Top Poe Power Budget

YIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play

  • 【6 Port PoE+ Switch】4*10/100Mbps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 78W for the whole..
  • 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
  • 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the ....
Check Stock

YIDUOYUNCAI 11Port PoE Switch,8 Port 100Mbps PoE+2*1000Mbps Uplink Port and1Gigabit SFP Slot,150W,802.3af/at,Metal Fanless,Unmanaged Plug and Play

  • 【11port poe switch@150W 】PoE switch with 8 100M port PoE + 2 1000M Uplink port+ 1 SFP port, 8×PoE ports providing up to 30W per port, total PoE budget 150W, 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..the SFP slot can choose the optcial model with 2km,10km,20km,40km...etc..
  • 【Active poe switch with 802.3af/at compliant】poe switches support poe devices and non-poe devices, but when connecting passive poe device or non-poe device, the switch can only transmit data and cannot power your device, so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Built-in power supply】The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch..
  • 【Plug and Play】Easy setup with no software installation or configuration needed.
  • 【Network cable short-circuit protection mechani....
Check Stock

Loocam PoE Switch 4 Port, 5 Port Gigabit PoE Switch – 4 Port PoE+ @ 65W and 1 Uplink Port, Unmanaged Ethernet Network Switch PoE, Plug and Play

  • Full Gigabit 5 Port PoE Switch: Unmanned PoE switch with 4 10/100/1000 Mbps RJ45 PoE+ ports and 1 Gigabit Ethernet Uplink port, 4 PoE+ ports providing up to 30W per port, total PoE power budget 65W(Include 48V 1.35A external power supply).
  • Power Over Ethernet, Plug And Play: Compliant with IEEE 802.3af/at POE standard, this gigabit unmanaged poe switch 4 port can automatically detect and identify PD devices that comply with the standard and supply them with power through the network cable. Plug and play, easy setup with no software configuration required. It can meet the POE power supply requirements of security monitoring, teleconferencing systems, wireless coverage and other scenarios..
  • 300 Meters Extend Transmission: Automatically detect the transmission distance and adjust the transmission rate, extend up to 300m(980ft) data and power PoE transmission range (Speed will drop to 10 Mbps). For better result over long distances transmission, use cat5e cables or above..
  • PoE Auto Recovery: This 4 port gigabit poe switch equipped with professional poe chip, it can intelligently detect the data exchange between the poe port and the terminal device. When an abnormality is detected, it will automatically restart and return to normal without affecting other po....
Check Stock

Mikrotik CRS326-24G-2S+RM Network Switch L2 Gigabit Ethernet (10/100/1000) Grey Power Over Ethernet (PoE)

  • The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps..
  • All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing.
Check Stock

Zyxel 24-Port Gigabit PoE Switch | Smart Managed | Rackmount | 24 PoE+ Ports with 130 Watt Budget [GS1900-24EP]

  • PORT CONFIGURATION - Fast networking performance with 24 Gigabit Ethernet ports.
  • SMART POWER - "Consumption Mode" allocates power efficiently, allowing the PoE budget to power more devices. Smart PoE+ 802.3af/802.3at support with a max of 30W per port (130W total budget).
  • SMART MANAGED - Get up and running in minutes: Web-based setup wizard enables simple and fast configuration and management.
  • LAYER 2 FEATURES - VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS prevention enable better security and management.
  • ENTREPRISE GRADE WARRANTY - Limited Lifetime warranty and free firmware upgrade support.
Check Stock

Cudy FS1006P 6-Port 10/100M PoE Switch 60W, 4 PoE Ports, CCTV Mode (Transmit Distance to 250m at 10Mbps), PD Detection,Fan-Less, Steel Case, Desktop and Wall-Mount, 802.3at / 802.3af

  • 6 Ethernet ports, 4 port PoE+ with 60W total power budget, 2 port uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
  • Power over Ethernet with 802.3at and 802.3af compliant. Power-Over-Ethernet (PoE) and PoE+ options available for powering IP Security Cameras, VoIP phones, wireless access points, and other PoE-powered devices..
  • CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • With PD detect function, this PoE switch support auto detect power device, will not burned non-standard PoE device or normal PoE switch. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • High Quality chipset inside: Use high quality POE chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock

ZyXEL VMG4825 B10A - WIRELESS AC/N VDSL2 COMBO WAN (VDSL+GBE WAN) MODEM GBE GATEWAY AC

  • PORT CONFIGURATION - Fast networking performance with 24 Gigabit Ethernet ports.
  • SMART POWER - "Consumption Mode" allocates power efficiently, allowing the PoE budget to power more devices. Smart PoE+ 802.3af/802.3at support with a max of 30W per port (130W total budget).
  • SMART MANAGED - Get up and running in minutes: Web-based setup wizard enables simple and fast configuration and management.
  • LAYER 2 FEATURES - VLAN, QoS, IGMP Snooping, Link Aggregation (LAG), IPv6 and DoS prevention enable better security and management.
  • ENTREPRISE GRADE WARRANTY - Limited Lifetime warranty and free firmware upgrade support.
Check Stock

