Top Power Amplifier For Signal Generator

TV Antenna Amplifier Signal Booster, Indoor HD Digital TV Antenna Booster Signal Amplifier, 24db Distribution Amplifier, Clears Up Pixelated Low Channels, Supports HD Smart TV VHF/UHF, AC Adapter

  • Wide Compatibility: The TV antenna signal booster can be used with all TV antennas. Fully compatible with 1080p and 4k Ultra HD, The TV amplifier signal booster can provide high quality images and sound and gives you a pleasant viewing experience..
  • Antenna Booster: The 24db distribution amplifier is used to strengthen signal reception from your antenna to TV, and extends signal reception and filters out interference, blocks unwanted cell phone interference. Meanwhile, the 24db TwinAmp technology separately amplifies VHF/UHF signals, maximums performance and lowest noise and interference levels on any non-amplified outdoor antenna, and enhances signal stability for crystal clear reception of HDTV, VHF and UHF channels, has great viewing..
  • Antenna Amplifier Booster for TV -Easy to Use: Firstly, connect TV antenna to the amplifier, and then connect amplifier to TV and AC power adapter. Lastly, perform a new channel scan, until you find channel, and it is done..
  • Stable Signal - High Quality Audio and Video: TV antenna booster signal amplifier can bring the experience of the new over-the-air TV broadcast standard, enjoying super....
Check Stock

Crunch PDX-1000.2 PowerDriveX 1000 Watt 2 Channel Exclusive Blue A/B Car Stereo Amplifier

  • 1000-WATT POWER: The Crunch PowerDriveX Car Stero Amplifier boasts 1000 Watts power.
  • 2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged.
  • 2 CHANNEL AMP: 2 Channel amplifier with Low noise pre amplifier with Rugged MOSFET pulse width modulation power supply.
  • Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
  • INPUTS/OUTPUTS: Low level RCA inputs and outputs.
  • Audio inputs: Unbalanced inputs (RCA) Audio outputs: Line output (RCA).
  • FEATURES: Flexible installation allows this amplifier to run in 2 channel or bridged mono mode.
  • Designed to be high sound quality with minimal distortion.
  • Maximum heat dissipation which minimizes distortion.
  • SPECIFICATIONS: Variable voltage: 0.2 5 volts.
  • Crossover type: Electronic switch FULL / LPF / HPF.
Check Stock

Rockville RCS80-1 60 Watt 70V Commercial/Restaurant Amplifier/Bluetooth Receiver

  • Rockville RCS80-1 60 Watt 70V commercial restaurant amplifier/Receiver with Bluetooth.
  • Rockville RCS80-1 60 Watt commercial/restaurant amplifier 19" Rack-mountable (removable rack brackets) digital hybrid amplifier/Receiver. Capable of 70 volt, 100 Volt, 16 ohm, 8ohm, and 4 ohm. 70/100 volt True RMS power: 60 watts. 4 ohm RMS power: 80 watts..
  • 8 ohm RMS power: 70 watts. 16 ohm RMS power: 11 watts. Built in Bluetooth Audio streaming. Fm radio tuner. Usb input to play audio stored on a thumb drive (32GB max). SD card slot to play music stored on an SD card (32GB max)..
  • Distortion: 79dB. Power requirements: 120V/ 50-60Hz. A weighted signal to noise (@ 1W) -79.0Dba. A weighted signal to noise (referenced to full 4 ohm power) -95.1Dba..
  • Frequency response (bandwidth @ 2Vrams out, @ -3.0dB) 8 ohms.
Check Stock

AmpPro Ultra Low Noise TV Antenna and Distribution Amplifier,G25F101U

  • Ultra Low Noise Amplifier Boost enhances any non-amplified antenna, delivering more range and channels. The Boost Digital TV Antenna Amplifier is the most advanced digital TV antenna amplifier available featuring very low noise figure. Using the latest advances in amplifier technology, Boost enhances any non-amplified antenna, delivering more range and available channels. Give your antenna a Boost today and get more channels and a better picture from over-the-air HD television broadcasts..
  • Works with Any Non-Amplified/Passive TV Antenna The Boost amplifier helps pick up channels that your non-amplified antenna alone may not be able to pick up. Additionally, the amplifier minimizes pixelization and drop-outs, using Clear Circuit Technology. The Boost amplifier works with any passive/non-amplified antenna. It works with VHF, UHF and Cable signals–typical gain is 25 dB for VHF, UHF and Cable..
  • Distribution Amplifier – Deliver a Better Signal to Multiple TVs The Boost amplifier can even be used to help distribute a stronger signal to multiple TVs. Connect the coax running from the antenna to the “IN /ANT” port of the amplifier, and connect the cable running from the “OUT/TV” port of the amplifier to a splitter. Then, use the provided USB c....
Check Stock

SHCA Colored BASS KNOB with Leads (Blue)

