Top Power Steering Pump Seal Kit

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock

Small Block Chevy Serpentine System for 283 302 305 350 400 Engines- Power Steering and Alternator

  • Black Anodized Billet Aluminum Pulleys and Brackets CNC machined in the USA backed by our industry leading lifetime warranty!.
  • Works on 283 302 305 327 350 400 Engines With Long Water Pump.
  • Requires a Saginaw Power Steering Pump with Keyway Shaft and GM Alternator.
  • Kit Includes water pump pulley, alternator bracket, alternator fan, alternator pulley and cap, crank pulley, and power steering bracket with pulley. Alternator, Water Pump, and Power Steering Pump NOT included.
  • Don't settle for a cheaply made bracket that will flex during acceleration. Give your engine the strong American Made bracket that it deserves!.
Check Stock

TrackStar Turnigy 13.5T Sensored Brushless Motor 3040KV Roar Approved

  • Premium Material: The hydraulic steering helm comes with high-strength aluminum alloy material, which is lightweight, anti-aging, corrosion-resistant,....
  • Optimal Hose Fitting: The adjustable stainless steel O-ring fittings will simplify the installation process and allow for simple reorientation after....
  • Considerate Details: The hydraulic helm pump is equipped with the replaceable shaft seal, the built-in lock valve, relieve valve, and air pocket.....
  • Complete Accessories: The hydraulic steering pump has a complete accessories kit for durable structure. It includes ball bearing piston race,-5 ORB....
  • Wide Application: This outboard helm pump is suitable for boats rated to a maximum of 300 HP. It can be used in mechanical/manual steering for yachts,....
Check Stock

Power Steering Pump W/Bracket & Chrome Pulley, Chrome Saginaw Style, Compatible with Chevy SBC

  • Kit includes: (1) New Chrome Saginaw "Key-Way" Power Steering Pump, (1) Chrome Steel Pump Bracket Kit, (1) Chrome Groove Pump Pulley(5-3/4" diameter), (1) Chrome Power Steering Pump Cap.
  • 1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare.
  • A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head..
  • A 3 groove crank pulley may be required for use with short water pumps.
  • Female 5/8"-18 inverted flare fitting for the high pressure outlet.
Check Stock

TRIAX Full Synthetic Power Steering Fluid Compatible with Honda & Acura,  Asian Vehicles, OEM Grade, Fill for Life (1 Quart)

  • FILL FOR LIFE - Specifically designed to be compatible with Honda and Acura vehicles to last well over 20,000. It will maximize the power steering system life and fluid for precise steering year-round..
  • TRUE ALL-SEASON FLUID - High VI Index allows minimal viscosity changes in both very hot and very cold climates.
  • allowing smooth, precise steering under all conditions down to - 50 F. YOU WILL NOT get the "squishy" feeling in hot weather and squeaking / lazy steering in cold weather..
  • UNIQUE CHEMISTRY - Facilitates steering pump life far beyond regular power steering fluids which prevents pump seizing and wear..
  • MAXIMUM SEAL LIFE - Built-in additives help rejuvenate seals and gaskets to prevent cracks and leaks..
  • ALL ASIAN VEHICLE COMPLIANCE - Compatible with all Asian vehicles, such as Nissan, Idemitsu, Toyota, Kia, and others..
Check Stock

Powerbuilt Power Steering and Alternator Pulley Remove and Install Tool Set, Replace Vehicle Steering Pump, Car Repair Tools, Storage Case - 648605

  • Made to be the most reliable tools in the market today.
  • Tool set for removal and installation of power steering pump and alternator pulleys.
  • For use on most power steering pump pulleys.
  • Includes special installer adapters, puller assembly with thrust bearing, jaw and sleeve.
  • Kit 20 includes 14-Piece for removal and installation of the power steering pump and alternator pulleys.
Check Stock

AAE 5618N New Power Steering Pump

  • New Power Steering Pump, not remanufactured.
  • AAE new Power Steering Pumps carry a 1 year limited warranty.
  • Every unit is tested under load to ensure proper seal seating so the unit remains leak free.
  • Computer aided testers are used to ensure that steering 'feel' is matched to the original equipment part so your car steers like it did when new.
  • Quality control inspected, tested and final packaging in the USA to provide the highest standard in product assurance.
Check Stock

Mityvac MVA670 Power Steering Adapter Kit Removes Trapped Air from Power Steering Systems Includes Three Adapters – One Universal as Well as a Ford and GM Version MITMVA670

  • The folllowing adapters are included: MVA662 Ford Power Steering Adapter.
  • Featuring a robust design and construction, all three adapters include an inline, barbed connection for a 1⁄4 in. internal diameter hose..
  • These adapters form an airtight seal in the neck of a vehicle’s power steering pump allowing for air evacuation..
  • Designed to function with Mityvac hand pump models MV8000 and MV8500 as well as most other brands of hand-vacuum pumps..
  • The MVA665 is available separately and can be interchanged with the inline connector on MVA661 and MVA662 for applications with limited overhead....
Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

  • 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
  • Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
  • Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
  • Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
  • Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check Stock

Power Steering Pump Fit For 2003 2004 2005 Honda Accord 2.4L Power Assist Pump Replace # 56110-RAA-A01 56110RAAA03 96-5341 5776 990-0656 PSP1006 21-5341

  • High QualityThe power steering pump is exact OE manufactured and can be replaced directly with the original parts in your vehicle. It is made of high quality material and maintain a good strength to give the parts long time performance. It can be installed easily without using complicated tools..
  • FunctionThe power steering pump is used to converting power to the power steering fluid from the reservoir into the steering gear and keeps the wheels running in good conditions. Once you noticed that your vehicle wheels runs unsmoothly, steering wheel slow to respond, stiff steering wheel and make loud noise, then you need to double check the power steering pump and get it replaced if it is defective..
  • CompatibilityThis power steering pump fits for 2003 2004 2005 Honda Accord 2.4L. And please double check the fitment on the above fitment bar or on the following products description..
  • Replace OE Part# 215341, 965341, 56110RAAA01, 56110RAAA03, 990-0656, PSP1006. This power steering pump will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • WarrantyThis power steering pump comes with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund. All we wa....
Check Stock

Black Saginaw Style Power Steering Pump w/Single Groove Pulley, Fits Chevy BBC SBC

  • Kit includes: (1) New Black Saginaw "Key-Way" Power Steering Pump, (1) Black Single Groove Pump Pulley, (1) Black Power Steering Pump Cap.
  • 1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare.
  • Will mount to most Chevy & GM Engines with the correct mounting bracket..
  • Female 5/8"-18 inverted flare fitting for the high pressure outlet.
Check Stock