Cudy GS1010P 10-Port Gigabit Ethernet Unmanaged PoE Switch, with 8 x PoE+ @ 120W, Desktop/Rackmount, CCTV/VLAN Mode, 802.3af/ 802.3at, Plug and Play

  • 10 Gigabit Ethernet ports, 8 port PoE with 120W total power budget, 2 port gigabit uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
  • PD Detect and Port Power Prioritization: With PD Detect Auto-sensing technology, this 8 port PoE switch delivers up to 32W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices.Port-Power-Prioritization technology guarantees continuous power supply of key nodes. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • CCTV mode support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • VLAN mode support isolate 8 PoE+ port from each other. It is easy for this 8 port PoE switch to manage and maintain which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
  • High Quality chipset inside: Use TPS POE chip high quality chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock

TRENDnet 9-Port Unmanaged Fast Ethernet Long Range PoE+ Switch 8 x Fast Ethernet PoE+ And 1 x Fast Ethernet Port Extend PoE+ Up To 250m 820 ft At 10Mbps 1.8Gbps 60W Power Budget Black TE-FP091

  • DEVICE INTERFACE: 8 x Fast Ethernet PoE+ ports.
  • PoE+ POWER: This network Ethernet switch provides a 60W PoE power budget and supports up to eight Power over Ethernet devices..
  • POE TECHNOLOGY: With PoE technology, users only need one set of cables to deliver both data and power simultaneously which reduces equipment cost by....
  • FAST ETHERNET: Nine Fast Ethernet (10/100Mbps) ports provide a 1.8 Gbps switching capacity to support edge network installations..
  • LONG RANGE POE+ SWITCH: Extend your PoE+ signal up to 250m (820 ft.) at 10Mbps for long distance PoE installations by enabling the DIP switch..
Check Stock

TRENDnet 12-Port Gigabit PoE+ Smart Surveillance Switch, TPE-3012LS, 8 x Gigabit PoE+ Ports, 2 x Gigabit Ports, 2 x SFP Slots, 110W PoE Budget, Managed Switch, Long Range PoE+ up to 200m (656 ft)

  • DEVICE INTERFACE: 8 x Gigabit PoE+ Ports.
  • 4-Digit PoE LED display (total power budget, available power, consumption per port).
  • SMART SURVEILLANCE MANAGEMENT: These managed ONVIF switches are optimized for the surveillance industry.
  • surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected device..
  • LONG RANGE POE+: Long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps.
  • INTEGRATION FLEXIBILITY: Managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP, and syslog for monitoring and flexible network integration..
  • POE DEVICE ALIVE CHECK: Feature that attempts to recover an unresponsive PoE device connected to the switch. If a device(ex. PoE camera) is unresponsive, the switch auto-reboots the PoE port attempting to recover the device.
  • POE POWER: Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices.
  • HARDWARE DESIGN: Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19” rackmount design with brackets included.
  • SURVEILLANCE MODE: ONVIF switches are optimized for the surveillance industry, provin....
Check Stock

Linksys LGS108P: 8-Port Business Desktop Gigabit PoE+ Unmanaged Switch, Ethernet Plus, Local Wired Network Connection Speed up to 1,000 Mbps

  • 8, 16, or 24 Gigabit Ethernet autosensing ports. No fans.
  • Quality of Service (QoS) traffic prioritization.
  • Power over Ethernet (PoE+) support. Please note: Product is an 8 port switch with 4 PoE+ ports (first 1–4 ports) and dedicated PoE power budget of 50 W.
Check Stock

EnGenius Neutron IEEE 802.11n Wireless LAN Controller - 48 x Network (RJ-45) - PoE Ports - Rack-mountable

  • 16 Gigabit and 8 2.5-Gigabit PoE Ethernet Ports.
  • 802.3 at/af PoE+ Ready on All Ports with 410W PoE budget.
  • 4 10-Gigabit Dual-Speed SFP+ (fiber) uplink ports.
  • Real-Time System Metrics, Deep-Dive Analytics and Remote Configurations.
  • Quick-Scan Device Register, Remote Monitoring and Troubleshooting.
  • Continuous PoE Power – Steady supply of PoE power for camera during switch upgrades.
  • 802.3ad Link Aggregation (LACP) Supports Traffic Load Balancing.
  • Energy Efficient Ethernet (802.3az) improves energy savings when used with other compliant devices.
Check Stock