Top Poe Pole Mount
Ubiquiti POE POE-24-12W-5P - 24V DC 0.5A 12W - Power Over Ethernet Replacement PoE Adapter 5-pack
- Ubiquiti PoE POE-24-12W - 24V DC 0.5A 12W - Power Over Ethernet Replacement PoE Adapter (5-pack).
- Ubiquiti Networks POE-24-12W is for use with airMAX and UniFi products. It's a replacement 12V, 12W PoE adapter, with remote hardware reset circuitry..
- The POE-24 (24V, 12W) features earth grounding/ESD protection, power LED, and is available in USA (NEMA 5-15). Remote re-start capability is a key....
- PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable, they provide earth grounding and surge protection to help protect against....
- The 24V, 0.5A models, POE-24-12W, are wall-mountable using the optional wall-mount brackets..
Check StockTRENDnet 6-Port Hardened Industrial Gigabit PoE+ DIN-Rail Switch 4 x Gigabit PoE+ Ports Shared Gigabit Port RJ-45/SFP Dedicated SFP 120W Power Budget IP30 Lifetime Protection Black TI-PG62
- ETHERNET PORT INTERFACE: 4 x Gigabit PoE+ ports, 1 x shared Gigabit port (RJ-45/ SFP), 1 x Dedicated SFP slot.
- POE POWER & SWITCHING CAPACITY: The 6 Port Gigabit PoE+ DIN-Rail Switch has a 12 Gbps switching capacity and 120 Watt PoE+ power..
- EXTREME TEMPERATURE SWITCH: This Gigabit PoE+ Switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments..
- DIN-RAIL & WALL MOUNT KIT: This 6-port Gigabit PoE+ industrial switch comes with an integrated DIN-rail mount and mounting hardware..
- REDUNDANT POWER: The 6 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: TI-S15052, TI-S24052, TI-S12048, TI-S24048, 48VDC3000).
Check StockTRENDnet 10-Port Industrial Gigabit PoE+ DIN-Rail Switch, 8 x Gigabit PoE+ Ports, DIN-Rail Mount, 2 x SFP Slots, 240W PoE Power Budget, Network Switch, IP30, QoS, Lifetime Protection, Black, TI-PG102
- ETHERNET PORT INTERFACE: 8 x Gigabit PoE+ ports, 2 x Gigabit RJ-45 / SFP shared ports.
- POE+ POWER & SWITCHING CAPACITY: A 20Gbps switching capacity and 240W PoE power budget supplies up to eight Power over Ethernet devices with PoE+ power.
- DIN-RAIL & WALL MOUNT KIT: This 10-Port gigabit PoE+ industrial switch comes with an integrated DIN-Rail mount and mounting hardware.
- EXTREME TEMPERATURE SWITCH: The metal hardened IP30 rated gigabit PoE+ switch is equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate with a wide temperature range (- 40 – 75 °C (- 40 - 167 °F)) for harsh environments.
- REDUNDANT POWER: The 10 port network switch has dual redundant power inputs with overload current protection (power supply sold separately: models: 48VDC3000 / TI-S24048.
- GROUDING POINT: 10-port Ethernet switch grounding point feature protects equipment from external electrical surges.
- SHOCK & VIBRATION RESISTANT: The Ethernet switch is rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6).
Check StockLoocam PoE Switch 4 Port, 5 Port Gigabit PoE Switch – 4 Port PoE+ @ 65W and 1 Uplink Port, Unmanaged Ethernet Network Switch PoE, Plug and Play
- ... and Reliable Data Transmission: Energy saving design compliant with IEEE802.3az. Support IEEE 802.3X flow control, ensure stable, reliable and efficient data transmission. Sturdy metal casing with low power consumption fanless design to ensure silent operation. Compact size 5.12*3.46*1.18 inch with desktop or wall mount methods are well-suited for different environments..
Check StockLINOVISION Industrial 8-Port Full Gigabit Solar POE Switch with DC12V/DC24V to DC48V Voltage Booster, IEEE802.3at with Total POE Budget 240W, POE Power Supply for Solar Power/RV Truck/VoIP Systems
- DC12V ~ DC48V POE VOLTAGE BOOSTER - Supply standard IEEE802.3af/at POE power with DC12V/DC18V/DC24V/DC36V/DC48V input.
- 8-PORT FULL GIGABIT POE SWITCH - Providing 8*10/100/1000Base-T Ethernet PoE ports and 2*1000Base-X SFP slots (Fiber module is not included). Each POE ports are compliant to IEEE802.3af/at standard. It supports one-key fast ring fiber network and broadcast storms protection (BSP).
- INDUSTRIAL DESIGN FOR HARSH ENVIRONMENT - Fanless design and wide working temperature (-40℃ ~ 75℃ or -40 ℉ ~167 ℉).
- POE WATCHDOG - Realtime monitoring POE load device's status and will automatically reboot POE port when the connected device is not active. It proivdes non-stop running of POE device, like security cameras, IP speakers and IP phones.
- TOTAL 240W POE BUDGET - Up to 30W per POE port, and total 240W POE budget (DC48V input), or 120W (DC24V input), or 80W (DC12V input).
