Top Power Line Fitting Clamp

Eliseo 1.5'' Sanitary Tri-Clamp, 304 Stainless Steel Single Pin Heavy Duty Tri Clamp Clover with Wing Nut for Ferrule TC 1.5''(4 Pack)

  • 【PACKAGE INCLUDE】: 4 Pack 1.5 inch single pin tri clamp with 4 Pack tri-clamp rubber Gasket.
  • 【SANITARY CLAMP SIZE】Tube OD: 1 Inch to 1-1/2 Inch, Tri Clamp: 1.5inch, Ferrule Size: 2inch (50.5MM).
  • 【HEAVY DUTY TRI-CLOVER CLAMP】Tri-Clamp made of 304 stainless steel, higher corrosion resistance than the 302 grade stainless steel, ideal for most intended tri clamp fitting connections.
  • 【WING NUT STYLE SINGLE-PIN CLAMP】The wing nut style tightening screw allows for quick and easy assembly without tools.
  • 【SANITARY FITTING FOR HOME BREWING】Single hinge clamp is widely used in beer, beverage, pharmaceutical and chemical industry.
Check Stock

DERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 (Tri Clamp Size: 4 inch x 2 inch)

  • Bowl Reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless steel 304 for resistance to corrosion and high temperatures.
  • Tri Clamp Bowl Reducer Ferrule Size 119MM fits 4" tri clamp.
  • Tri Clamp Bowl Reducer Ferrule Size 64MM fits 2" tri clamp.
Check Stock

6 Pieces 1.5 Inch Sanitary Fitting Cap Stainless Steel 304 Sanitary End Cap Pipe Fitting Clamp Solid End Caps Blind Tri Caps Clamp for Dairy Products Food Wine Beverage Cosmetics Engineering

  • What you get: You will get a total of 6 sanitary tube caps suitable for 1.5 inch clamps, beautiful internal and external polishing, beautiful internal and external mirror surfaces, and smooth surface, acid and alkali resistance, corrosion resistance.
  • Quality material: this sanitary fitting cap is made of quality stainless steel 304, therefore, it's sanitary, rust and resistance to corrosion and high temperatures with long service life.
  • Easy replacement: it is standard size and regular material parts compatible with most standard size clover or clamp fittings, the solid end cap should be combined with a gasket and clamp to make a sanitary and easily cleanable connection.
  • Sealing performance: this stainless sanitary fitting cap has good sealing performance, it is clamping on to the end of a pipe or tube to close the line, providing a non-permanent seal that provides take down access.
  • Widely use: these stainless steel end caps can be applied in the dairy products, food, wine, beverage, cosmetics, mechanical and electrical engineering, mechanical manufacturing and and other sanitary process industries.
Check Stock

Raindrip 100050100 1/4\ 50' White Tubing, 0.25 inches x 50 Feet

  • Slowly waters the soil around your plants for complete root zone hydration.
  • Ideal for short runs on flat surfaces, such as vegetable gardens, borders, and around small plants.
  • Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170 in..
  • connects to ½ in., 5/8 in., or 0.710 in. supply line with ¼ in. micro fitting such as a barbed connector or Clamp N Pierce Connector.
  • As part of a complete drip irrigation system, the soaker tubing seeps out water from the entire line, keeping soil moist.
  • Flexible tubing bends to accommodate curved irrigation areas as well as straight runs.
  • Porous non-pressure compensating material gently seeps water out of the entire line of tubing.
  • Comes with one 50 ft. coil of ¼ in. Soaker Tubing.
  • in cold climate areas, no need to winterize—the soaker tubing can be left in place or covered in soil or mulch, excess water will gradually seep out.
Check Stock

Apollo Stainless Steel Crimp Clamp Tool - 1 Each

  • ICP-PC01 Pinch Clamp Removal Tool is specifically designed to remove Stainless Steel Pinch Clamps (not included) in the event of a mistake or need for a modification..
  • Compatible with any brand of stainless steel pinch clamps designed for use with PEX. Also ideal for removal ear clamps with Max. ear width 13mm..
  • Compound action cutting tool: maximum mechanical advantage for easier and safer use. High mechanical advantage makes clamp removal easier and reduces the risk of strain injury..
  • Designed to deliver many cutting cycles without loss of performance, using the lowest practical cutting force. Constructed of solid metal for long tool life, with textured grips for a more secure hold. Cinch clamp removal tool to be used in conjunction with the cinch rings to remove PEX cinch clamp rings. The tool provides a fast and quiet solution to removing PEX fittings and can be used in both home and commercial settings. Safely cuts PEX stainless steel clamps for quick fitting salvage..
  • A fitting that has been removed and is in good shape can be used in another system saving money. Avoid clamping on the insert ribs or barbed area, which will damage the fitting making it unusable. Ideal for stainless steel and steel clamps from Apollo, Oetiker, Watts, etc..
Check Stock

