Top Power Of Motor 22kw

MXBAOHENG Pneumatic Paint Mixer 13-66 Gallon 2500RPM Pneumatic Mixer Portable Industrial Ink Coating Mixing Tool Machine, with 4-INCH Galvanized Impeller

  • 【Main Parameters】Power: 500W, Speed range: 2500RPM, Intake port: 1/4PT. The pneumatic paint mixer needs to be used together with air compressor. Suitable for Air compressor: power: above 3kw, working pressure: above 7kg/cm² (99.56PSI)..
  • 【High Quality】This handheld pneumatic mixer has high-quality stirring rod and stirring blade.
  • The mixing rod is corrosion-resistant, does not fade, and is easy to clean. The length of the stirring rod is 58CM/22.83inch, which can fully stir the pigment deposited at the bottom of the container.
  • the stirring impeller is corrosion resistant, acid and alkali resistant, removable, etc..
  • 【Heat Dissipation Function】This pneumatic paint mixer with porous design helps exhaust air and effectively protects internal working parts. The air intake from the air inlet drives the rotation of the fan blades to provide power for the machine, and then exits through the vent hole..
  • 【Cylinder Motor】This pneumatic mixer is equipped with a cylinder motor, powerful, low noise and high efficiency. The motor speed is adjusted by the rotary switch. The higher the air pressure, the faster the speed. Can work in harsh environment, such as inflammable and explosive, dust, heavy load, humid workplaces, etc..
Check Stock

Electrodepot 40 Amp 4 Pole Normally Closed Contactor, 110-120V Coil, Motor Load 20A, Lighting 40A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 mm x 6 in – 1 Piece with 2 Number 10 Screws

  • ...7 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and thickness 5mm (0.2”).
Check Stock

Coleman - 40 Amp 1 Pole 24v Coil Replacement Contactor C140A

  • BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated....
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ...t: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn out Can engrave the high hardness or metal.
  • DESCRIPTIONS】Industrial fit for engraving machine controller was designed system Waterproof design, very....
Check Stock

Single Cylinder Two Stroke Gasoline Toothless Saw 12 Inch Cutting Machine, 4.5kw Power Cutting Machine Concrete Cutting Machine Cutting Tools

  • ⚙️【PRODUCT SPECIFICATION】Material: Aluminum Alloy Box, Steel Protective Cover.
  • ⚙️【WIDE APPLICATION】 The Gas Power Cutter are used in fire fighting, municipal construction work, road and bridge construction and other motor and field work.
  • ⚙️【POWERFUL CUTTER】With 4.5kw Power, our Powerful all-around power cutter is ideal for cutting concrete and masonry in alteration, renovation and new construction work.
  • ⚙️【COMFORTABLE DESIGN】The features a compact design, low weight & correctly positioned handles to make the machine easier to handle. The comfortable handles provides more comfortable handling during long work shifts.
  • hold with both hands to effectively reduce vibration.
  • ⚙️【HIGH EFFICIENCY】This compact and efficient tool is powered by a 95 cc engine with a full 4.5kw for the most demanding concrete cutting.
  • The Power Cutting Machine is lightweight with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity.
Check Stock

Fisher Space Pen - Non-Reflective Military Matte Black M4B- Cap-O-Matic - Gift Boxed

  • 12 Volt DC Motor, input power 7. 7hp (5. 6kw) 24 Volt DC, input power 7. 7hp (5. 6kw).
  • Fully sealed with bolt pattern 11. 48" X 8" (164. 6 mm X 291. 6 mm) - Long Drum 8 bolts, 5/8"-11.
  • Steel Cable 1/2″ X 75′ (12. 7 mm X 24m).
Check Stock

Galapagoz Drill Paddle Water Cordless Kayak Canoe Boat Raft Light Weight Trolling Motor Fishing USA

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm that 10 times precision beyond normal spindle motor..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

Xilin Full Electric Powered Counterbalanced Stacker Material Lift 118\ Lifting Height 1100lbs Capacity

