Top Pokerstars Patch

American Flag Patch, Tactical Military Flag Patches, American Military Flag Emblem Patch. (Black Gray)

  • Tactical Flag Patch Size：2 inch x 3 inch,Can be used with Condor, Tru-Spec and other Operator / Contractor Caps.
  • Emblem patch with Hook and Loop Patch, Repeated use.
  • The Tactical Flag Patch adopts 3D Embroidery: Bright Color, The Edge of the Patch is Neat, The Embroidery is Exquisite, and it is Easy to Disassemble and Clean..
  • Tactical American Flag Emblem Patch Can be Used as Your Jacket Patches, Tactical Hat Patches Flag, Tactical Backpack Patches Flag, Outdoor Clothing Patch Flag, This American Flag is Your Very Good Decoration..
  • You Will Receive: 2 Tactical USA Flag Patch.
Check Stock

Muc Off Puncture Plug Repair Kit - Puncture Repair Kit for Tubeless Bike Tyres - Includes 2-in-1 Puncture Plug/Reamer Tool, 10 Puncture Plugs & Pouch

  • RoRide Patch Kit Combo - Includes 2 types of bicycle tire patch kit - a vulcanizing bike patch repair kit and also a self-adhesive inner tube patch kit..
  • Get Back On The Trail Fast - Use the self adhesive bike patch kit when you need to get up and going quickly. Use the vulcanizing bike tube repair kit when you want a more permanent fix..
  • Perfect For All Types Of Cycling - Our bike tube patch kit works equally well on mountain, road or bmx bicycles that use inner tubes. Do not try to patch tubeless tires with this bicycle patch kit..
  • Easy To Use - RocRide patch kits for bike tires are designed to be quick and easy to use. Just pick the type of patch appropriate for your repair and follow the included instructions..
  • Here To Keep You Riding--And Happy - Our patch kit for bike tires will quickly have you back on the trail or road and enjoying the rest of your ride. We also want to make sure you are happy with your purchase. If not satisfied we will replace your product or refund your purchase..
Check Stock

Broken Wings Patch Small - 5x1.75 inch

  • Broken Wings Patch Small measures 5x1.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your l....
Check Stock

Tripp Lite Cat6 Wall-Mount PoE+ Compliant Patch Panel 12-Port 110/Krone 568A/B RJ45 Ethernet TAA (N250-P12)

  • 12 PORT CAT6 PATCH PANEL: This patch panel enables quick, easy cable patching. Just plug Cat6 patch cables into its 12 front RJ45 ports, and use a 110 or Krone punch-down tool to terminate color-coded connections in the rear..
  • POWER OVER ETHERNET PLUS: This PoE+ patch panel maximizes performance with PoE+ applications. Power over Ethernet patch panel prevents spark-gap erosion that can affect transmission..
  • WALL MOUNTING: Durable aluminum panel with ABS plastic frame that mounts easily to wall or desk. Included cable ties and a removable cable management bracket help organize your connections..
  • WIRING STANDARDS: The N250-P12 supports EIA/TIA 568A and 568B wiring standards and is compatible with all network applications. This PoE+ patch panel is TAA-Compliant for GSA schedule purchases. Also known as: poe Ethernet patch panel / poe network panel / network patch panel / Cat6 patch panel / Cat 6 patch panel..
Check Stock

Oakland Patch - 4x1 inch. Embroidered Iron on Patch

  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to....
Check Stock

Savage Patch Kids [Explicit]

  • PULL PATCH ATTACH PROCESS – Honestly, we wouldn’t even call it a “process” because our patches are so simple to attach. All you need is a hat, but don’t worry as Pull Patch offers many premium caps to choose from (sold separately), or you can attach your patch to a jacket or vest. All patches are designed with a built-in hook backing, so they can be secured easily to any loop surface. We do not use VELCRO brand fasteners, but Pull Patch products are compatible with all VELCRO loop fasteners..
  • YOUR PERFECT MATCH PATCH – Pull Patch offers 1000’s of designs to choose from with fun sayings and multiple color choices. Our proprietary printing process allows for high resolution printing, providing exquisite detail which is embedded into the patch fabric. Designs will never fade, even after washing (yes, they’re washable!), and artwork will never scratch off..
  • THE PULL PATCH ‘CATCH’ -- Compare our hand printed patches to embroidered, woven, and PVC patches – and you’ll see that Pull Patch products are far superior in quality. Our patches have a low profile that won’t stick out like other morale patches, which allow those patches to be sewn onto garments. All of our patches have a merrow edge (enclosed border) which offers extra durab....
Check Stock

1789 2nd Second Amendment Homeland Security Womens Pink Embroidered Patch

  • 2nd Amendment Rocker Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your ....
Check Stock

Chicago City Flag Patch - 3x2 inch. Embroidered Iron on Patch

  • Chicago City Flag Patch measures 3x2 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch your leath....
Check Stock

Game Over Marriage Patch Medium - 3x3.75 inch. Embroidered Iron on Patch

  • Game Over Marriage Patch Medium measures 3x3.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorch....
Check Stock

Sing 2

  • CONVENIENT TO USE -Because this air mattress patch kit has the high-strong self adhesive backing, you can repair the holes by the steps: 1) keep the holes dry and clean without dust.
  • 2) Cut the pool patch repair kit into needed shape and size.
  • 3) Near the leaks and press TPU repair tape on the hole for several minutes. Then the pool patches can achieve fast, instant repair result. Tips: Clean the area where the repair is necessary, and make sure there has no grime, or the patch may not stick..
  • DURABLR & SAFETY - Since this swimming pool patch repair kit is made of high safety regulations and standards TPU material, the industrial high-strength pool hole patches can be easily and safely used on any plastic, vinyl or vinyl-coated products, e.g., swimming pool, inflatable air mattress, overshoes, plastic tube air bed, airbed, air floats. With high-bond adhesive, the patch for air mattress repair can serve you for a long time use under water after repairing pool inflatables, floating..
  • TRACKLESS & VISCOSITY - This transparent inflatable pool repairing patches has high viscosity and elasticity with no messy liquid adhesives. Therefore, one can fix the holes ....
Check Stock

Machine Gun Bunny Rabbit Patch - 3.1x3.75 inch. Embroidered Iron on Patch

  • Machine Gun Bunny Rabbit Patch measures 3.1x3.75 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this will scorc....
Check Stock

Respect is Earned Loyalty is Returned Patch - 4x1.5 inch - Embroidered Iron on Patch

  • Respect is Earned Loyalty is Returned Patch measures 4x1.5 inch..
  • This is an iron on patch with Plastic iron on backing. To Iron on the patch set your iron to yield a temperature between 260-280 degrees Fahrenheit. If you are using a heat press 12 seconds is sufficient. If you are using a household iron 30 seconds of applied pressure will be enough. We recommend a frying pan thermometer to get your iron to the correct temperature. Set your iron on top of your clothing without the patch with the thermometer probe sandwiched between iron and your clothing..
  • Set your iron to highest setting. Wait till the temperature reaches 280 degrees Fahrenheit then unplug your iron. The temperature will continue to rise a little more. Once it starts to drop and reaches 280 degrees move your iron, do not lift iron as this will dissipate heat too quickly. Place your patch and put iron over the patch and press hard for 30 seconds. This will best ensure that you are at the correct temperature which is essential for proper adhering. Do not iron on patches to leather.
  • This patch has embroidered and laser cut borders, it can be sewn on to clothing. You can sew the patches on to any material. We recommend sewing patches on to leather. Do not iron on patches to leather as this ....
Check Stock