Top Powered Gondola

Open End Basket Holding Clips to Hold Wire Baskets on Gondola Shelf Upright, Left & Right Clips, 5 Pairs

  • Use these open end basket clips to hang wire open end baskets on your gondola shelving units. Note: These will only fit on Madix or lozier gondola shelf uprights..
  • These clips are sold in pairs. Each unit consists of one left clip and one right clip. Simply place the clips into the hole on your gondola shelf upright (also known as uprite). Note: These will only fit on Madix or lozier gondola shelf uprights..
  • They are made out of an extremely heavy duty metal and come in a zinc finish which look great when paired with chrome wire open end baskets..
  • The clips can hold up to 500 lb per 2 clips, however most open end baskets have lower weight limits. Make sure to verify the weight capacity of your baskets prior to loading the shelf..
Check Stock

Wire Shelf Divider for 16\D Lozier & Madix Gondola Wire Shelving, Chrome 3\H

  • This metal wire shelf divider is 3 inches high and is designed to be used on a 16 inch deep gondola shelf to better organize products, prevent items from tipping over, improve the shopping experience and simplify restocking..
  • GOOD FOR LOZIER OR MADIX SHELVES: Attaches to most 16-inch-deep gondola shelves by Lozier and Madix. They attach to the shelf by clipping onto the shelf through the holes on the top of the shelf. Dividers work best when used in a set and/or combined with a matching front fence..
  • Allows for improved merchandising of products on retail shelves, even in a tilted or downward slope setting, since products won't spill out..
  • The see-through design of the gondola shelf fence allows for optimal viewing of your products with no obstruction so that your customers will not have to pull each item from the shelf in order to view it..
  • Chrome finish makes this divider suitable for almost any color gondola shelf..
Check Stock

Wire Shelf Divider for 19\D Lozier & Madix Gondola Wire Shelving, Black 6\H

  • This metal wire shelf divider is 6 inches high and is designed to be used on a 19 inch deep gondola shelf to better organize products, prevent items from tipping over, improve the shopping experience and simplify restocking..
  • GOOD FOR LOZIER OR MADIX SHELVES: Attaches to most 19-inch-deep gondola shelves by Lozier and Madix. They attach to the shelf by clipping onto the shelf through the holes on the top of the shelf. Dividers work best when used in a set and/or combined with a matching front fence..
  • Allows for improved merchandising of products on retail shelves, even in a tilted or downward slope setting, since products won't spill out..
  • The see-through design of the gondola shelf fence allows for optimal viewing of your products with no obstruction so that your customers will not have to pull each item from the shelf in order to view it..
  • Matte black finish makes this divider suitable for most color gondola shelfs and retail displays..
Check Stock

Wire Shelf Divider for 16\D Lozier & Madix Gondola Shelves Wire Shelving, Chrome 6\H

  • This metal wire shelf divider is 6 inches high and is designed to be used on a 16 inch deep gondola shelf to better organize products, prevent items from tipping over, improve the shopping experience and simplify restocking..
  • GOOD FOR LOZIER OR MADIX SHELVES: Attaches to most 16-inch-deep gondola shelves by Lozier and Madix. They attach to the shelf by clipping onto the shelf through the holes on the top of the shelf. Dividers work best when used in a set and/or combined with a matching front fence..
  • Allows for improved merchandising of products on retail shelves, even in a tilted or downward slope setting, since products won't spill out..
  • The see-through design of the gondola shelf fence allows for optimal viewing of your products with no obstruction so that your customers will not have to pull each item from the shelf in order to view it..
  • Chrome finish makes this divider suitable for most color gondola shelfs and retail displays..
Check Stock

Bachmann Trains - Trailblazer Ready To Run 60 Piece Electric Train Set - N Scale

  • Complete Ready To Run 60 Piece Freight Train Set.
  • Powered by a 4-6-0 Steam Era Locomotive and Tender with Operating Headlight.
  • Box Car, Gondola Car, Single-Dome Tank Car, Old-Time Caboose, Railroad Signs, Street Signs, and Telephone Poles.
  • 34" x 24" Oval of Nickel Silver E-Z Track , Power Pack and Speed Controller.
Check Stock