  • Full electric counterbalanced stacker with load capacity 1100lbs. | Mast tilt angle forward 1°,backward 3°. | Overall Length 78.8"，Overall width 33.3"..
  • Max lifting height : 118". | Width overall forks：8.6 "- 25.4 "..
  • One Truck Cost but with 3 Trucks’ Function：Power Pallet Truck | Light-Duty Stacker | Light-Duty Counterbalance Forklift..
  • High-torque 24V/ 0.65 KW drive and 2.2 KW lift motor offer 4-5 hours of operation..
Check Stock

Pentair 350105S Almond 3.2KW PMSM Variable Frequency Drive Motor Replacement IntelliFlo Inground Pool and Spa Pump

  • Variable frequency drive motor replacement.
  • Fits Pentair IntelliFlo VF, VS 3050 and VS-SVRS Inground pool and spa pumps.
  • Measures 22-1/2-inch length by 11-1/2-inch height by 9-1/4-inch width.
Check Stock

Parts-Diyer 50cc Bicycle Engine Kit 2 Stroke Bike Motorized Petrol Gas Motor Engine Kit for 26' 28' Mountain and Road Bike Cycle Motor Kit (Black)

  • ...ll switch, carburetor and other necessary parts, we make sure all our manufacturers comply Strict quality control guarantee measures and use the highest quality materials, high quality components, durable.
  • Fuel Efficiency: 2 Stroke engine kit is very affordable and fuel efficient, 124 – 155 miles per gallon, rated power: 1.15Kw/5000r/min (1.6hp/5000r/min), max power: 1.6Kw/6000r/min (3hp /6000r/min), fuel type: No. 90, lubricating oil: two-stroke gasoline engine oil (or 10W/40.10W/30 oil), fuel and oil mixing ratio: new group 16:1, 20:1 after running 500km.
  • Complete Installation Guide: Every bike engine kit comes with an easy-to-understand installation guide that walks you through the step-by-step installation, tuning and fueling of your brand new engine kit for the rest of your life.
  • Product Service: 50cc 2-Stroke high-power engine bicycle motor is suitable for mountain bikes, road bikes, gravel bikes, ATVs, etc. For more specifications, please check the product description, if necessary, please feel free to contact us Any questions about products or components.
Check Stock

Seeutek 80cc Bicycle Engine Kit 26" 28" Bike Bicycle Motorized 2 Stroke Cycle Petrol Gas Motor Engine Kit Upgrade with Speedoemter

  • chain length:110 links, 55 inches. Driving ratio:18: 01.
  • lubrication oil: motorcycle synthetic 2 stroke oil. Notes: Fuel Type:Gas 93# and please use premium quality oils to prolong engine life. And add some lubricant into the air cylinder before starting..
  • Horse power: 2.75 HP. Ignition type: CDI. Engine Type: Single cylinder, air-cooling, 2-stroke.
  • Chain Length: 110 links. Larger frame size requires drilling into bike frame and use of the universal face plate.Notes:If new carb leaking oil, take apart the bowl, bent down the claw a little down, leaking issues will be solved. And if no spark plug no spark, just remove the cap..
  • The engine air cylinder might take some time to adjust to the load. Thus to avoid possible complications for the motor, please limit the riding time to a maximum of 1 hour for the first few rides. Notes: After riding breaking time, the motor need to do maintenance, please check the maintenance routine in Page 15 of Instruction Manual..
  • For screw and bolts easily broken,we have upgraded premium qual....
Check Stock

Ingersoll Rand 308B Air Straight Die Grinder, 1/4\

  • POWER: Motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed..
  • Piped Away Exhaust Ready: These die grinders are compatible with “piped away” exhaust kits, so you can transfer exhaust away from you and your workspace..
  • DURABLE: Ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • RELIABILITY: Integral safety-lock throttle lever prevents accidental start up..
  • LIGHTWEIGHT: At only 1lb., the ergonomic composite housing protects this tool from cold air and offers greater operator comfort..
  • Built-in lubricating wick increases angle gear life.
  • Rear exhaust directs air away from the operator.
  • Powerful motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed.
  • Durable ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • Strong aluminum housing withstands tough operating conditions.
  • Small and lightweight design provides easy operation greater access to tight spots.
  • Easy-to-use, integral safety-lock throttle lever prevents accidental start up.
Check Stock