Top Porcelain Tile Hole Saws

1 1/4 Inch (32mm) Diamond Hole Saw with Pilot Bit, 2 PCS DaduoRi 1.25 Inch Tile Tip Coated Hole Saw with Guiding Drill Bit in The Center for Glass, Porcelain Tile,Ceramics, Marble and Granite

  • 【2 PCS 1-1/4 inches Diameter Hole Saw 】Cutting Hole Diameter: 1-1/4" / 32mm.
  • 【With Spear Shaped Center Pilot Drill Bits, Easy to Get Started 】DaduoRi hole saw with center guiding drill bit make you more easy to locate the center to start drilling on a smooth tile surface. No need to spend time making extra jig guides..
  • 【Triangular Shank Design, Firm Grip by drills】Compared with other hole saws, DaduoRi diamond coated hole saws is designed with a triangular shank, which can better work with the drill..
  • 【Thickened Diamond Coating, More Wear-Resistant 】DaduoRi team attached the importance of diamond tip of the glass drill bit, not only using superior diamonds, but also thickening the diamond coating to make this pilot hole drill bit more wear-resistant and high-temperature resistant..
  • 【Solid Steel Body, no welding deformation 】Made by High-quality 45-gauge steel.The shaft is centered and does not wobble during use..
  • Fast drilling on glass, porcelain tiles, granite, ceramic, quart, flower pot, light stone and fiberglass. Can't use for Metal and Concrete..
Check Stock

Lackmond Beast Pro 7 Wet/Dry Porcelain Turbo Mesh Saw Blade - 7 Tile Cutting Tool with Quick Cooling Mesh Rim & 7/8 - 20mm - 5/8 Arbor - BPM7

  • TURBO MESH CONFIGURATION – The unique turbo mesh rim significantly aids in cooling the blade, resulting in longer blade life and extremely clean/....
  • ASSORTED TILE APPLICATIONS – Designed to be used on porcelain tile, ceramic tile, marble, granite and other natural stone.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • EQUIPMENT – For use on Tile saws, circular saws, and hand grinders.
  • WET OR DRY SAW BLADE – 4"-7” BLADES can be used wet or dry. 10” blade is for wet only.
Check Stock

Lackmond Beast Pro 4.5 Wet/Dry Porcelain Turbo Mesh Saw Blade - 4-1/2 Tile Cutting Tool with Quick Cooling Mesh Rim & 7/8 - 20mm - 5/8 Arbor - BPM4.5

  • TURBO MESH CONFIGURATION – The unique turbo mesh rim significantly aids in cooling the blade, resulting in longer blade life and extremely clean/....
  • ASSORTED TILE APPLICATIONS – Designed to be used on porcelain tile, ceramic tile, marble, granite and other natural stone.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
  • EQUIPMENT – For use on Tile saws, circular saws, and hand grinders.
  • WET OR DRY SAW BLADE – 4"-7” BLADES can be used wet or dry. 10” blade is for wet only.
Check Stock

Delta Diamond Piranha Premium 10 Inch Tile Saw Diamond Blade, 5/8\ Arbor, Continuous Rim, Wet Cutting Porcelain Tile, Ceramic Tile, Stone (10\)

  • PREMIUM TILE SAW BLADE - Made with higher levels of diamond compared to standard blades to provide excellent cutting and performance on a wide range of materials. Use on porcelain tile, ceramic tile, granite, marble, slate, terrazzo, or any similar material..
  • MINIMAL CHIPPING - Thin .090 cutting rim allows for the best combination of cutting speed and blade life while producing a first-class cut!.
  • EXTRA TALL RIM - 11MM tall to maximize blade life and prevent downtime during blade changes..
  • SPECIFICATIONS - 10" diameter X .090 wide X 5/8" arbor. Will fit any tile saw with 5/8" arbor shaft. Max safe rpm is 6,115..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Blazer Pro Diamond Hole Saw Size 1 1/4\ for Porcelain Tile, Ceramic Tile, Marble, Granite, Glass, Terrazzo, Quartz and Other Hard Surfaces, Metal Bonded Bits for Longer Life (1-1/4\)

