Top Power Adapter Pin Connector

summina Mixing Console Mixer Power Supply AC Adapter 3-Pin Connector 110V Input US Plug for Yamaha MG16/MG166CX/MG166C/F4/F7/6FX

  • Mixing console power adapter with 3-pin connector: 1 & 3 pins--17V, 2 pin--GND..
  • Designed with transformer, providing more stable voltage to your mixing console..
  • A great replacement power supply for Yamaha MG16/MG166CX/MG166C/F4/F7/6FX or other mixers with 3-pin power connector..
  • Power Adapter 3-Pin Connector 110V Input US Plug.
Check Stock

SCSI Adapter DB25M-DM50F

  • Converts a SCA 80 Pin Hard Drive Interface to SCSI I/II/III (UW) HD 50/68 Pin Connector.
Check Stock

EZDIY-FAB ATX 24-pin 90 Degree Power Connector 5V 3 Pin ARGB Rainbow Female to Male Power Adapter for Computer Motherboard ATX Power Supply-1 Pack

  • The ATX 24 Pin 90° Adapter is compatible with all ATX motherboards and power supply units that support a standard 24 pin main power connection..
  • Built with the advanced ARGB lighting system , it features ARGB Rainbow color that glows attractively without straining your eyes ..
  • 90 Degrees right angle design, connecting between PSU 24 Pin Cable and motherboard connector, does not cause pressure on the motherboard connector for long-term stable use..
  • ATX 24-pin female to male connector 90 degrees suitable for motherboard .Plug and play installation..
  • This design will solve the PSU installation for the limited height chassis You can install the 24PIN power cable from vertical to horizontal direction with this adapter..
Check Stock

TeamProfitcom 4 Pin Molex to 4 x 3/4-Pin 12V PC Case Fan Adapter Cable Splitter Braided Sleeved (2 Pack)

  • This Adapter Cable is compatible with ALL 3 pin & 4 pin fans (Constant speed only) !!!.
  • Connector 1 - 4 Pin Molex (Actual 2-Pin).
  • Connector 2 - Four 3 Pin or 4 Pin PC Case Fans.
  • Fans will be Operated at the constant Molex Voltage of 12V (Only 2 Pins In Connector Required).
  • Power Four 3-Pin or 4-Pin (PWM Connector) PC Case Fans With A Molex Connector.
Check Stock

Coolgear USB 3.0 to PATA and SATA 3.5 and 2.5 inch Hard Drive Adapter

  • DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector..
  • Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1..
  • Included 12V 2A power cable is for providing stable electricity supply. Note: 4PIN Power Cable is designed for 3.5’’ IDE drive, SATA drives are not applicable and unnecessary..
  • On/Off Switch for HDD protection. LED light shows power and activity status..
  • What we offer: USB 3.0 to IDE+SATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, OTB Software CD, 24h customer email support..
Check Stock

Wixine 2Pcs Main Board Small Port SAS Hard Disk Adapter SFF-8482 to SATA 22 Pin Adapter Card

  • Ordinary motherboards can also directly bear high-speed SAS hard drives, and SATA supports up to 6GB SATA3 mode..
  • This SAS adapter to 1x SATA 22pin, enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller (hybrid controller).
  • 7 Pin SATA Connector to 15 Pin Male Power Connector and SFF-8482 SAS Connector..
  • Package Included:2Pcs Main Board Small Port SAS Hard Disk Adapter SFF-8482 to SATA 22 Pin Adapter Card(If there are any problems with the product,....
  • Thank you so much for your purchasing from our store.Any question ,please feel free to contact us..
Check Stock

SATA/IDE to USB 3.0 Adapter, Unitek IDE Hard Drive Adapter for Universal 2.5\/3.5\ Inch IDE and SATA External HDD/SSD, Support 10TB

  • 【Universal IDE Hard Drive Adapter】Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. Support SATA 2.5"/3.5" HDD up to 10 TB, IDE 2.5"/3.5" HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Allowed to operate three hard disk drives simultaneously..
  • 【Stable Power Supply】Included 12V 2A power cable. 4PIN Power Cable is designed for 3.5’’ IDE drive..
  • 【SuperSpeed USB 3.0】Data transfer rates up to 5Gbps, backward compatible with USB 2.0/1.1. Support Windows XP/Vista/7/8/10 and Mac OS..
  • 【Driver Free】Plug and play. Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. On/Off Switch for HDD protection. LED light shows Power and Activity status..
  • 【What We Offer】SATA/IDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1.
  • 24h-friendly customer service and email support..
Check Stock

