Top Polyimide Film Silicone Tapes

3 Pack High Temp Tapes - Viaky 20mmx65.6ft Heat High Temperature Resistant Sublimation Tape, Polyimide Film Self Adhesive Tawny Tape for Electric Task, 3D Printers, Solder, Painting and Packing Fixing

  • 【Package Include】3 Pack high temp tapes in tawny color. Tape width 20mm(0.8in), length 20m(65.6ft)..
  • 【Good Quality】This high temp tape made of polyimide, the surface of polymers film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range..
  • 【Easy To Use】Approx heat resistance: long-term temperature resistance 250°C/482°F, short-term temperature resistance 280°C/536°F, strong self-adhesive is easy to stick, no residue after peeling..
  • 【High Performance】The high temp tape is superior resistant to UV, high temperature, acids, alkalis, oil, moisture and abrasion..
  • 【Multi-Uses】Perfect for all of your needs including masking circuit boards, soldering ,electrical insulation and splicing wires. It is also extensive use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry and more..
Check Stock

Sublimation Tape，Heat Resistant Tape, Kapton Tape for Masking, 3/8\ x 108ft，2 Rolls，Soldering, Protecting Circuit Board, Cellphone Data line and Battery

  • Heat transfer tape — MYJOR heat resistant tape made from durable polyimide film and silicone.
  • High temperature kapton tape — Temperature range from Long-term temperature 500 ℉(260℃) to Short-term temperature 536 ℉(280℃).
  • Heat tape for heat press — Applications for 3D Printing, masking circuit boards, soldering ,electrical insulation and splicing wires.
  • Heat press tape — Easy to use，Peel away easily and quickly by hand, there is no residue on the surface.
  • Size of capton tape — 3/8 in x 108 ft per roll, 2 rolls. Any issues please feel free to contact us.
Check Stock

LLPT Window Weather Sealing Tape 2” x 108 Ft Strong Adhesive Ultra High Performance Weather Resistant Tape for Window Draft Isolation Surface Protection Transparent (WWT208)

  • DIY repair on window, room, tents and other items that you need an ultra thin film for waterproof and airtight repair..
  • MATERIAL：LLPT weather sealing tape coming with 2 colors, transparent and clear blue. The pre-mixed UV stabilizer in film carrier is providing good resistance for yellowing and aging. The silicone adhesive layer is pressure sensitive, removable without any residue and supreme cold wind sealing low to -22°C..
  • SIMPLE USE: LLPT weather film sealing tape is easy to be applied. Clean the surfaces and wait until it’s dry.
  • stick one end to object, use your palm or squeegee to press down the whole surface of tape until the tape is closely bonded on flat objects or stretch and coil around the objects to create a protection layer, no need other steps or any special pre-treatment during your application..
  • LLPT-TAPES: LLPT produces various tapes for industrial & commercial use with ideal sizes & thickness based on the desires of users. LLPT is dedicated to provide high utility on the product with competitive price with well protected package. Search on Amazon for other LLPT tapes ,like Butyl Tape, Gaffer Tape, Foam Tape, Double Sided Acrylic Tape, Nano Tape, Duct Tape and so on..
Check Stock

1 Mil Kapton Tape (Polyimide) - 1" x 36 yds

  • 1 Mil Polyimide Tape (Kapton) RoHS compliant.
  • 1 Mil Polyimide Tape is silicon adhesive protection leaves no residue..
  • 1 Mil Polyimide Tape is thin and conformable enabling masking of uneven surface.
  • 1 Mil Polyimide Tape shows excellent electrical insulation..
  • 1 Mil Polyimide Tape maintains high temperature resistance as high as 400F..
Check Stock

Heat Resistant Sublimation Tape,Heat Vinyl Press Tape for Heat Transfer,High Temperature Tape for Soldering,Electronics Masking,Protecting Circuit Board Multi,Heat Resist Up to 482℉(24mm x 98ft x 2)

  • Material:Heat resistant tape is a Polyimide Polymers Film tape with silicone adhesive and high temperature resistant adhesive.It's really indispensable when sublimating and the tape can do the job smoothly..
  • Maximum heat resistance: 482 ℉ (250℃)，comes off clean，easy peal and no residue.Works well in protecting electronic products, electric motor, solder, painting, packing fixing, printing PCB board.
  • Package included:High temp tape comes with 3 different size that is fit for your masking, soldering, electronic repair .The width of the tape in variety width, 4.7 Inch(4 rolls ),7 Inch （3 rolls ）and 9.4 Inch（2 rolls ）.it is 30 meters (98 feet) long..
  • Transfer tape for vinyl.This heat transfer tape keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press..
  • Easy use: Superior performance of the heat resistant. Strong silicone adhesive is easy to stick and no residue after peeling off..
Check Stock

Hxtape Multi Size Choices High Temperature Kapton Tape,Polyimide Film Tape for Masking,3D Printing,Electric Task,Soldering,1/4 inch,1/2 inch,3/4 inch,1 inch, 36yds/roll, Pack of 4

  • Heat resistant tape ,made from polyimide film with high temperature resistant silicone adhesive.
  • The highest temperature up to 662 ℉（350℃), Long-term temperature: 536 ℉（280℃）& Short-term temperature: 662 ℉（350℃）.
  • Excellent heat & solvent resistance Minimal shrinkage after baking and clean removal.
  • Used on insulating circuit boards, etching, automotive sensor and manifolds,fiber optics cable, high temperature powder coating and semiconductor manufacturing..
  • Size:1/4″(6mm) x 36yds, 1/2″(12mm) x 36yds, 3/4″(19mm) x 36yds, 1″(25mm) x 36yds, total 4 rolls. If you are not satisfied, we will refund 100% of your purchase..
Check Stock

