Top Polymer based Adhesive

Frogtape 1358463 .94\ X 60 Yards Green Multi-Surface Painter's Tape

  • ...any other painting tape, it is recommended that you remove and reapply FrogTape in between coats of paint. If not, you run the risk of the layers of the paint becoming too thick and bridging over the tape. This can cause the fresh paint to tear when you remove the tape..
  • Carrier/Backing: fine structured crepe paper. Adhesive: rubber-based. Thickness: 5.6 mils (carrier, adhesive). Adhesion: 32 ounces per inch (to stainless steel test panel). Tensile Strength: 27 pounds per inch (longitudinal). Service/Operating Temperature: 50F to 200F. Elongation: 8%. Core: 3-inch diameter..
Check Stock

Kevlar Repair KIT

  • 2 x evo stik stick serious stuff ultra grab adhesive glue C20 290ml cartridge 663770.
  • Suitable for use on wood metal brick glass plaster plastics ceramics & almost any other material.
  • MS Polymer technology. Coverage approx 14.5m using a 5mm bead.
  • The strongest waterproof grab adhesive you can buy! It will stick almost anything to anything.
  • solvent free, suitable for interior & exterior use.
Check Stock

CPU-Cooler Thermal Grizzly Carbonaut Wärmeleitpad - 38 × 38 × 0,2 mm

  • Those thermal pads are made from a carbon-based polymer with nanoparticles.
  • They have a high thermal conductivity of 62.5 W/mk.
  • The non-adhesive and flexible carbon thermal padding can be used repeatedly and, unlike pastes, does not dry out.
  • The thermal conductive pad meets the expectations of gamers and IT enthusiasts alike, who are primarily looking for a high quality product from Thermal Grizzly.
  • The thermal pad material is virtually non-degradable, so its properties are solid and its lifespan almost unlimited (rumored to be up to 15 years).
  • Suitable for CPU cooling, GPU cooling, and any application that requires the use of pads instead of thermally conductive pastes.
  • Carbonaut is an electrical conductor - avoid contact between thermal pad and transistors or transformers.
Check Stock

Sculpey Artist Set: 1 Fl Oz Gloss Glaze, 2 Fl Oz Bake and Bond Bakeable Adhesive for Oven-Bake Clay, 2 Fl Oz Translucent Liquid Bakeable Clay - Pack of 3

  • 3-PACK ARTIST SET - This Artist Set includes 1 x Gloss Glaze, 1 x Bake and Bond Bakeable Adhesive for Oven-bake Clay, and 1 x Translucent Liquid Bakeable Clay..
  • 1 x GLOSS GLAZE - The gloss glaze adds a durable finish to baked clay items and is compatible with acrylic-water based finishes..
  • 1 x BAKE AND BOND - This bake and bond bakeable adhesive for oven-bake clay forms a strong bond between two polymer clay pieces. It will stick two pieces together even with only a little pressure without having the details and shapes distorted..
  • 1 x TRANSLUCENT LIQUID BAKEABLE CLAY - This transparent bakeable clay makes added designs perfectly visible. Can be used as coating for a resin-like finish..
  • GREAT FOR ALL CLAY ARTISTS - The Sculpey Artist Set is great for all clay artists, beginners and advanced users alike. Each bottle is marked with a manufacturing date, there is no expiration date for these products..
Check Stock

3M Gripping Material TB641, Black, 1 in x 15 ft

  • Soft, adhesive backed gripping material designed to stick on contact.
  • Acrylic pressure sensitive adhesive designed to bond to a wide variety of surfaces.
  • Soft, thermoplastic elastomer gripping polymer provides high friction properties with increased cushioning, comfort, flexibility and softness.
  • When mated, delivers high coefficient of friction properties, even in wet conditions.
  • Designed to provide slip resistance and easy-release properties.
Check Stock

Pro-Grade, Slim, 1\x .6\ Cable Tie Mounts With Screws 100 Pack. High Strength, Black Zip Tie Bases For Wire Management. Permanently Anchor To Wall, Desk or Baseboard. Run Cords at Your Home or Office

