100M port PoE + 2 1000M Uplink port+ 1 SFP port, 8×PoE ports providing up to 30W per port, total PoE budget 150W, 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..the SFP slot can choose the optcial model with 2km,10km,20km,40km...etc..
  • 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
  • 【Plug and Play】Easy setup with no software installation or configuration needed.
  • 【Network cable short-circuit protection mechani....
Check Stock

Heayzoki Power Supply Module for Raspberry Pi 4B / 3B + Ethernet POE Fan Electronic Component,for Raspberry Pi Ethernet POE Fan Power Supply Module

  • This product provides a convenient and cost-effective way to power equipment..
  • This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
  • This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
  • For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
  • With small size, easy to carry and store, convenient to use and with good performance..
Check Stock