Top Poe Splitters 3 Pack

LINOVISION Mini 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP

  • 【2-PORT POE SPLITTER】This 2-port POE extender is designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable..
  • 【UP TO 1,000FT POE + DATA EXTENTION】Extra 330ft POE+Data transmission will be extended with one Linovision POE Extender. And it supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
  • 【COMPLIANT TO IEEE802.3AF/AT STANDARD】This POE Extender works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE Outputs supply power to standard POE devices (don't support 24V POE Devices) , like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease..
  • 【EASY TO CONFIGURE IP CAMERA ON SITE】By interting this PoE-Extender02 to an existing PoE cable, ....
Check Stock

NETGEAR ProSAFE WAC720 Business 2x2 Dual Band 802.11ac Wireless Access Point, 3-Pack (WAC720B03-100NAS)

  • Business class Wireless Access Point with superior 2x2 Dual Band 802.11ac performance (up to 1.2 Gbps) - 3 Pack.
  • Flexible Quad Mode management (standalone, Ensemble, Controller, and Business Central cloud).
  • Ensemble mode centrally manages up to 10 APs with no additional hardware or software.
  • 802.3af Power-over-Ethernet (PoE) support for ease of deployment (PoE switch & AC/DC power adapter are not included).
Check Stock

【Upgraded】LINOVISION POE Over Coax EOC Converter IP Over Coax Max 3000ft Power and Data Transmission Over Regular RG59 Coaxial Cable for Upgrading Analog Surveillance System to IP Surveillance System

  • 【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
  • 【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart..
  • 【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight..
  • 【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-poi....
Check Stock

NETGEAR ProSAFE WAC720 Business 2x2 Dual Band 802.11ac PoE Wireless Access Point (WAC720-100NAS)

  • Business class Wireless Access Point with superior 2x2 Dual Band 802.11ac performance (up to 1.2 Gbps) - 3 Pack.
  • Flexible Quad Mode management (standalone, Ensemble, Controller, and Business Central cloud).
  • Ensemble mode centrally manages up to 10 APs with no additional hardware or software.
  • 802.3af Power-over-Ethernet (PoE) support for ease of deployment (PoE switch & AC/DC power adapter are not included).
  • LIFETIME WARRANTY, LIFETIME Next Business Day Replacement, LIFETIME Advanced Tech Support via chat.
Check Stock

Mikrotik RB3011UIAS-RM RouterBOARD 10xGigabit Ethernet, USB 3.0, LCD, RB3011

  • The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher performance than ever before.
  • The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a SuperSpeed full size USB 3.0 port, for adding storage or an external 3G/4G modem.
  • RB3011UiAS-RM Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port.
  • Dimensions: 443 x 92 x 44 mm, Size of RAM: 1 GB, Storage size: 128 MB, PoE in: Passive PoE, PoE-out ports: Ether10, PoE out: Passive PoE.
  • 10/100/1000 Ethernet ports: 10, SFP ports: 1, Number of USB ports: 1, USB slot type: USB 3.0 type A, PCB temperature and Voltage monitor.
Check Stock

Zyxel 8-Port Gigabit Ethernet Layer 2 Managed PoE+ Switch with 180 Watt Budget and 2 Gigabit Combo Ports and Hybrid Cloud Mode [GS2220-10HP]

  • Fully managed layer 2 switching solution. 8 port PoE+ GbE 100/1000 Mbps + 2 port GbE combo (SFP/RJ-45) (10 ports total)..
  • 180W PoE+ (802.3af/ 802.3at) power budget with intuitive 5-segment PoE indicator which gives quick view of current PoE usage..
  • NebulaFlex Pro gives you the flexibility to switch between standalone and intuitive Nebula cloud managed mode with 1-Year Pro Pack bundled..
  • L2 multicast, IGMP snooping, MVR and voice VLAN for convergence. Enhanced network protection with IP source guard, DHCP Snooping, ARP inspection, CPU protection..
  • Fan-less design delivers silent operation..
Check Stock

Real Carbon Fiber Front Bumper Lip Splitters for BMW 2007-2013 E90 E92 E93 M3 Sedan/Coupe/Convertible

  • FITS: 2007-2013 BMW E90/E92/E93 M3 Only (Will Not Fit Regular 3 Series).
  • Package Includes : A Pair of Carbon Fiber E92/E93 M3 Front Bumper Splitters (Both Left and Right Sides).
  • Direct Add-On Performance Style M3 Coupe Bumper Splitters.
  • Made of High Quality Carbon Fiber Material..
  • dramatically enhance the sporty appearance of your M3.
Check Stock