CRJ Mini 2-Pin Male Fan to Standard 3-Pin PC Fan Adapter Cable 2-Pack

  • Sold As A 2-Pack, These Adapter Cables Allow You To Connect Mini 2-Pin Fans To A Standard PC Fan Header.
  • Compatible With Both 3-Pin And 4-Pin Fan Headers On PC Motherboards, Fan Controllers, Fan Power Adapter Cables, Etc..
  • Output: 2-Pin Male Mini Fan Connector (2.54mm Pitch, XH-style).
  • Cable Length (Excluding Connectors): 4"/10cm.
Check Stock

LINKUP - [Active Chip] USB 3.0 (3.1 Gen 2) Internal IDC 20 Pin Motherboard Header to A-Key (Type-E) 20 Pin Female Converter for Type C Panel Mount Adapter

  • ...all USB 3.0 20 pin motherboard headers by standard specification. A small number of motherboards do not use standard USB 3.0 20 pin headers which may cause the adapter to get stuck in the socket..
  • …Forceful removal of the adapter may cause the header socket to be damaged, LINKUP is not responsible for such damage. Connector 1 (Motherboard) - USB 3.0 Internal IDC 20 Pin MB Male Housing Header. Connector 2 (Front Panel) - USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s. Not compatible with USB 2.0 motherboard IDC connector.
  • Active chipset enables full USB-C features, preserves the functions of Channel Configuration pins (CC1&CC2).
  • including attach/removal detection, plug orientation detection, and current advertisement. Also the communications required by the Power Delivery and Alternate Mode..
  • Recommended to be used with LINKUP - USB-C Type Panel Cable Mount Motherboard Header Extension Adapter (B07THC8ZVF). May not fit ITX motherboard in an ITX case due to not having enough space. 【LINKUP Cares】 Backed by a LINKUP Limited 1-Year Warranty and Complimentary Premium Online Support..
  • Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0....
Check Stock

LIANSHU 3Pack 6 Pin PCI-e to SATA Power Cable - 8 Inches

  • LIANSHU 6 Pin PCI-e to SATA Power Cable - 8 Inches ,SATA15Pin M To 6Pin HSG.
  • Cable material: ULStandard. 18 AWG Full 100%Copper.
  • PCI EXPRESS VIDEO CARD POWER CABLE Adapter Connects A PCIe Video Card To A Power Supply With A Spare SATA Power Connection,PSU UPGRADE SAVER Power Cable Provides An Option For A Power Supply Without A PCIe Connection For GPU Power..
  • HSG 6 Pin PCIe To 15 PIN SATA Female To Male Cable Provides A Convenient Solution For Low Power Video Graphics Card That Can Be Powered From A Single SATA Power Connection.STURDY GRAPHICS CARD Power Cable Has A Male SATA Connector With Keyed Rails And A Female PCI Connector With A Latch For A Secure Connection On Each End To Prevent Accidental Disconnections.
  • VIDEO GRAPHICS CARD Compatible With Graphics Cards From Popular Manufacturers From ASRock, ASUS, EVGA, And Gigabyte.
Check Stock

Cablecc 15Pin SATA Male Power Cable to Molex 4-pin IDE Hard Disk Drive Power Adapter

  • CY 15Pin SATA Male Power Cable to Molex 4-pin IDE Hard Disk Drive Power Adapter.
  • This adapter is used for connecting a SATA power connector of the power supply to standard IDE 4-pin Hard Drive or Optical Drive..
Check Stock

MECMO Multi-Tow 4-Way Flat to 7-Way RV Blade and 4-Way Flat Female Trailer Wiring Adapter Connector Kit Adapt 4-Way Flat Vehicle-Side Socket to Multiple Trailer Plugs with Mounting Bracket

  • 【Multi-Plug】This dual-output 4 Pin and 7 Pin trailer wiring adapter makes it easy to tow different trailers with your vehicle, for used to convert any 4-wire flat vehicle-end plug to a combination 7-way blade RV outlet and 4-way flat outlet. Provides multiple towing options from one vehicle-end connector for towing any heavy / light duty trailers. This special dual-output electrical adapter allows a connection to be made between a mismatched trailer plug and vehicle socket..
  • 【Universal Trailer Adapter】MECMO Multi-Tow 4&7 trailer connector adapter provides two standard trailer connections, a 7-pin RV blade and a 4-way flat socket, adapting for versatile towing options. Additional leads for brake, reverse and power function allowing you to transfer your 4-pin factory connector to a standard 7-way..
  • 【4 Flat & 7 Way Blade Output】 Dual 4 way and 7 way trailer hitch wiring adapter allows you to connect 4 poles or 7 poles trailer to your factory 4 pin socket to power taillights, brake lights, turn signals, reverse lights, electric trailer brakes and auxiliary power (12V+ wire)..
  • 【Heavy Duty】 Both 7-way RV output socket and 4-way flat equip with a tight-fitting dust cover and a spring loaded cover to keep terminals clean when not in use.....
Check Stock