Top Power Isolation - BuyWiseBest.com

Intona USB 2.0 Hi-Speed Isolator Standard Version Black 1.000VRMS

New: auxiliary power input The secondary side may be powered by an external power feed with up to 2000mA for energy-hungry devices via Micro-USB. The....
Provides galvanic isolation to the USB bus.
Compliant to USB 2.0 Hi-Speed (480 MBit/s).
Isolation withstands 5kVrms, Advanced ESD protection (20kV).

Support international standard IEEE802.3 af & IEEE802.3at(30W).
POE port Support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE 802.3 I, IEEE 802.3 u, IEEE 802.3 x, IEEE 802.3 af/at..
PD support 44V-57V voltage transmission, Automatically detects power supply from PSE power supply module.
Support the isolation circuit protection, can effectively protect electrical equipment.
Support the short circuit, overvoltage protection.
12V 2A power output, easy to access Poe network for non-PoE terminal.

For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..

✔[High Quality PCB Material]: High quality PCB material, corrosion‑resistant, anti‑oxidation, increased service life..
✔[2-Way]: There should be a certain degree of isolation between the output ports of the power divider, and the input signal of one channel can be divided into equal or unequal signals of two channels..
✔[Large Heat Dissipation Area]: With large heat dissipation area, which can increase the continuous working time..
✔[Good Contact Performance]: The connecting part has good contact performance, which ensures stable working..
✔[Low Loss]: The power divider has wide operating frequency, low insertion loss, high gain, high isolation and stable performance..

Patented Isolation Voltage Protection: BESTEK 150W Car Power Inverter equipped with low voltage and high voltage isolation, provides a perfect protection for your device.
Smart Dual USB: 4.2A output USB ports with smart IC that can automatically detect your devices to deliver optimal charging speed up to 2.4A per port, 4.2A total, one 110V AC outlets for charging larger devices such as laptops and tablets.
Safety Door & Multi-Protection: AC outlets with built-in safety door protecting kids from unexpected electricity Shock. Safe charging design provides protection against overheating, under and over voltage charging, short circuiting, overloads, and overcharging.
Ultra Compact and Lightweight: iphone-sized design ideal for use on vacations, work trips, and camping. 32 inch long cigarette lighter plug makes the power inverter can be plugged into almost any vehicle.
ETL certification: BESTEK 150W power Inverter with ETL certification provides 150 watts continuous DC to AC power and 250 Watts of peak power, 18 months warranty.

BESTEK Advantage: America's #1 power inverter brand. Provides 150W continuous DC to AC power and 250W instantaneous power, featuring 1 AC outlet and 2....
Patented Isolation Voltage Protection: This certified beast comes with low pressure and high pressure isolation and 25 amps fuse. Perfectly protect....
Fast Charging: Powerful 110V AC outlet for charging larger devices such as laptops and tablets. 2 USB ports (0-2.4A) for powering USB compatible....
A Must Have for Road Trips: Ultra compact and lightweight, only 3.2 x 2.5 x 1.5 inches, 8 oz+. Space-saving and easy storage. 32 inch cord makes it....
100% Satisfaction: 18-Months Warranty, ETL certification. Durable metal housing provides advanced protection from drops and bumps. Integrated silent....

Rotationally symmetric cardioid polar pattern.
Electret condenser microphone with self contained electronics eliminating the need for an external power module.
JTS rubberized isolation componentry assure super low handling noise and mechanical isolation.

Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
The measured current of this current transmitter is AC 0-10A/20A/50A.
The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
through‑core structure design, isolation withstand voltage up to 2000VAC.
hysteresis less than 1%, can be used under strong magnetic field conditions..
The shell is made of self-extinguishing material ABS.
it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..

Working Stability: annual change 003c 0.2%.
Impulse Voltage:5KV(peak value),1.2/50uS.
Load Capacity: 2 times current continuous.
Storage Environment:-40 to +115 degress Centigrade,20%-95% without condensation.
Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
Working Environment:-25 to 80 degrees Centigrade,20%-90% without condensation.
Isolation Resistance:20M Ohm(DC500V) or above.
Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).

Working Stability: annual change 003c 0.2%.
Impulse Voltage:5KV(peak value),1.2/50uS.
Load Capacity: 2 times current continuous.
Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
Isolation Resistance:20M Ohm(DC500V) or above.
Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).

Self-powered, no external power supply required..
Easy to install and use, no need to connect DC into the circuit when measuring..
Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
Straight- through structure design, isolation withstand voltage up to 2000V..
Measured current AC 0-10/20/50A, output signal DC 0-10V..