  • SCREWS=STRONGER HOLD THAN ADHESIVE. Ensure your base stays where you put it with included screws. No more wire bundles and mounts falling after days of use..
  • TOP QUALITY MATERIALS=ONLY NEED TO DO THE JOB ONCE. Our premium, polymer cable tie bases provide a strong anchor for your cables or décor so you can have a quick and painless installation that will stay put..
  • LIFETIME MONEY BACK GUARANTEE! We stand behind all of our products. If you’re not 100% COMPLETELY SATISFIED, just send us an email, and we promise to make it right!.
  • KNOW YOU HAVE THE RIGHT SIZE SCREW. The included screws are made specifically to fit these bases. No need to search through your toolbox or go out and buy screws hoping they fit. We guarantee these will..
  • QUICK AND SLEEK CABLE MANAGEMENT. Bundle your cables and zip tie them to these anchored bases for a seamless and efficient installation that looks tidy. No more cable "spaghetti" mess!.
Check Stock

NODDWAY Holographic Powder 0.07oz/2g, 10 Micron Chrome Fine Powder for Epoxy Resin/Nails, Rainbow Holographic Powder Mirror Nail Pigment Powder

  • 【A Little Go a Long Way】:Pick out the most popular fine chrome powder - a micron grade of 10μm, the net weight is 2g, just a little can go a long way.The 10 Micron is fine and easy to apply to the nail, with the vibrant holo effect and well adhesive performance..
  • 【Saturated Chrome Pigment Powder】: It covers really well with a blue/teal base, and all a gorgeous rainbow shifting pigment that glimmers a mirror-like silver tone to a myriad of colors depending on the angle viewed. Perfect combination of the vibrant holo effect and well adhesive performance..
  • 【Holographic Powder For Resin/Nails]: Dusted into silicone molds backed with black resin to achieve the most professional and beautiful results possible with your resin crafts! The effect as the same way chrome..
  • 【Widely Application】: NODDWAY Holographic mica powder is perfect for Epoxy Resin Crafts DIY, Tumblers,Nail Art, Candle Making, Bath Bombs, Soap Colorant, Slime, Polymer Clay. 100% safety and easy to wash. These fine powders also work in lots of low temp artistic mediums..
  • 【100% QUALITY ASSURANCE】: NODDWAY Holographic Powder provides 30-days money-back. If the chrome powder you received was damaged due to transportation, just contact us, we will provide a full refund or free exc....
Check Stock

8 Pack Sticky Adhesive Compatible with Socket Mount Base, PKYAA Double-Sided Replacement Tape for Car Magnetic Phone Holder, 4 Pack Sticker Pads for Collapsible Grip & Stand Base

  • 【PKYAA Very High Bond Sticky Adhesive Replacement Superior Performance】PKYAA offer original Very High Bond super-adhesive is 40% stronger than ordinary black sticky, high temperature resistant and low temperature resistant. PKYAA sticky adhesive is extremely compatible with the base and back..
  • 【8 Pcs 0.91" Very High Bond Adhesive Compatible with Socket Mounts Base 】The 23mm(0.91") double side sticky adhesive can be used on the bottom of Socket car mounts, magnetic car mounts, instrument panel cam holders, gps holders and vent mount to maintain stability even on rough roads..
  • 【4 Pcs 1.38" Very High Bond Adhesive Compatible with Socket Base】PKYAA offers 4Pcs Very High Bond double side sticky adhesive compatible with Socket Base, the adhesive is 35mm(1.38") and fit out-stand base perfectly..
  • 【Easy to Use】Please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your car dashboard..
  • 【Durability】These Double-sided stickers roll with pressure sensitive adhesive bonds almost i....
Check Stock

Lizard Skins DSP Ultra 1.1mm Bat Grip – Next-Gen Durasoft Polymer Baseball & Softball Bat Tape (Diamond White)

  • 1.1mm Thickness - Designed to be used on any bat type with an excellent all-around grip that balances cushion with the ideal amount of thickness.
  • Game-Changing Tackiness and Durability with our new Next-Gen Durasoft Polymer and texture - With One Touch Our Polymer Stands Out, Lizard Skins leads the hand to grip interface because of our patented polymer.
  • New oval pattern with added multi-directional ridges for better performance and a reformulated polymer for enhanced feel and durability New Premium Adhesive Back for easy install with new installation call-outs on the grip - Touch It. Feel It. Love It..
  • The 1.1mm thickness is ideal for composite or aluminum bats but can be used as a thicker option on wood bats. Providing excellent all-around grip, the 1.1mm grip is highly versatile and is perfect for transitioning from composite to wood. This grip the preferred by hitters with average hand size, helping to improve tack and offers moderate vibration reduction.
  • Lizard Skins Bat Grips are the official Bat Grip of Major League Baseball and are used by some of the game’s best athletes Designed to fit any and all Baseball & Softball Bats, including wood, composite, and aluminum.
Check Stock