  • Blazer diamond hole saws for drilling holes in hard porcelain tile, glass tile, ceramic tile, marble, granite, slate, limestone, terrazzo, quartz and any similar materials..
  • Produce clean and accurate holes in minutes with little or no chipping!.
  • Size is 1-1/4" and has a pilot bit in the center.
  • Because this is a top-quality US made product it is backed with a 100% lifetime warranty that also includes free return shipping. If it ever breaks, warps, cracks or shows any sign of a material defect (being used for its intended purpose), or if the bond between the diamond segment and the steel core becomes separated at any time, it will be replaced free of charge!.
Check Stock

Dremel US540-01 Ultra-Saw 3.5-Inch Tile Diamond Blade , White

  • 3.5” premium diamond coated cutting wheel for cutting wall tile & floor tile..
  • Cuts most tile and masonry materials with ease and precision..
  • Ability to also cut porcelain, slate, stone, cement backer board..
  • Compatible with all Dremel corded and cordless Ultra Saws..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ... Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ... Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

QEP 6-1008BW Black Widow 10\ Wet Tile Saw Micro-Segmented Diamond Blade for Porcelain, Marble, Granite & Ceramic Tile, 5/8\ Arbor, Wet Cutting, 6115 Maximum Rpm

  • Porcelain certified diamond blade cuts porcelain, marble, granite and ceramic tile.
  • High quality steel with 7 mm, diamond-coated high-rim for less chipping and a cleaner cut.
  • 5/8 in. Arbor fits most brands of wet tile saws.
  • Micro segments help cool the blade and prevent wobbling and chipping.
  • Ideal for high speed cutting of Hard masonry tile.
Check Stock

GoYonder 4.5 Inch Super Thin Diamond Saw Blade for Cutting Porcelain Tiles,Granite Marble Ceramics (4.5\)

  • Super thin porcelain saw blade with free chips for cutting,Match with hand-held machine.
  • Available for cutting porcelain,ceramic tile,granite, sandstone quartz ect. Cpsia Warning.
  • Size:115 x 10 x 1.2 x 22.23 mm,Thickness:1.2mm,Outer Diameter:115mm /4.5 inch.Suitable for most tile saws and hand-held angle grinders with a 7/8" or 5/8" Arbor..
Check Stock

1inch Dry Diamond Drill Bits, 25mm Diamond Hole Saws for Porcelain Granite Tiles Brick Concrete Work with Angle Grinders & Electric Drills

  • 1Inch Diamond Hole Saw for Tiles – Vacuum Brazed Diamond coat designed for clean cutting in all types of tiles including Ceramic, porcelain, marble, granite, glass, and natural stone.
  • Fit Most Tools – 25mm Dry Diamond Drill Bit can be used on most angle grinders (5/8-11 thread) directly, or High Speed powered drills with the 3/8” Hex Shank Adaptor (included).
  • Speed and Smooth Cutting – With a slotted to aid debris removal and cooling, you will get perfect holes with professional finish and minimum chip in a fast manner.
  • Applications – Diamond Hole Saws kit will save you time and money in jobs such as bathroom and kitchen tile fittings, stone countertop fitting..
  • User Tips – for accurate positioned hole, please place the high-speed drill at a 45-degree angle to start a position groove, then bring the drill up upright slowly and continue.
  • cool the bit enough to keep the diamond core drill bit sharp longer.
Check Stock

Super Thin Diamond Porcelain Saw Blade with X Teeth,BRSCHNITT 8 Inch (200mm) Diamond Cutting Disc with Reinforced Core Center for Dry/Wet Cutting Porcelain Tile Ceramic Marble Granite

  • ✔Size --8 inch (200mm),diamond height 10mm ,segment thickness 1.8mm ,Arbor 1"-7/8"-5/8"(25.4mm-22.23mm-16mm) , wet or dry cutting.
  • ✔High Performance --The reinforced core center helps to keep balance,unique X Mesh Rim design allows for less friction and more efficient heat dispersion for superior cutting performance.
  • ✔Wide Applications --A blade engineered for extremely smooth cutting of porcelain tile, ceramic tile, marble, granite,masonry and other natural stone.
  • ✔Fast And Smooth Cutting --Chip-free,offer faster cutting speed,guarantee a precise and smooth edge finish.
  • ✔Machine --For use on Tile saws, circular saws, and hand-held angle grinders.
Check Stock