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

  • 1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
  • 2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
  • 3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
  • 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
  • 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • ...o kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum opening approx: 9.3CM/3.66IN.NexADD fuel line clip removal tool suitable for use in large space.Fuel line hose clamp pliers designed to compress the quick disconnect lugs without damaging connector.Suitable for VW, Audi, Fiat, GM,Vauxhall,Mercedes and other makes and models..
  • 9" Length Fuel Filter Calipers ★- Releasing connect....
Check Stock

Waekon 20560 ABS Sensor Pinpoint Tester

  • Measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads.
  • Detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and....
  • Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord.
  • CAT III 600V, Class 2, Double insulation safety rating.
  • AC Auto-Ranging 400 amp digital clamp meter.
Check Stock

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

  • Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump.
  • Pressure line has a 5/8"-18 male inverted flare fitting at the pump end.
  • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting..
  • Features a -6AN to an 9/16"-18 O-ring fitting on the rack end.
Check Stock

Flixall Hose Clamps Stainless Steel- 60pcs Metal Clamps Assortment- Screw Driver- Durable Hose Clamp Kit with Adjustable Sizes- Automotive, Plumbing Use

  • [Excellent Grip] - With strong grip and high quality material these worm gear hose clamps can hold well onto the hose and pipes for a very long time. Different sizes are included in our clamp set so you never go out of options.
  • [Adjustable Size, Easy Replacement] - Never worry about fitting your hose on a smaller tap or sprinkler as measured perforation and evenly distributed holes allow clamp size to be adjusted according to your use. Moreover, if you don't find our product or packing up to the mark, feel free to contact us for a replacement, no questions asked!.
Check Stock

THKFISH Fishing Line Spooler Fishing Line Winder Spooler Fishing Accessories Adjustable Stable Portable Fishing Line Spooler with Clamp A-Long Style

  • STABLE STURDY AND POWERFUL: Fishing line spooler with clamp . Not easy to loose, fast and easy to entangle. Built-in anti-slip mat, the clip is more stable and not easy to loose. Clamp its very powerful and will hold up to the stress of the line pull. Please note that the reels and line are only for spooling reference, NOT INCLUDING in the package(The cloth bag is included in the package)..
  • MULTIPLE USE LINE SPOOLER: A most have for fisherman. Multiple uses, whether you are at home, boats, truck, or basically anywhere,you can easily take and use this fishing line winder. It is easily portable and can be mounted on anywhere that you can clamp it to. Clamps bottom, no limited by flat or smooth surfaces, and you will get a better hold to spooler by clamping it at the edge of desk, chair and so on..
  • ADJUSTABLE MAXIMUM THICKNESS: Maximum thickness of Five Style Line Spooler are all 2.44in/6.2cm. It is adjustable, make fishing more conveniently.  C-clamp that can attach to your table, workbench, tailgate, etc. Like a C-clamp, you spin the threaded rod to tighten the clamp onto your table. Fishing Line Winder makes fishing better!.
  • PRACTICAL 2 WAYS FOR USING: The two ways shows as the picture, you could the one way that you like. Double-headed fa....
Check Stock

O'SKOOL 4-Inch (Inside Diameter) to 2-1/4-Inch (Inside Diameter) Dust Collector Fitting Vacuum Tool Port Adapter

  • Includes: 4" to 2-1/4" Dust Hose Reducer Adapter Fitting x 1.
  • Durable ABS plastic end with 2-1/2" OD (outside diameter) and 2-1/4" ID(inside diameter) is perfectly suited for standard shop vacuum hoses..
  • Rubber boot(4" inside diameter ) and a hose clamp fit a 4" outside diameter power tool port..
  • ABS plastic port is tough and wear-resistant, which can extend the use time..
  • Rubber boot ensures tight fit, even variations in port size..
Check Stock