Lizard Skins DSP Ultra 1.1mm Bat Grip – Next-Gen Durasoft Polymer Baseball & Softball Bat Tape (Polar Blue)

  • 1.1mm Thickness - Designed to be used on any bat type with an excellent all-around grip that balances cushion with the ideal amount of thickness.
  • Game-Changing Tackiness and Durability with our new Next-Gen Durasoft Polymer and texture - With One Touch Our Polymer Stands Out, Lizard Skins leads the hand to grip interface because of our patented polymer.
  • New oval pattern with added multi-directional ridges for better performance and a reformulated polymer for enhanced feel and durability New Premium Adhesive Back for easy install with new installation call-outs on the grip - Touch It. Feel It. Love It..
  • The 1.1mm thickness is ideal for composite or aluminum bats but can be used as a thicker option on wood bats. Providing excellent all-around grip, the 1.1mm grip is highly versatile and is perfect for transitioning from composite to wood. This grip the preferred by hitters with average hand size, helping to improve tack and offers moderate vibration reduction.
  • Lizard Skins Bat Grips are the official Bat Grip of Major League Baseball and are used by some of the game’s best athletes Designed to fit any and all Baseball & Softball Bats, including wood, composite, and aluminum.
Check Stock

Lizard Skins DSP Ultra 1.1mm Bat Grip – Next-Gen Durasoft Polymer Baseball & Softball Bat Tape (Mint Green)

  • 1.1mm Thickness - Designed to be used on any bat type with an excellent all-around grip that balances cushion with the ideal amount of thickness.
  • Game-Changing Tackiness and Durability with our new Next-Gen Durasoft Polymer and texture - With One Touch Our Polymer Stands Out, Lizard Skins leads the hand to grip interface because of our patented polymer.
  • New oval pattern with added multi-directional ridges for better performance and a reformulated polymer for enhanced feel and durability New Premium Adhesive Back for easy install with new installation call-outs on the grip - Touch It. Feel It. Love It..
  • The 1.1mm thickness is ideal for composite or aluminum bats but can be used as a thicker option on wood bats. Providing excellent all-around grip, the 1.1mm grip is highly versatile and is perfect for transitioning from composite to wood. This grip the preferred by hitters with average hand size, helping to improve tack and offers moderate vibration reduction.
  • Lizard Skins Bat Grips are the official Bat Grip of Major League Baseball and are used by some of the game’s best athletes Designed to fit any and all Baseball & Softball Bats, including wood, composite, and aluminum.
Check Stock

Lizard Skins DSP Ultra 1.1mm Bat Grip – Next-Gen Durasoft Polymer Baseball & Softball Bat Tape Jet Black

  • 1.1mm Thickness - Designed to be used on any bat type with an excellent all-around grip that balances cushion with the ideal amount of thickness.
  • Game-Changing Tackiness and Durability with our new Next-Gen Durasoft Polymer and texture - With One Touch Our Polymer Stands Out, Lizard Skins leads the hand to grip interface because of our patented polymer.
  • New oval pattern with added multi-directional ridges for better performance and a reformulated polymer for enhanced feel and durability New Premium Adhesive Back for easy install with new installation call-outs on the grip - Touch It. Feel It. Love It..
  • The 1.1mm thickness is ideal for composite or aluminum bats but can be used as a thicker option on wood bats. Providing excellent all-around grip, the 1.1mm grip is highly versatile and is perfect for transitioning from composite to wood. This grip the preferred by hitters with average hand size, helping to improve tack and offers moderate vibration reduction.
  • Lizard Skins Bat Grips are the official Bat Grip of Major League Baseball and are used by some of the game’s best athletes Designed to fit any and all Baseball & Softball Bats, including wood, composite, and aluminum.
Check Stock