Top Power Battery Connector

LAMPVPATH (Pack of 5) I-Type 9V Battery Connector, 9 Volt Battery Clip, 9V Battery Clip Connector with Wire and Hard Buckle Plastic Housing

  • Package: Includes 5 pcs I TYPE 9v battery connector.
  • All these 9 volt battery connectors are with bare leads, all these 9 volt battery clip are with hard buckle plastic housing, no 9V battery is included in the package..
  • Good Material of 9v battery clip: Very Hard Plastic ABS and Metal to make the sturdy house for 9v battery snap connector.(Means these 9v battery clip connector is designed not easy to pull apart when removing from the battery, they have longer life than other 9v snap connector that are just fixed on soft material).
  • Size of 9 volt battery clips with wires( Each ): 2.4 x 1.2 x 0.7cm/0.94" x 0.47" x 0.28" with wire length approx. 15 cm/ 5.9 inches.
  • Connection wires color of 9v connector: black and red..
  • Function: These 9 volt battery connectors with clips are easy replace a broken battery connector on your electronic device, making removable power connections in home projects, they should be part of any experimenter or maker's kit..
  • Attention: All these 9 volt battery clip connector are only suitable for 9v battery and 9v battery holders, please make sure this when buying this item, please do not apply them when your hands are wet..
Check Stock

11.1V 5200mAh 6 Cell Lithium ion 18650 57.72Wh Rechange Battery Pack with 2 Pin MTA-100 Connectors

  • Lithium Ion 11.1V 5200mAh 57.72Wh 18650 6 Cell Battery Pack.
  • High Density Rechargeable Battery Pack - Heavy Weight Battery Pack - Not a Light Weight Cheap Battery Pack..
  • US Stock/Supply , US Company, US Shipping and Tech Support, Get Assistance nearly 24/7 via phone or text.
  • Heavy Duty 18 Gauge Wire. Comes Pre-tipped with a 2 Pin Female Connector and Includes a Loose 2 Pin Male Connector for you to Install on Your Device to Match the Battery Pack Connector. You Can Also Remove the Connector from the Battery Pack to fit your own Connector or make a Charger..
  • This Light Weight and High Energy Density Battery Pack has a Higher Capacity than most other Rechargeable Battery Packs. An Installed IC Chip Pevents the Battery Pack from Over Charge and Over Discharge. It Helps Protect the Battery Chemistry Integrity and Prolongs Battery Life. Perfect for Projects and Devices that Requires a 11V-12V Battery Pack for Power..
Check Stock

11.1V 2600mAh 3 Cell Lithium ion 18650 28.86Wh Rechange Battery Pack with 2 Pin MTA-100 Connectors

  • Lithium Ion 11.1V 2600mAh 28.86Wh 18650 3 Cell Battery Pack.
  • High Density Rechargeable Battery Pack – Heavy Weight Battery Pack – Not a Light Weight Cheap Battery Pack..
  • US Stock/Supply , US Company, US Shipping and Tech Support, Get Assistance nearly 24/7 via phone or text.
  • Heavy Duty 18 Gauge Wire. Comes Pre-tipped with a 2 Pin Female Connector and Includes a Loose 2 Pin Male Connector for you to Install on Your Device to Match the Battery Pack Connector. You Can Also Remove the Connector from the Battery Pack to fit your own Connector or make a Charger..
  • This Light Weight and High Energy Density Battery Pack has a Higher Capacity than most other Rechargeable Battery Packs. An Installed IC Chip Pevents the Battery Pack from Over Charge and Over Discharge. It Helps Protect the Battery Chemistry Integrity and Prolongs Battery Life. Perfect for Projects and Devices that Requires a 11V-12V Battery Pack for Power..
Check Stock

Power Wheels Adapter for 20V DeWalt Battery 18V Dock Power Connector Battery Adapter with 14 Gauge Robotics, Yellow

  • 【Compatible Models】The battery connector has been tested and can be used for DeWALT 20V /18VDCB series lithium-ion batteries. Including models: DCB184, DCB204 and DCB205, DCB200, DCB203, DCB606, etc..
  • 【Easy to Use】Just move the power mount connector to the inside of the groove gently, then install the battery into the connector. Adapter has 14 gauge wire installed, The red wire is connected to the positive battery terminal, and the black wire is connected to the negative battery terminal..
  • 【Perfect Fit】Battery dock adapter locks on you battery very well. Meanwhile, battery adapter has compact size and light weight, which is easy to use and carry, will not bring you any burden. The battery adapter is equipped with fixing screw holes for easy fixing with screws.Premium material make it safe..
  • 【Wide Usages】Adapter has 14 gauge wire installed, which is suitable for DIY high power applications. Upgrade your power wheels, RC toys, robotics, electric bicycle, bluetooth speaker and portable welder, etc..
  • 【Best Service】If you have any problems, please do not hesitate to ....
Check Stock

Battery Packs Lithium Ion Polymer Battery 3.7V 1200mAh (1 piece)