- NON-STOP POE SUPPLY WITH DUAL POWER INPUT - Support 2 channel DC12V-48V redundant power inputs and auto failover, ensure high reliability networking system.
- APPLICATION - For solar power system, vehicle, RV, VoIP IP phone system, robust fiber ring network.
Check StockStarTech.com StarTech.com 1-Port 10/100 Mbps Parallel Network Print Server - Fast Centronics Ethernet Printer Server Adapter - Windows 10 (PM1115P2)
- Delivers reliable wireless throughput up to 3.7 kilometers or 2.3 miles even through harsh weather conditions.
- PoE powered for versatile installation with no power outlet required.
- Weather-tight IP67 certified metal housing.
- Withstand the harsh elements, with the rugged metal IP67 rated housing.
- Operate efficiently with less interference from other devices, through 5Ghz operation at 300Mbps.
- Customize your wireless network as needed, with support for several operating modes.
- IEEE 802.11a/n (Wireless-N) compliant with speeds up to 300 Mbps at 5GHz.
- Metal, IP67 certified pole and wall-mountable housing.
- Poe-powered access point with included Poe injector and Poe pass-through.
- Supports AP, WDS and WISP operating modes.
Check StockRaspberry Pi 3 Model B+ Board (3B+)
- 1.4GHz 64-bit quad-core processor, dual-band 2.4GHz and 5GHz wireless LAN. Bluetooth 4.2/BLE, faster Ethernet, and PoE support (with separate PoE HAT)..
- Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps), 4 × USB 2.0 ports and Extended 40-pin GPIO header..
- 1 × full size HDMI, MIPI DSI display port, MIPI CSI camera port, 4 pole stereo output and composite video port..
- 1GB LPDDR2 SDRAM;Micro SD format for loading operating system and data storage. (Micro SD is Not included.).
Check StockBuffalo Girls
- Two installation methods: This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you..
- 150 degree adjustment: The rod of wireless bridge bracket mount can be adjusted up and down by 150°. After you install the CPE, adjust the angle of the rod to receive signals of different strengths..
- Firmness: This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod..
- Waterproof: The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which makes this bracket mount a good waterproof performance. It’s very suitable for outdoor use..
- Wide application: This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some AP can also use it..
Check StockCudy GS1005P 5 Port Gigabit Ethernet Unmanaged PoE+ Switch, with 4 x PoE+ @ 60W, Desktop/Wall, Sturdy Metal Fanless Housing, 802.3af, 802.3at, Shielded Ports, Traffic Optimization, Plug and Play
- 5 Port PoE+ Switch: 5 Gigabit Ethernet ports, 4 PoE+ ports with 60W total power budget, Maximum 30 Watts Per Port.
- Power-Over-Ethernet (PoE) and PoE+ options available for powering IP Security Cameras, VoIP phones, wireless access points, and other PoE-powered devices. Pin assignment: alternative 1/2 (+), 3/6 (-)..
- The fanless design means zero added noise to this poe switch, making it ideal for noise-sensitive environments..
- Plug and play, simple set up with no configuration needed. Made of high-quality metal case, sturdy and durable with long service life, provide better heat dissipation, suitable for most environment. Pin assignment, Mode A: 1/2(+),3/6(-).
- Supports desktop or wall mount placement..
Check StockA ANNTLENT Pole Mount L-Type for Outdoor Antenna - Universal 12inch Length Outside Antenna Mounting Pole for Cell Phone Signal Booster Antenna-Pole Mount Bracket
- 【Longer length】This L-type antenna pole mount is 12 inches in length and 1.5 inches in diameter. Length of L-type Pole Mount is longer, which....
- 【Universal Use】The antenna pole mount is suit for outdoor use, suitable for various kinds of antennas and can be installed on building wall or....
- 【Weatherproof】The antenna pole mount is designed with high-quality stainless steel material, which is corrosion-resistant, rust-proof, not easy to....
- 【Easy Installation】This mount pole is designed to install an outdoor antennas for all cell phone signal boosters. Antenna pole mast contains....
- 【Manufacturer Warranty】Pole Mount enjoys 30-day money-back guarantee, 2-month free replacement, 1-year manufacturer warranty. Any problem during....
Check StockMikroTik CRS354-48G-4S+2Q+RM
- The RB2011iL-IN is the most basic model, with five Gigabit ethernet ports, five Fast ethernet ports, power jack and PoE support..
- It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license..
- There is PoE output function for port #10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA..
- RouterBOARD 2011iL-IN comes with desktop enclosure and power supply..
- Wall mount kit for network closet is available for purchase as an optional accessory..
Check StockUeevii Universal Wireless Bridge Bracket Mount, Pole and Wall-Mounted Mount for Outdoor Point to Point AP Access Point Client Bridge CPE
- Two installation methods: This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you..
- 150 degree adjustment: The rod of wireless bridge bracket mount can be adjusted up and down by 150°. After you install the CPE, adjust the angle of the rod to receive signals of different strengths..
- Firmness: This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod..
- Waterproof: The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which makes this bracket mount a good waterproof performance. It’s very suitable for outdoor use..
- Wide application: This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some AP can also use it..
Check Stock