Bachmann Trains - Freightmaster Ready To Run 60 Piece Electric Train Set - N Scale,Silver

  • Complete Ready To Run 60 Piece Freight Train Set.
  • Powered by a EMD GP40 Diesel Locomotive with Operating Headlight.
  • Flat Car with Container Load, Gondola Car, Plug-Door Box Car, Wide-Vision Caboose, Railroad Signs, Street Signs, and Telephone Poles.
  • 34" x 24" Oval of Nickel Silver E-Z Track , Power Pack and Speed Controller.
Check Stock

Bachmann Trains - Roaring Rails DCC Sound Value Ready to Run Electric Train Set - N Scale

  • Complete Ready To Run Train Set with DCC Sound Locomotive.
  • Powered by a DCC Sound-Equipped GP40 Diesel Locomotive with Operating Headlight.
  • Box Car, Gondola Car, and Wide-Vision Caboose.
  • 34" x 24" Oval of Nickel Silver E-Z Track, Power Pack and E-Z Command Controller.
Check Stock

3\ H Acrylic Front Fence Lip for Gondola or Wood Shelf with 1/4\ Holes, Clear, 48\ L, 20 Pack

  • Place our acrylic shelf fence on your gondola unit to prevent your items from slipping off..
  • Our gondola shelf acrylic fence can be used on both flat and angled gondola shelves with round holes..
  • This listing is for the acrylic fence ONLY. Dividers, bolts, shelves & units are NOT included..
  • These can also be screwed into wooden shelves. No screws are included in this order..
  • It is 3 inches high, 48 inches long and comes in a clear finish..
Check Stock

Bachmann Trains 67352 GE Dash 8-40CW Sound Value Equipped Locomotive - Santa Fe #879 - N Scale, Prototypical Colors

  • Powered by a EMD FT Diesel Locomotive with Operating Headlight.
  • Open Quad Hopper Car, Gondola Car, and Off-Set Cupola Caboose.
  • 36" Circle of Snap-Fit E-Z Track, Power Pack and Speed Controller.
Check Stock

Bachmann Trains - Rail Chief Ready To Run 130 Piece Electric Train Set - HO Scale

  • Complete Ready To Run 130 Piece Freight Train Set.
  • Powered by a EMD GP40 Diesel Locomotive with Operating Headlight.
  • Open Quad Hopper Car, Gondola Car, Steel Reefer Car, Off-Set Cupola Caboose, Signal Bridge, Miniature Figures, Railroad Signs, Street Signs, and Telephone Poles.
  • 47" x 38" Oval of Snap-Fit E-Z Track, Power Pack and Speed Controller.
Check Stock

Lionel Santa Fe Super Chief LionChief Set with Bluetooth Capability, Electric O Gauge Model Train Set with Remote

  • Powered by a F7-A Diesel Locomotive with Operating Headlight.
  • Box Car, Steel Gondola Car, Off-Set Cupola Caboose.
  • 24" Circle of Nickel Silver E-Z Track , Power Pack and Speed Controller.
Check Stock

Metal Flipper Nut, Warehouse Rack & Gondola Shelving, Add Signs to Slot, 100 Pack

  • Use this clever flipper nut to mount sign holders, aisle signs, aisle violators and displays directly to the shelf slots in gondola shelving and pallet rack uprights. Can be used with both retail gondolas and warehouse racks to attach signage..
  • Insert the flipper or metal tab into the teardrop hole on the warehouse rack upright or into the shelf slot on gondola shelving uprights. Attach your signage or display and tighten the screw. As the flipper rotates it will catch the interior wall of the rack upright or the gondola shelf upright. When it hits the internal wall the flipper stops spinning and allows you to tighten the screw all the way..
  • Flipper nut is a 1/4" - 20 x 1.25"L threaded screw with a metal flange nut that fits into the teardrop or slot holes on most warehouse rack and pallet rack uprights. It will also work on most gondola shelving slotted uprights. It is used primarily to attach sign holders or retail displays to the upright of the rack..
  • Great for use by retailers to add cross merchandising displays, clip strips or other sign holders or by operations managers in factories and distribution centers to add warehouse rack label holders, warehouse aisle signs, location signs and inventory control signs..
  • Flipper nut is 100% steel metal constr....
Check Stock