Top Porcelain Hole Saw

Diamond Hole Saw 60mm 2-3/8 inch with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone

  • Diamond drill bit is diameter of 60mm 2-3/8 inch.the cutting depth is 1.06 inch..
  • The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
  • Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
  • Beautiful appearance,excellent antirust function by chrome plating treatment..
  • Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • We suggest using water to cool the diamond drill bit to prevent overheating..
Check Stock

Diamond Hole Saw with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone (110mm 4.33inch)

  • Diamond drill bit is diameter of 110mm 4.33inch.the cutting depth is 1.06 inch..
  • The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
  • Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
  • Beautiful appearance,excellent antirust function by chrome plating treatment..
  • Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • We suggest using water to cool the diamond drill bit to prevent overheating..
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • ... In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To Cool The Material, This Will Also Pevent Heat Build Up In The Diamond Bits..
  • Use As Granite Drill Bit With Drill Guide, With The Diamond Drill Bits Ceramic Glass Porcelain And Granite Can Be Drilled Through As Long As The Bits Are Kept Cool. Do Not Spray Water Onto Side Of Porcelain Drill Bit Set As That On....
Check Stock

1 1/4 Diamond Hole Saw Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block 3/8 inch Standard Shank Rotary Tools 1-1/4 inch Diamond Drill Bit

  • Industrial heavy duty, commercial quality, durable core drill bits for concrete, exactly 1-1/4 inches diameter.
  • Concrete hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 1-1/4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain, stucco, slab, slate.
  • 1-1/4 inch concrete core saw hammer drill bits for concrete.
  • Concrete hammer core bit fits your standard drill..
Check Stock

2 inch Diamond Hole Saw for Concrete Masonry Cinder Blocks Stucco Granite Quartz Marble Core Drill Bit Heavy Duty Dry or Wet Drilling Standard Shank Extra Deep Depth of Cut

  • Commercial quality, durable 2 inch core drill bits for concrete, exactly 2 inches diameter.
  • 2 inch Diamond hole saw with 2 in depth of cut and standard 3/8 inch shank for standard cordless or electric drill.
  • 2 in concrete hole saw dry or wet use drilling holes in stucco, concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • 2 inch concrete core saw diamond drill bits for concrete.
  • Concrete core bit fits your standard drill with no adapter needed.
Check Stock

5-1/2 Inch Diamond Hole Saw Drill Bit Ceramic Porcelain Glass Granite Marble Tile Tiling 5 1/2 Inches in 5 1 2 inch

  • Diamond Coated Hole Saw Drilling Holesaw Tool 5 1/2" - Larger Than 5 Inches.
  • EASILY Cuts Through Ceramic and Porcelain Tile - Glass, Marble, Granite, Quartz - USE WATER TO COOL.
  • Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation.
  • Drills 1 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required.
  • Cylindrical Shank 3/8" - No Need for Adapters or Arbor.
Check Stock

QEP 1-3/8 in. Diamond Hole Saw with Water Delivery System

  • For cutting 1-3/8 in. holes in the hardest porcelain, ceramic, marble and granite.
  • Metal saw with diamond grit edge for long lasting use, limited wear, faster cuts, less dust and less chipping.
  • Water cooling system keeps hole saw cool for a longer life.
  • Convenient, single piece water delivery system.
  • Includes 6 adhesive strips, water cooling cup and 1-3/8 in. dia x 3" tall drill bit.
Check Stock

JIECHENG Brazed Diamond 1-1/4 inch Hole Saw with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone,Dry Drilling 32mm

  • Brazed diamond hole saw 1-1/4 inch (32mm),the cutting depth is 35mm 1.38 inch.
  • Dry drilling is ok for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
  • Special design with a center drill bit for positioning function, which is convenient to guide the hole saw.
  • Beautiful appearance,excellent antirust function.good quality of diamond..
Check Stock

2 1/4\ Diamond Hole Saw for Shower Diverter Valve 2 1/4\ Waste Pipe Hole Saw Guide Holds in Place Large Diamond Particle Professional Diamond Hole Saw for Porcelain Tile Ceramic Tile Glass Tile 57mm

