Top Powder coated Steel Workbench

SPACECARE Workbench Stepdown Caster, 600 Lbs Capacity Set of 4 Durable Heavy Duty Steel Wheels for Workbenches Tables and Equipments [New Version]

  • 【DURABLE CONSTRUCTION】- The heavy duty wheel casters, constructed with durable solid steel and premium urethane wheels, which can move smoothly and easily support up to 600 lbs per set. The wear-resistant urethane wheels can work smoothly for heavy duty workbenches Tables and Equipments..
  • 【EASY OPERATION】- It just takes one foot to lift workbench table and equipment. Step on the pedal then lift the workbench to an fixed height. Pay attention NOT to step on the edge of outer side, just put your foot at the middle point of pedal(see image 5). The casters cannot work on rocky road, but it works well on smooth road..
  • 【360-DEGREE MANEUVERABILITY】- Equiped with 360-degree swivel bracket, the wheel can turn to any directions. Move the workbench, table, cabinet and equipment to the destination more easily and flexibly..
  • 【MOUNTING SCREWS INCLUDED FOR EASY INSTALLATION】- We offer 16 screws that is enough for installation, but it depends on you whether to install 24 screws or not. Better to make holes in workbench legs with a driller(not included) before installing casters..
  • 【ANTI-SLIP PEDAL】- The pedal is framed with powder coating and satin black finish, marked with anti-slip stripes on its surface which means anti-rust and more durable fo....
Check Stock

Safco Products Boltless Steel and Particleboard Shelving 36"W x 24"D x 72"H with 5 Shelves, Black

  • Boltless steel shelving system 36W x 24″D, assembles without tools.
  • Assemble as a vertical five-shelf, 72″ high storage unit or horizontal 36″ high workbench.
  • Shelf capacity is 850 lbs. per shelf, evenly distributed.
  • Steel construction with durable powder coat finish.
  • Five particle board shelves adjust in 1″ increments.
Check Stock

Little Giant WX-3660-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 60\ x 36\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

Little Giant WX-4284-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 84\ x 42\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

Little Giant WWC-3060-HD Welded Steel Cabinet Workbench, 1 Drawer, 10,000 lb. Load Capacity, 34\ x 60\ x 30\

  • Steel cabinet workbench with gray powder coat finish for use in industrial and manufacturing plants, classrooms, laboratories, and other work environments.
  • 7 gauge steel top with 10,000 lb. load capacity when weight is evenly distributed.
  • 12 gauge steel lower shelf, back, pair of side panels, and pair of locking doors for the secure storage of items.
  • Drawer with recessed handle and hasp for accommodating padlock (sold separately).
  • Legs made of 1/4" thick angle iron with 2" sides for strength.
  • 1 Centered Heavy-Duty Drawer with padlock hasp.
Check Stock

Little Giant WST2-3060-36 Welded Steel Workbench with Lower Shelf, 4500 lbs Load Capacity, 36\ Height x 60\ Width x 30\ Depth

  • Welded steel workbench with lower shelf and 4,500 lb. total load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • 12 gauge steel lower half-shelf with 3" lip at back for storing items while providing legroom.
Check Stock

Little Giant WST2-3672-36 Welded Steel Workbench with Lower Shelf, 4000 lbs Load Capacity, 36\ Height x 72\ Width x 36\ Depth

  • Welded steel workbench with lower shelf and 4,000 lb. total load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Legs and lower braces made of 3/16" thick angle iron with 1-1/2" sides for strength.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • 12 gauge steel lower half-shelf with 3" lip at back for storing items while providing legroom.
Check Stock

Goujxcy Workbench, Steel Tool Workbench with 2 Drawers and Peg Board, Multipurpose Workbench Tool Storage Work Bench for Home Workshop Storage Tools (H63 X W48 X D24)

  • ★ PERFECT WORKBENCH: Features comfortable height for work while seated or standing.
  • MDF worktop provides ample space for a multitude of operations and tool solution..
  • ★ HEAVY DUTY: Made of solid steel frame and heavy duty MDF panel, high quality craftsmanship and strict quality control are used in the manufacturing process to ensure that each workbench is sturdy and stable enough to hold up to hard use in the workshop. The work surface can handle the heavy load of tool storage, holds up to 300 lbs..
  • ★ SMART TOOL STORAGE: A peg board with hooks are ideal for hanging small tools, easy to take on and off. And a drawer with 2 handles is designed for more tools storage..
  • ★ PREMIUM QUALITY: Powder-coated finish makes it resistant to water and rust, as well as the non-slip rubber feet adds stability and do not scratch your floor..
  • ★ SIMPLE ASSEMBLY: Assembly needed with assembly instruction (step by step diagrams and all necessary hardware include), this workshop and garage essential workbench is ideal for commercial, home, garage or office use..
Check Stock

Forward 0806 6-Inch Bench Vise with Swivel Base and Anvil (6')

  • Smooth polished steel anvil size: 3.5x3.5"(9x9cm) for forming and shaping work.
  • Medium-duty cast iron construction (30,000 PSI tensile strength) with a blue powder-coated finish, 29.7 pounds weight (13.5kg). Durable and sturdy.
  • 120-degree swivel base featuring dual lock-down nuts allows rotating the vise to position workpiece, 3 mounting holes anchor vise securely to a workbench.
  • Replaceable microgroove tooth steel jaws grip workpieces without slipping, great for clamping and fixing.
  • Workshop 6" vise is designed for all-purpose home and garage use, woodworking, assembly, and general maintenance, sure grip and high quality.
Check Stock

POWERTEC 71132 Quick-Release Workbench Caster Plates, 4-Pack

  • Easy install and release of casters from workbenches/equipment, etc. One set of casters can service multiple machines, when each are equipped with quick release caster plates.
  • Featuring an easy to use pin-release mechanism that provides smooth lateral caster release. Allows maximum unobstructed clearance around the workbench.
  • Includes: 4 each Caster Plates, Locking Pins, 8 each 1/4”-20 Lock Nuts, Washers, ¼”-20 flat Phillips head bolts (Casters NOT included)..
  • Constructed of high-quality powder-coated 12 gauge steel for high-utility and durability.
Check Stock

Little Giant WST2-2460-36 Welded Steel Workbench, 4500 lb. Load Capacity, 1 Half-Shelf, 36\ x 60\ x 24\

  • Welded steel workbench with lower shelf and 4,500 lb. load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Angle iron cross braces on lower braces are centered to provide legroom.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • Lower half-shelf with 3" lip for storing items while providing legroom.
Check Stock

Little Giant WST2-2448-36 Welded Steel Workbench, 5000 lb. Load Capacity, 1 Half-Shelf, 36\ x 48\ x 24\

  • Welded steel workbench with lower shelf and 5,000 lb. load capacity.
  • 12 gauge steel top with angle iron reinforcement on underside and gussets in the corners for strength and rigidity.
  • Angle iron cross braces on lower braces are centered to provide legroom.
  • Gray powder coat finish for resistance to chipping and corrosion.
  • Lower half-shelf with 3" lip for storing items while providing legroom.
Check Stock