  • Simple Connection: the Rca Volume Control RCA output connector to the car stereo and the input RCA connector to the device, no additional wires are required. With RCA composite cables,this amplifier controller offers high-quality signal transmission.Adds subwoof level control to any head unit or balances a multiple amplifier installation.
  • This RCA amplifier controller offers high-quality signal transmission with RCA composite cables.Made from high quality materials and metal for optimal signal transfer.Adds subwoof level control to any head unit. Perfect for balancing the system to change music style.
  • Perfect for balancing the system to change music styles, control your sub-woofer output, you can set the subwoofer on maximum gain and then vary the knob to taste as per genre or media good fit for Car, Motorcycle, Speakers, Home.Stereo RCA input and output. Simple in and out connections,no additional wiring needed.Mini size easy to installation by DIY without manuals.
  • RCA amplifier is control the gain level / volume of devices connected to the car stereo, such as speaker, amplifier, bass, etc. Dash Mount Amplifier Level Control for Volume Adjustment. dash mount rca amplifier level control is used to adjust amplifier gain, power level, stereo, equalizer or....
Check Stock

Phono Turntable Preamp, Moukey Stereo Mini Preamplifier,RCA Input, RCA Output for Vinyl Record Player, Low Noise,Independent Knob Control Operation, with DC 5V Adapter-MPAMP1

  • 【Easy to Use】 This preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground , and then connect the amplifier receiver to the RCA outputs. Note: Please use RCA cables with better shielding properties (not included), otherwise there will be buzzing, noise, etc..
  • 【 Low Noise Operation】Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. Hooking up the preamp to the turntable and audio device(for example, power amplifier), and then connect the power amplifier to the speaker, you can enjoy better sound and less distortion..
  • 【Converts Phono Signals】Turntable preamplifier, which can convert sound signal into line level signal, this advanced circuit sound preamplifier, input sensitivity electromagnetic pickup..
  • 【DC 5V Power Supply】This product uses the latest DC 5V power supply mode, so no longer restricts the application scenarios. Note: Please use an external power supply with CE or UL certification, and stay away from the interference source, otherwise it will cause noise and other undesirable interference to the product..
  • 【Double Gain】Considering that the signal of the phonograph is relatively weak, our company has added a set of gain adjustments for the input an....
Check Stock

TV Antenna Amplifier, 25dB High Gain Signal Booster for Digital TV Antenna Indoor, Low Noise/Clears Up Pixelated Amplifier, Adjustable dB&Timer, USB Cable Power Supply

  • 【Before Buying】: Please check the signal strength in your area: ✔ If a lot of green channels available, DO NOT recommend using a booster. ✔ If a lot of yellow or orange channels available suggest adding an amplifier to boost weakened signals..
  • 【dB Adjuster and Timer】: The amplifier has an adjustable DBI tuner, you can turn left and right to adjust the TV antenna amplifier dB to help your TV find the best signal reception state. Amplifier With a digital time display, you can check the time you watch TV at any time, which can well protect the eyesight of you and your family..
  • 【SIGNAL BOOSTER】: Amplifier it build-in 4G LTE Filter, blocks 3G and 4G wireless signals, clear up any low-strength fuzzy or pixelated channels for clear smooth pictures and stable channel reception. booster With 2 shifts for adjusting the gain from 0dB to 25dB, the lowest noise figure to reduce signal dropout and pixelation..
  • 【Easy Installation】: Just connect the amplifier to the antenna and TV or STB box, then plug into the USB port for getting power, HD digital TV antenna amplifier works with any non-amplified indoor tv antennas. The number of channels reception will vary depending on your surroundings and how far away you are from broadcast towers..
Check Stock

12V Ant - 208 Car Radio FM AM Antenna Signal Amplifier Booster for Marine Car Boat RV

  • UPGRADE MATERIAL: Thicken the tinplate full metal casing, effectively shield the influence of interference in the automobile console on the amplifier. Use thick aluminum foil copper core 3C-2V signal cable, better shielding interference.
  • COAXIAL CABLE POWER SUPPLY: Powering the car radio amplifier via signal lines. Use pure copper reinforced antenna connector, not easily deformed, the Male and female heads are more closely integrated.
  • SAFETY AND PROTECTION: With antenna short circuit protection, automatic power-off when the original car antenna is faulty, the original glass column fuse is replaced with a waterproof insert piece, not worry about poor contact, no electricity.
  • WIDE RANGE OF APPLICATIONS: Amplifier cable could use with antenna and ground wire, simple wiring. Works for both AM and FM radio stations, support 12V and 24V cars, trucks are also applicable.
  • SIMPLE INSTALLATION: When installing, connect the 12V power supply, install the amplifier between the radio and the antenna, without changing the original car antenna route, the installation is simple and convenient. For easy installation and fixing, each amplifier comes with a piece of 3M glue.
Check Stock

