Top Positive rake Cutters

DocaPole 4 inch Roof Rake & Shrub Rake // Extension Pole Roof Rake Attachment // for Roof Raking and Detailed Shrub Raking Under Bushes and in Flower Beds // Flower Bed Rake // Small Rake Attachment

• ROOF AND SHRUB RAKE TIP – The ideal small tool for raking flower beds and cultivating vegetable gardens is also perfect for clearing debris from roofs –– Attach to any standard threaded extension pole for the maximum benefit to your beautiful home and garden.
• LIGHT DUTY AND SMALL SIZE – 10-tine design for efficient work in small spaces –– 4-inch width for fine detail work.
• POSITIVE LOCK NUT – Keeps your rake tip locked tightly to any pole.
• A MULTITUDE OF USES – High-reach raking for home maintenance and longevity of roof drainage systems –– Long-reach soil cultivating before planting –– Deep-reach debris clearing along foundations and around landscaping –– Far-reach flower bed combing after planting –– Gather leaves from tight spots –– Grade base layer aggregates before laying down brick walkways –– Level decorative rocks –– Scrape and abrade wet concrete for exacting finishing –– Reach anywhere that a large rake just can’t manage.
• COMBINE WITH A DOCAPOLE FOR THE ULTIMATE ROOF AND LANDSCAPING RAKING SOLUTION – Attach to a DocaPole extension pole to rake your high and hard-to-reach roof –– Use the same pole to cultivate flower beds and gardens (POLE NOT INCLUDED).

OSCARBIDE 9 Pieces/Set 1/2"Shank Nickel Plated Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Metal Lathe Tools for Turning Grooving Threading Cut Off Tools

• 1/2” Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S08M-DCLCR Boring Bar.
• Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general holders.
• Carbide Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
• Lathe turning tool holders Suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
• Replacement inserts of this kit , please search the Asin of this item:B0BHWBR7V8 on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.

Accusize Industrial Tools 2'' by 3/4'' 90 Deg Square Shoulder Indexable Face Mill with 5 Pcs Apkt1604 Carbide Inserts, 4508-0012

• 90Degree cutting angle. Radial rake angle: -10Degree. Axial rake angle: +7Degree..
• Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
• Cutting Diameter: 2". Arbor Hole d: 3/4"..
• No. of Inserts: 5. Screw: M4 x 8.4. Inserts: APKT1604.

Easy Wood Tools Full-Size Easy Finisher (4200) Woodturning Tool with Round Cutter Scraper Chisel with Replaceable Carbide Insert

• Ergonomic Hardwood Maple Handle: 18" Maple / Tool Bar: 1/2" x 8.5" / Overall length 24.5" / Max Reach: 4". Comes Mounted with a Ci0 Carbide Cutter.
• Never sharpen again! When cutter dulls, loosen screw, turn cutter 1/4 turn for new sharp edge, tighten screw down and start turning! . Stays sharp many times longer than steel.
• Optional Cutter Available: Ci0-NR Patented Negative Rake Round Carbide Replacement Cutter. Negative Rake Carbide Cutters are AWESOME for turning resins, acrylics and extreme hardwoods.
• Easy Wood Tools have a lower cost of ownership due to all you need is a lathe and Easy Wood Tools.
• no need to purchase expensive re-sharpening equipment, plus our tools will not get shorter like high-speed steel which will eventually need replacing. Our tools are also safer due to turning on centerline = no catches..
• Designed and Manufactured 100% in the USA.

Shark 446 Positive Rake Right Hand and Left Hand Round Tool Holder Set

AMMCO 940435 Accu-Turn Style Combination Carbide Bits, 10 Pack

HHIP 2001-0038 1/2-1-3/4 Inch Indexable Countersink & Chamfer Tool, 82 Degree

• Deburr and countersink large diameter holes.
• Positive rake for smooth cutting without chatter..
• TIN coated REPLACEMENT CARBIDE INSERTS (TCMT221) (Item 6042-0022), (TCMT32.51) (Item 6004-7031), (SCMT 432) (Item 6004-3432).

AccusizeTools - 2-1/2\ Indexable Face Shell Mill 90°, Positive Rake w/TPG322 Inserts #3508-0016

• Uses standard TPG322 or TPU 32X carbide insert.

Tenryu IA-18560D 7-1/4\ Saw Blade

• Fully-hardened, expertly-tensioned tool steel bodies for true and accurate cuts.
• Appropriate triple-chip grind pattern for non-ferrous metals.
• TCG (Triple Chip Grind) - Center of kerf is cut first. Then FLAT-TOP RAKER cleans out chips and widens the cut. Commonly used for longer SHARP-LIFE in hard materials. Also good ripping if RAKE is POSITIVE.

Accusize Industrial Tools 2'' Carbide Indexable End Mill, R8 Shank, with 3 Pc Tpg 322 Inserts, 0046-0916

• Carbide Indexable End mills, R8 shank, 2'' TPG32.

Milwaukee 49-56-0132 2-1/4-Inch Ice Hardened Hole Saw

• The product is manufactured in United States.
• ICE HARDENED for up to 50% longer life than the competition.
• Matrix II Bi-Metal Teeth for greater durability.
• Radiused Tooth Back reduces stress on teeth.
• Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal.

Milwaukee 49-56-0153 2-9/16-Inch Ice Hardened Hole Saw

• The product is manufactured in United States.
• ICE HARDENED for up to 50% longer life than the competition.
• Matrix II Bi-Metal Teeth for greater durability.
• Radiused Tooth Back reduces stress on teeth.
• Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal.