Top Power Supply Device

DC Power Supply Variable, 30V 10A Bench Power Supply with Memories, Output Switch, Adjustable Switching Regulated Power Supply with 4-Digits Display, Encoder Adjustment Knob

  • High Precision with 4-Digit and Power Display: Kungber 30V 5A DC benchtop power supply is a professional power supply regulation device that has a high resolution of 0.01V and 0.001A. You can easily tune it within 0-30V and 0-5A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
  • Reliable and Safety: Many safety measures are adopt in Kungber DC bench power supply- Grounding wire, Leakage protection, Therma....
Check Stock

Patioer 4 Channels Mini USB Audio Mixer Amplifier Console bluetooth Recording Phantom

  • Built in bluetooth function, can work with electronic digital devices with a audio interface, like smartphone, tablet, laptop, pc. Wirelessly stream music from your device directly to your mixer..
  • Sound card function, connect the mixer to the PC by a USB data cable, then you can directly process computer vocal music..
  • USB Interface, Connect your external U disk, computer PC, flash drive or Bluetooth device to mix and use..
  • Lightweight and Portable, can be directly connected to the PC’s USB port power supply, suitable for indoor and outdoor work.Built-in 48V phantom power supply for condenser microphone direct power supply..
  • Perfect for stage performance, family K songs, network anchors, music creation, etc..
Check Stock

Differential Amplifiers 200 MHz (1 piece)

  • Power supply EMI filter is a kind of reactance-type low-pass filter, installed at the power supply input of electronic equipment..
  • It can inhibit noise transmitted through grid power cable, and can inhibit high-frequency interference signals generated by the electronic device itself..
  • High quality imported components provide obvious filtering effect..
  • EMI has become a must have device installed in electronic equipment..
  • Widely used for precision measuring instruments, building automation, precision machinery, elevator lifting equipment, automated system, calculator inverter office equipment, servo system inverter equipment, frequency conversion equipment, lighting equip.
Check Stock

pigtone Guitar Effect Pedal Power Supply 10 Independent DC Outputs Suitable for 9V 12V 18V 100mA 400mA Short Circuit and Over Current Protection PD-03

  • ♪ It can supply power to multiple guitar pedals at the same time, no current noise, input: DC18V1A, output: 6x 9V 100mA, 2x 9V 400mA, 1x 12V 100mA, 1x 18V 100mA..
  • ♪ Short-circuit/over-current protection: If a short-circuit device is inserted in the socket or the current is overloaded, the power supply will be stopped. Once the device is disconnected from the DC power source, power to the outlet will be restored. It can protect your pedal from damage..
  • ♪ Material: This pedal power supply is made of high-quality aluminum alloy, strong and durable, not easy to break, can be used for a long time, and is easy to carry..
  • ♪ Packing: 1 x PD-03 guitar pedal power supply, 1 x power adapter, 10 x 60 cm cable, 2 x polarity conversion cable, 1 x user manual..
  • ♪ pigtone is a brand and professional manufacturer of guitar pedals and pedal power supplies. We have our own production and R&D factories, engineers and guitarists. If the product you received is not ideal, please contact us for a solution..
Check Stock

USA US Flag Patriotic 4th of July America T-Shirt

  • ...Z, DC 12V 1Amp output, 12W max wattage. Compatible with DC 12V 100mA, 200mA, 300mA, 400mA, 500mA, 600mA, 700mA, 800mA, 900mA, 1000mA, 1A devices.(Please pay attention to the current and voltage of the product before purchasing. Buying a product with the wrong voltage or current may damage your device)..
  • 12V 1A power supply plug size: 2.5mm inside diameter, 5.5mm outside diameter ( Compatible with 5.5 * 2.1mm). Please pay attention to the size of the plug, ⚠️it can only be used for devices with 5.5*2.5mm or 5.5*2.1mm sockets!.⚠️ Internal polarity (+), external polarity (-), irreversible polarity..
  • Applications: CD players, LED strips, light boxes, small appliances, routers, juicers, coffee machines, security monitoring, keyboards, PSPs, etc. (Only some products are listed here, as long as the voltage, current, plug size and plug polarity are compatible with your device, you can use it, except for lithium battery products).
  • Warm Tip : The DC power cord is approximately 2.95 inches/90 cm long. Pay attention to the length of the DC cable, make sure it is long enough to connect the power supply and your device. (Indoor use only!).
  • 12V 1A adapter protection: Overcurrent protection, overvoltage protection, overcharge protection, power supply temperature....
Check Stock

Traovien SATA Cables, Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard 18AWG - 1FT

  • Allowing you to connect an additional PSU to your ATX motherboard.
  • Both PSU will be powered up by one single motherboard.Use a second PSU to power multiple graphics cards.
  • Compatible with 24 pin and 20+4 pin ATX motherboards (1x 24 pin(20+4) male port and 2x 24 pin female ports).
  • Designed for intense Gamining and BitCoin Mining.
  • Material: 18AWG . Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
  • Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard sata cable 24 pin to 2420+4) pin sata cable JBingGG Dual PSU Power Supply 24 Pin (20+4) Adapter Cable for ATX Motherboard 12-inch ( 30cm ) (24 pin to 24(20+4) pin).
  • Note: Be sure to recognize the direction when inserting the cable!!! Dont insert the cable backwards or insert the wrong position to prevent the device from being burned!! When inserting the cable, hold the socket of the device before inserting the cable to avoid excessive force to insert the socket pin..
  • How to use: Plug the 24PIN of the main power supply into the female plug and plug the other end to the motherboard, and plug the secondary power supply into another 24PIN female plug to switch the power at the same time..
Check Stock

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

  • Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
  • This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
  • This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
  • This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
  • Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check Stock

Kungber DC Power Supply Variable, 30V 5A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads

  • High Precision with 4-Digit and Power Display: Kungber 30V 5A DC benchtop power supply is a professional laboratory power supply regulation device that has a high resolution of 0.01V and 0.001A. You can easily tune it within 0-30V and 0-5A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
Check Stock

MokerLink 11 Port Gigabit PoE Switch with 8 PoE+ Port, 2 Gigabit Uplink, 1 SFP Port, 120W AI Detection, Qos, Fanless Metal Plug & Play Unmanaged Network Switch

  • 11 Gigabit PoE Ports: Includes 8 Gigabit POE ports, 2 Gigabit Uplink and 1 SFP Port, all ports support gigabit rate(1000Mbps), With excellent data exchange performance, the SFP port can be connected to optical fiber, suitable for long-distance transmission greater than 100 meters..
  • High POE Power: Maximum support 120W high output power, built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W. *Please note: not support passive 24V PoE.*.
  • Plug & Play, AI Detection: Just plug in the power cord, connect the ethernet cable to the PoE device, can be used without configuration. AI intelligent detection, automatic detection of port data, if disconnected, automatically restart the port device, ensure stable operation and worry-free maintenance.
  • Qos: The port 1-2 support Qos function, can connect important network device to these 2 ports, when network congestion occurs, it will be protected first to prevent data loss.
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks etc. Any questions please contact us, we will provide the best support..
Check Stock

Cudy FS1006P 6-Port 10/100M PoE Switch 60W, 4 PoE Ports, CCTV Mode (Transmit Distance to 250m at 10Mbps), PD Detection,Fan-Less, Steel Case, Desktop and Wall-Mount, 802.3at / 802.3af

  • 6 Ethernet ports, 4 port PoE+ with 60W total power budget, 2 port uplink ideal for connecting NVR and Internet. Compact Design with Internal Power Supply.
  • Power over Ethernet with 802.3at and 802.3af compliant. Power-Over-Ethernet (PoE) and PoE+ options available for powering IP Security Cameras, VoIP phones, wireless access points, and other PoE-powered devices..
  • CCTV function support remote power and data feeding up to 250m long distance, which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
  • With PD detect function, this PoE switch support auto detect power device, will not burned non-standard PoE device or normal PoE switch. Pin assignment: alternative 1/2 (+), 3/6 (-)..
  • High Quality chipset inside: Use high quality POE chip to ensure stable operation of the product.Plug & play: Mode A alternative 1/2 (+), 3/6 (-) power supply, simple set up with no software or configuration needed..
Check Stock

Kungber DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads

  • High Precision with 4-Digit and Power Display: Kungber 30V 10A DC benchtop power supply is a professional power supply regulation device that has a high resolution of 0.01V and 0.01A. You can easily tune it within 0-30V and 0-10A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
  • Reliable and Safety: Many safety measures are adopt in Kungber DC bench power supply- Grounding wire, Leakage protection, The....
Check Stock

Kungber DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads

  • High Precision with 4-Digit and Power Display: Kungber 30V 10A lab DC benchtop power supply is a professional laboratory power supply regulation device that has a high resolution of 0.01V and 0.01A. You can easily tune it within 0-30V and 0-10A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This lab DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
  • Reliable and Safety: many safety measures are adopt in Kungber lab DC power supply - Grounding wire, Leaka....
Check Stock