  • 2 1/4" Diamond Hole Saw 57mm PROFESSIONAL QUALITY DIAMOND Drill Bit Bigger Diamond Grit Pieces Cut Better Keep Cool.
  • DIAMOND DRILL CORE GUIDE INC. Just Tape Hold In Place No More Fingers Crossed It Doesnt Move Or Jump.
  • DIAMOND HOLE SAW BITS Cut Porcelain Granite Countertops Ceramic Glass Tile Blocks And Wine Bottles.
  • DIAMOND CORE BITS FIT ANY STANDARD DRILL CHUCK Using Hammer Drill Or Not Keeping Cool Will Wear Fast.
  • TRADE SECRET Remove From Hole Every 15 Secs Dip In Water Get Water In Hole Will Stop Material Crack.
Check Stock

1 1/8\ Diamond Hole Saw For Faucet Sink Hole Guide Holds Holesaw In Place When Drilling, High Quality Multi Use Diamond Grit Hole Saw For Porcelain Granite Ceramic Glass Tile Glass Bottles Blocks 29mm

  • 1 1/8" Diamond Hole Saw 29mm PROFESSIONAL QUALITY DIAMOND Drill Bit Bigger Diamond Grit Pieces Cut Better Keep Cool.
  • DIAMOND DRILL CORE GUIDE INC. Just Tape Hold In Place No More Fingers Crossed It Doesnt Move Or Jump.
  • DIAMOND HOLE SAW BITS Cut Porcelain Granite Countertops Ceramic Glass Tile Blocks And Wine Bottles.
  • DIAMOND CORE BITS FIT ANY STANDARD DRILL CHUCK Using Hammer Drill Or Not Keeping Cool Will Wear Fast.
  • TRADE SECRET Remove From Hole Every 15 Secs Dip In Water Get Water In Hole Will Stop Material Crack.
Check Stock

DKIBBITH 1 Inch Dry Diamond Core Drill Bits, 25mm Tile Vacuum Brazed Angle Grinder Hole Saw for Porcelain Ceramic Granite Brick Concrete with 5/8-11 Thread to 3/8” Hex Shank Adapter, Black

  • 1″ Dry Diamond Core Drill Bit – Great tool to add to your collection for cutting holes for split AC units plumbing, shower/tub grab bars, shower plumbing, faucet and more projects.
  • Work with Angle Grinders and Electric Drills – Package including a 1 Inch Diamond Hole Saw with 5/8-11 female thread for most Angle Grinders, as well as an arbor to 3/8” Hex Drill Shank which can fit in Power Drills..
  • Excellent Hole Saw for Rough Materials – Fast clean cut through stucco, bricks, concrete, ceramic tile, porcelain, tabby stone, brick, mortar, granite, marble, quartz, etc. Both Dry and Wet will do, and vac will be helpful for dry drilling.
  • Sharp and Durable – Vacuum Brazed Diamond Core Bit chews through materials with ease and minimal wear.
  • stays sharp longer than other masonry hole saw bits as long as taken good care to cool sufficiently.
  • User Tips – When starting the hole, tilt the high-speed bit at a 45-degree angle to touch the surface, then slowly move the drill back upright and let the tool do the cutting, you will have minimal bit walking and create smooth.
Check Stock

FINGLEE DT Super Thin Diamond Saw Blade for Porcelain Tile Ceramic,Diamond Cutting Blade,with 7/8\ 4/5\ 5/8\ Arbor (4-1/2inch 1pc)

  • Diameter 4.5"(115 mm),inner hole 7/8"(22.23 mm), with ring adapters to 4/5"(20 mm) and 5/8"(16 mm)..
  • Super thin and unique X-style teeth for high performance,very tough and durable..
  • Dry or wet use on cutting porcelain, ceramic, tile and more..
  • Suitable for an angle grinder, circular saw, masonry saw and gas cut-off saw..
  • Do not use for dangerous and hazardous projects..
Check Stock