Triplett LVPRO30SR Network Cable Tester/Verifier with 12 Tester Apps and 8 RJ45 Smart Remotes - Coax, CAT5/5e/6/6a/7, Shielded/Unshielded

  • Run a variety of cable testing procedures including Cable Map, Ethernet Switch Port Blink, Speaker Pop, Cable Length, PoE Volts, Battery Test, and 10/100/1000 indication.
  • Preloaded with a powerful cable testing pack and 13 device testing apps, plus Length Return Loss Quality (RLQ) Pack Apps, Alert LEDs to indicate POE, Tone Locator, Port Blink, Speaker Pop, Speaker 7.1 ID and Wall Jack ID.
  • Perform detailed wire map and measure cable length and distance to open or short.
  • Check line voltage on RJ45 (PoE) and telephone lines.
  • Includes 10 RJ45 remotes, 10 Coax remotes, F Male to BNC Male, F Male to BNC Female RJ45 patch cable (2), RJ45 to alligator clip adapter, USB cable, case, 9V battery, RLQ adapters and SR remotes.
Check Stock

Loocam PoE Switch 4 Port, 5 Port Gigabit PoE Switch – 4 Port PoE+ @ 65W and 1 Uplink Port, Unmanaged Ethernet Network Switch PoE, Plug and Play

  • Full Gigabit 5 Port PoE Switch: Unmanned PoE switch with 4 10/100/1000 Mbps RJ45 PoE+ ports and 1 Gigabit Ethernet Uplink port, 4 PoE+ ports providing up to 30W per port, total PoE power budget 65W(Include 48V 1.35A external power supply).
  • Power Over Ethernet, Plug And Play: Compliant with IEEE 802.3af/at POE standard, this gigabit unmanaged poe switch 4 port can automatically detect and identify PD devices that comply with the standard and supply them with power through the network cable. Plug and play, easy setup with no software configuration required. It can meet the POE power supply requirements of security monitoring, teleconferencing systems, wireless coverage and other scenarios..
  • 300 Meters Extend Transmission: Automatically detect the transmission distance and adjust the transmission rate, extend up to 300m(980ft) data and power PoE transmission range (Speed will drop to 10 Mbps). For better result over long distances transmission, use cat5e cables or above..
  • PoE Auto Recovery: This 4 port gigabit poe switch equipped with professional poe chip, it can intelligently detect the data exchange between the poe port and the terminal device. When an abnormality is detected, it will automatically restart and return to normal without affecting other po....
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....
Check Stock

Cudy FS1006P 6-Port 10/100M PoE Switch 60W, 4 PoE Ports, CCTV Mode (Transmit Distance to 250m at 10Mbps), PD Detection,Fan-Less, Steel Case, Desktop and Wall-Mount, 802.3at / 802.3af

  • 6 Ethernet ports, 4 port PoE+ with 60W total power budget, 2 port uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
  • Power over Ethernet with 802.3at and 802.3af compliant. Power-Over-Ethernet (PoE) and PoE+ options available for powering IP Security Cameras, VoIP phones, wireless access points, and other PoE-powered devices..
  • CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • With PD detect function, this PoE switch support auto detect power device, will not burned non-standard PoE device or normal PoE switch. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • High Quality chipset inside: Use high quality POE chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock

Triplett Low Voltage Pro 30SR Network Cable Tester/Verifier with 12 Tester Apps and 8 RJ45 Smart Remotes - COAX, CAT5/5e/6/6a/7, Shielded/Unshielded

  • Run a variety of cable testing procedures including Cable Map, Ethernet Switch Port Blink, Speaker Pop, Cable Length, PoE Volts, Battery Test, and 10/100/1000 indication.
  • Preloaded with a powerful cable testing pack and 13 device testing apps, plus Length Return Loss Quality (RLQ) Pack Apps, Alert LEDs to indicate POE, Tone Locator, Port Blink, Speaker Pop, Speaker 7.1 ID and Wall Jack ID.
  • Perform detailed wire map and measure cable length and distance to open or short.
  • Check line voltage on RJ45 (PoE) and telephone lines.
  • Includes 10 RJ45 remotes, 10 Coax remotes, F Male to BNC Male, F Male to BNC Female RJ45 patch cable (2), RJ45 to alligator clip adapter, USB cable, case, 9V battery, RLQ adapters and SR remotes.
Check Stock