  • Premium LiPo Rechargeable Battery - Our lithium polymer battery, known as 'lipo' or 'lipoly' battery, is thin, light, and powerful. It’s rechargeable hundreds of times, making it an excellent choice for those who need a reliable power source..
  • Versatile Polymer Battery - This polymer rechargeable battery is an ideal battery replacement for the Ecologic Mart reading light clip. It is also a high-capacity power source for various devices like MP3s, MP4s, PSPs, and GPS trackers..
  • Light and Compact - Bring an extra lipo rechargeable battery to keep your devices charged up. Since it’s lightweight and portable, you can easily place the 3.7 volt battery in your pouch or handbag..
  • Don't Mistake it for PH2.0 - Note that this polymer battery is NOT PH2.0. If the lithium polymer battery connector you are looking for is 2.0, you need to cut the wires that it currently has and replace them with another battery connector..
  • Accurate Specifications - Our lithium ion battery 3.7v 1200mah is known for its high energy density with the Red(+) and Black(-) labels. The 1200mah lipo battery also has an approximately 4.5 Wh battery capacity. It comes with a Micro JST 1.25mm 2Pin Male Connector with a 1.25 mm distance between two wires..
Check Stock

FCONEGY NiMH Battery 9.6V 1700mAh 8-Cell Nunchuck Pack with Small Tamiya Plug for Airsoft Gun

  • High performance batteries provide consistent power output coupled with high capacity.
  • 2/3A 1700mAh NiMH Battery 8-Cell Nunchunk Pack 9.6V ..
  • High power battery pack with Small Tamiya Connector for Airsoft Gun..
  • Battery Dimension:124*20*17.1mm & weight:198g..
  • Before purchasing make sure that the battery is suitable for your Airsoft gun.(Dimension,Connector,Battery vlotage etc.).
Check Stock

DZS Elec 6pcs 15cm 9V Battery Snap Connector Clip Lead Wire Experimental Battery Snap Power Cable for Arduino Project or LED Light Bar

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Use: Can be conveniently connected to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check Stock

Bulldog Smart Airsoft Battery Charger for 8.4v to 9.6v Ni-MH / Ni-CD [Compact]

  • Peak performance pack - Tenergy’s high performance batteries provide more playtime.
  • our 8.4V 3800mAh NiMH rechargeable battery made of 7 cells Sub C NiMH batteries..
  • Ideal AEG battery power – Tenergy 8.4V NiMH battery designed to fit M16, SR16, full stock AK series, and full stock MP5 series: G&P M16A1, KNIGHTS SR16, MP5 SD5, MK5A4, G3 SD1, M16VN, CA G3 SG1, G3 A3, FAMASF1, M1A1, ASSV, PSG1 and RC cars/planes with Standard Tamiya Connector. For upgraded and/or modified AEGs, we recommend finding connector and measuring the gun compartment for best fit..
  • Fast charge and lasting capacity - Tenergy's AEG battery features rapid charge up, long runtime, and compatibility with the Tenergy 6V-12V RC battery charger..
  • Battery pack configuration - Tenergy electric gun battery dimensions: 6.13" (length), 1.9" (width) and 1.0" (height). Weighs 15.2 oz..
  • Large Tamiya connector - The airsoft replacement battery pack with Tamiya battery pack connector, standard Tamiya female connector assembled with 16 G wire..
Check Stock

5 Pack Black Light Micro Effects Light 405nm Violet LED Mini Blacklight with 9V Battery Clip for Props Scenery Fluorescent Paints Theatrical Costumes UV Glow Inks

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Use: Can be conveniently connected to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check Stock

UpBright 5V AC/DC Adapter Compatible with Novatel Verizon Wireless MiFi 4510L 4620L 5510L 6620L 6620LE 2200 Jetpack 4G LTE Mobile Hotspot Netgear AC791L Ellipsis MHS700L MHS800L MHS815L MHS900L

  • First adjust the push plate to accommodate the size of your battery (battery not included).
  • The push plate can be pull down fit various size battery (up to 76mm) as shown in the picture.
  • Place the battery on the push plate and align the 2 adjustable connector pong with the battery -/+ (If you can not identify the -/+ on the battery, it is usually the first and last charge connector on the battery).
  • Simply plug the dock to a power oulet to start charging your battery..
  • Charge status indicator LED ( Red LED indicate charging, Green indicate idle).
  • If Red LED does not indicate, please properly adjust the 2 -/+ pongs connector with the battery -/+. If the battery have 3 or 4 charge connector, the -/+ are usually the first and last charge connector of the battery..
Check Stock

Wire Harness Connector for Fisher-Price Power Wheels 12-Volt SLA Battery

  • Use it to connect a standard 12-Volt SLA battery to your Power Wheels® vehicle..
  • The connector is 100% compatible with all Power Wheels® 12-Volt ride-on toys from Fisher-Price®.
  • A 30-AMP fuse (included) is installed on the harness and it is replaceable..
  • 12-Volt SLA Battery Not Included (you need to purchase a 12-Volt battery separately to use with the connector).
Check Stock

Pack of 2 6V Power Box 4xAA Battery Holder Case with DC Connector Compatible with Barrel Jack Connector for Arduino

  • The connector is paired with the barrel jack on Arduino to supply power to your device, power supply to LED lamp power supply, etc., and you can also go to DIY for more play.
  • The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector.
  • The connector compatible with Arduino (among a number of other products) allowing you to easily make your project battery powered.
  • Package includes: 2 x 4xAA Battery Holder Case.
Check Stock