Amplified HD Digital TV Antenna Long 330+ Miles Range Small Portable Indoor Antennas Includes Magnetic Base Support Smart 4K 1080P Fire TV and All Older TV s HDTV Television for Free Local Channels

  • Signal Booster – This amplifier will enhance and strengthen the signal received by your indoor non-amplified passive TV antenna. Amplifiers will....
  • Signal Filter: This Amplifier is designed with Second Function, Filtering of Interfering Signals Such as Mobile LTE Signal Interference (3G and 4G)....
  • Easy to Install – Connect The TV Antenna to The Amplifier The Amplifier to Your TV the AC Power Adapter (Included) to A Nearby Wall Outlet Or You....
  • Universal Amplifier: This Amplifier Works With All Brands Of HDTV Antenna, Improves VHF and UHF Reception and Boosts Signals For Digital Televisions.....
  • 15Feet High-Quality Cable：The Ultra-long High-performance Coaxial Cable Ensure that The Antenna Can Be Attached Outdoor, This Durable Coaxial Cable....
Check Stock

Seismic Audio Speakers Epicenter 5004 4 Channel Power Amplifier, 2000 Watts RMS Amplifier

  • Power Amplifier: Our Epicenter Amplifier is a beast! This is a 4 channel amplifier capable of pushing just about anything..
  • Audio Amplifier: This is a high end amplifier that is rack mountable. This power amplifier is easily capable of pushing eight 18" subwoofer cabinets or two pairs of dual 15" speakers..
  • 2000 Watts RMS Amp: This audio amplifier can handle 4 x 500 Watts RMS at 8 Ohms, 4 x 850 Watts RMS at 4 Ohms, 2 x 1600 Watts RMS at 8 Ohm Bridge of power..
  • 4 Channel Amplifier: The front of the Seismic Audio Speakers’ amplifier has channel A, B, C, and D volume controls, power indicator, clip indicator, protection mode indicator, and signal indicator..
  • Size And Weight Details: This 2000 Watts RMS amp fits standard 19” rack cases and weighs 69 lbs..
Check Stock

4 Rockville Cube 70v Black 3.5 Commercial Swivel Wall Mount Restaurant Speakers

  • Package Includes: (1) RockvilIe RCS80-1 60 Watt 70v Commercial/Restaurant Amplifier/Bluetooth Receiver. (3) Cube by RockvilIe Pair of 3.5" Black....
  • RockvilIe RCS80-1 60 Watt Commercial/Restaurant Amplifier 19" Rack-Mountable (Removable Rack Brackets) Digital Hybrid Amplifier/Receiver. Capable of....
  • Separate volume control for MIC1, MIC2, MP3, LINE1, LINE 2 input. Bass and Treble control. 5 segments signal level indication. Built in cooling system....
  • Signal to Noise Ratio: > 79dB. Power Requirements: 120V / 50-60Hz. A Weighted Signal to Noise (@ 1W) -79.0dBA. A Weighted Signal to Noise (referenced....
  • (2) mounting brackets with metal bars. (2) safety cables. (8) screws. (1) User manual. Cube by RockvilIe - Pair of Black 3.5 70 Volt Commercial....
Check Stock

Rockville Commercial Restaurant Bluetooth Amplifier+(6) 3.5' Black Cube Speakers

  • Package Includes: (1) RockvilIe RCS80-1 60 Watt 70v Commercial/Restaurant Amplifier/Bluetooth Receiver. (3) Cube by RockvilIe Pair of 3.5" Black Commercial 70v Swivel Wall Mount Speakers. Includes: Amplifier. Remote. Rack mount ears. Power Cable. FM Radio antenna. Owners manual. Warranty. Applications: Restaurant. Bar. Caf. School. Conference room. Lounge. Features:.
  • RockvilIe RCS80-1 60 Watt Commercial/Restaurant Amplifier 19" Rack-Mountable (Removable Rack Brackets) Digital Hybrid Amplifier/Receiver. Capable of 70 volt, 100 volt, 16 ohm, 8ohm, and 4 ohm. 70/100 volt True RMS Power: 60 Watts. 4 ohm RMS power: 80 Watts. 8 ohm RMS power: 70 Watts. 16 ohm RMS power: 11 Watts. Built in Bluetooth audio streaming. FM radio tuner. USB input to play audio stored on a thumb drive (32gb max). SD card slot to play music stored on an SD Card (32gb max).
  • Separate volume control for MIC1, MIC2, MP3, LINE1, LINE 2 input. Bass and Treble control. 5 segments signal level indication. Built in cooling system keeps component cool at all times. Inputs and Outputs: (2) Sets RCA AUX inputs. (2) Mic inputs. RCA REC output. 100V speaker red positive speaker output terminal. 70V speaker red positive speaker output terminal. 8 Ohm red positive speaker output terminal. Shared ne....
Check Stock