APT, 1 mil Thick Polyimide Adhesive Tape, HighTemperature and Heat Tape, for Masking, Soldering, Electrical, 3D Printer Application. (2\x 36 yds)

  • 【Wide Area of Applications】-Used for electronic products, soldering, circuit boards, manufacturing, fiber optics cable, insulating circuit boards, ground barrier & insulation for coils, 3D printing, high temperature sublimation powder coating, etc..
  • 【High Temperature】- APT Polyimide tape has highly excellent heat & solvent resistance. Minimal shrinkage after baking and clean removal, and also shows the great electrical insulation. It maintain high-temperature resistance as high as 400F (260℃)..
  • 【Clean Removal, No Residue】- Our high temperature tape can withstand up to 400F (260℃) degrees. Remove cleanly, leaves no residue..
  • 【No Shrinking, Curling, Or Lifter Edges】- Made with high temperature silicone adhesive and premium film. Our tape resists curling, shrinking, and lifted edges every time..
  • 【Trusted Every Where】- Our tape do not contain any harmful chemicals, and complies with RoHs & Reach requirements. It is rigorously tested and meets American Society for Testing and Materials D-5213 standard, for high performance every time..
Check Stock

Mishimoto - MMGRT-235 Heat Defense Heat Protective Tape - 2\ x 35' Roll Metallic Gold

  • Constructed of highly reflective metalized polyimide film.
  • Reflects heat and protects sensitive engine components from high temperatures.
  • Temperature resistance: 675 degree Fahrenheit continuous.
Check Stock

Dekoni Audio Blue Fostex/Dekoni Audiophile HiFi Planar Magnetic Headphone

  • The only T50RP MK3 Mod sanctioned by Fostex.
  • Refined Fostex proprietary Regular Phase (RP) diaphragm driver using copper foil etched polyimide film and powerful neodymium magnet.
  • Maximum input level of 3000mW to comply with various professional uses.
  • Dekoni Hybrid ear pads provide comfort and a warmer, smoother sound.
Check Stock

High Temperature Kapton Tape, Professional for Protecting CPU, PCB Circuit Board…

  • MYJOR heat transfer tape is made from polyimide film, High tensile strength.
  • High temp tape that is fit for SMT high temperature protection, good stability.
  • Heat tape for heat press tape work well in protecting electronic products, for 3D Printing, Soldering, Masking, etc.
  • Temperature range of heat resistant tape from Long-term temperature 500 ℉(260℃) to Short-term temperature 536 ℉(280℃).
Check Stock

6 Roll Self Fusing Silicone Tape Rubber Flame Retardant High Temperature PVC Tape for Leaks Seal Pipes Repair Tools Electrical Wires Wrap Indoor Outdoor, 5 Feet

  • No residue: these self-adhesive silicone plumbers tapes can stick quickly and tightly on the items, and will leave no residue after removal.
  • They are easy to bind temporarily or for a long time, and form a complete seal without air, dust proof and waterproof.
  • Wide application: you will get 6 roll 1" x 5' self fusing tapes, these silicone tapes can be applied as repair tapes to help seal hoses, water pipelines, and more home, garden or car emergency repairs.
  • Also suitable for using as insulation tapes for wires or hand tools, and factory maintenance works..
  • Safe and tensile resistant: the tensile strength grade of leak seal tapes is over 710 PSI, and the working temperature is -60 degrees Celsius to 260 degrees Celsius, insulated to 400V/mil, which are suitable for repairing and wrapping most tools.
  • Reliable quality: these self fusing tapes are made of quality silicone materials, no adhesive layers, safe and reliable, corrosion resistant, heat resistant, humidity resistant, oxygen resistant, ozone resistant, insulated, pressure resistant, and have good performance for water and airtight sealing.
  • Flexible and stretchable: these soft silicone sealing tapes have the characteristics of flexibility and stretching, can fit well with even small pipe diameters an....
Check Stock

LLPT Caulk Tape Clear 1.2 Inch x 33 Feet Extra Thickness Waterproof Adhesive for Sink Shower Bathtub Toilet Lavabo Kitchen (CT123)

  • ...aling drafts such as underneath window sills, kitchen and metal enclosures for weatherproof. This tape provides ideal sealing solution and maintains an effective sealing over existing seams, joints or penetrations with no curing time..
  • CONSTRUCTION: The adhesive (Single Sided Adhesive) layer is super strong based on silicone carrier and providing instant bonding and sealing, coated with silicone strong adhesive to withstand peel-strength up to 30N/IN and pull-strength up to 88N/IN.
  • the adhesive layer is extremely strong after 72 hours, which will damage the painting and coating on objects that WE DO NOT RECOMMEND to remove the tape after 72 hours for painted or coated objects..
  • PRODUCT FEATURE: Pressure sensitive adhesive and great initial adhension.
  • resist to high pressure water and shocks absorption with excellent sealing quality and good durability to protect gaps.
  • a sensible pick for sealing applications in outdoor and indoor areas that are constantly exposed to water and humidity. It can be applied to any weather types, smooth or rough surfaces for long-term joint sealing and it can withstand extremely temperature from cold to hot..
  • INSTALLATION: Easy installation on this tape other than liquid sealant without any waiting time.
Check Stock