Top Port Isolation

Directv [mrv] Swm 2 Way Splitter 2-2150 Mhz 1 Port Power Passing Weather Se [msplit2]

  • DIRECTV Approved for Multi Room Viewing (MRV).
  • Diode steered protection with grounding port provided.
Check Stock

Adafruit USB Isolator - 100mA Isolated Low/Full Speed USB [ADA2107]

  • USB ISOLATOR - The 3000 Vrms USB Isolator is a rugged, industrial-grade full / low speed USB isolator that provides high-voltage 3 kV isolation to....
  • FEATURES - Isolates and protects any USB devices from a USB Host. Electrical isolation up to 3000 Vrms upstream to downstream USB porT. USB1.1 low....
  • COMPATABILITY - With support on multiple OS platforms this makes ours very versatile. Supported OS platforms are Windows 7, 8 and 10 as well as Linux....
  • WHY Coolgear? Your Trusted Partner based in the USA, Providing Advanced Engineering, Highly Reliable and Superior Built Products to handle the most....
  • RoHS and RoHS2 compliant, CE, FCC approval.
Check Stock

DSLRKIT Gigabit 48V 30watt PoE Injector Adapter Power Over Ethernet 802.3at af 1000Mbps

  • Support international standard IEEE802.3 af & IEEE802.3at(30W).
  • POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af/at..
  • PD support 44V-57V voltage transmission, Automatically detects power supply from PSE power supply module.
  • Support the isolation circuit protection, can effectively protect electrical equipment.
  • Support the short circuit, overvoltage protection.
  • 12V 2A power output, easy to access Poe network for non-PoE terminal.
Check Stock

5v Relay Board Relay Module 1 Channel Opto-Isolated High or Low Level Trigger

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
  • 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
  • 【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
  • 【Wide Application】- These 5v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
  • 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..
Check Stock

MokerLink PoE Switch, 6 Port PoE Switch, and 5 Port Gigabit PoE Switch, 78W High Power, Support IEEE802.3af/at, Fanless Metal Plug & Play

  • 6 Port PoE Switch: 4 PoE+ Port, 2 uplink port, 100Mbps, 78w.
  • 5 Gigabit Port PoE Switch: 4 Gigabit PoE+ Port, 1 Gigabit uplink, 1000Mbps, 78w.
  • Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: Both switches support extended functions, port isolation, etc..
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty..
Check Stock

Youngneer 5v Relay Board Raspberry Arduino Relay Module 1 Channel Opto-Isolated High or Low Level Trigger

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 5V digital output from your microcontroller..
  • 【Main Specification】- Peak Load of NO Connector: AC125~250V/10A, DC28~30V/10A.
  • 【Adopted SMD Optocoupler Isolation】- The isolation circuit prevent damages to I / O port by relay switch current..
  • 【Wide Application】- These 5v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..
  • 【Humanization Design On Interfaces】- All interfaces can be directly wired out through the terminals..
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

MokerLink PoE Switch, 4 Port PoE+, and 8 Port PoE+, Support IEEE802.3af/at, Fanless Metal Plug & Play

  • Include POE-F042F (4 PoE+ Port, 2 Uplink, 100Mbps), and POE-F082GD ( 8 PoE+ Port 100Mbps, 2 Gigabit Uplink).
  • Built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W..
  • Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: Both switches support extended functions, port isolation, etc..
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty..
Check Stock

Antronix CMC2004H 4-Way- (5) Pack - Horizontal Splitter (4) -7db Ports 5-1002 MHz High Performance Profession Quality for Coax Cable TV & Internet Factory Sealed with Screws

  • Works great with: Comcast, Xfinity, RCN, Optimum, Wow, COX, Spectrum, and many more cable providers. Not recommended for Verizon, Direct TV, and Century Link..
  • -45 dBmV Spurious and harmonics after 5 surges of 6 kV ring wave with +55 dBmV return signal.
  • 6 kV ring with surge protection. Eclipse Contact Technology (ECT) F-Port. Digital Broadcast, HDTV and MoCa Ready.
  • Flat 1002 MHz bandwidth with minimal insertion loss. 35 dB return output return loss and 40 dB port-to-port return band isolation..
  • Capacitively coupled F ports. SCTE compliant F-ports with 1-inch port spacing. 100% welded back.
Check Stock

GCAN-207 RS232/485 to CAN Converter,Realize bidirectional Communication Between RS232 or RS485 Bus and CAN Bus

  • Standard serial port level, RS232 model or RS485 model can switch by software.
  • Conversion direction can be set to: CAN?? Serial, CAN?Serial, CAN?Serial.
  • Serial Bus baud rate range from 600bps to 115200bps.
  • CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS 11898 standards.
  • CAN-Bus baud rates range from 5Kbps to 1Mbps.
  • CAN-Bus interface with electrical isolation.
  • CAN-Bus isolation converter insulation voltage: DC 1500V.
  • Working temperature range from -40 to 85 °C.
Check Stock

TRENDnet 5-Port Gigabit PoE+ Switch, Camera DIP Switch extends PoE+ 200m (656 ft.), 60W PoE Budget, Black, TPE-TG51g

  • Extend PoE+ signal up to 200m (656 ft.) at 10Mbps.
  • DIP switch supports VLAN port isolation and QoS.
Check Stock