Top Ppr Plastic Ball Valve

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • ...ual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be wear-resistant to assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart..
Check Stock

ROYHOO 4PCS 1/2 Inch Float Ball Valve Plastic Water Float Valve Mini Plastic Float Valve with Adjustable Arm for Automatic Water Level Control of Water Tank

  • Material: the body of the body is made of quality ABS plastic material, which is featured with good heat resistance and impact resistance of PC resin, not corrode or rust. The float is made of PE material with nice stability. The valve core is made of silicone material which is non-toxic and odorless, safe for you to use..
  • Easy to use: you can have a automatic water level control by adjusting the angle which is formed by the float and the valve body, if the surface of water contacts the float, the water inlet switch will be automatically closed..
  • Quantity and measurement: we provide you with a total of 4 pieces 1/ 2 inch float ball valves, the valve total length is approx. 7.87 inch and a float length is about 3.74 inch, you can install different numbers of the water valves according to the size of the tank or pool..
  • Suitable condition: the float ball valve can be adapted to water temperature which ranges from 0 to 70 degrees Celsius, 0.01-0.8MPA water pressure is applicable, featuring with good control of the water inlet, will give a nice using experience to you..
  • Multifunction: our plastic water filter float ball valves are suitable for a variety of occasions, such as small swimming pools and storage tanks at home, more numbers of water valves should b....
Check Stock

Showerhead Shut Off Valve with Stainless Handle 304 Stainless Steel Mini Ball Valve 1/2 Female X Male NPT Thread Water Flow Control Valve Regulator Chrome Shower Head Flow Control Valve 1

  • FITMENTS: 1/2'' standard connections, NPT- female and male, compatible with the most common showerhead connectors in the North America..
  • FUNCTIONS: This stainless steel ball valve use as showerhead shut off valve, RV shower shut off valve or water saving adjustable valve, which also widely used at home, bathroom, kitchen, RV, Motorhome, etc..
  • RELIABLE & LEAKPROOF: This shower shut off made by one piece construction and has a blow-out proof stem to reduce leakage and valve damage. The maximum operating temperature of this shower on off valve is 325 degrees F..
  • DURABLE MATERIAL: This shower head shut off valve made of 304 stainless steel body and ball with much higher performance (high heat-resistance, high corrosion resistance and pressure-resistance), more durable and harder than the ordinary Brass and Plastic one. Stainless steel valve cartridge can be operated up to 250 000 times switching cycles..
  • EASY TO USE: A long stainless handle and on/ off switch with quarter are designed on this shower shut off valve, which made the nozzle easy to turn and control the water flow easily!.
Check Stock

Libraton PVC Pipe Cutter, Up to 1-5/8\

  • Premium Set: PVC cutter*1 & replacement blade*3.
  • Wide Application: The PVC cutter is suitable for most plastic pipes, e.g. PVC pipe, PEX pipe, PPR pipe.
  • Working Efficiency: This plastic cutter equipped with ratcheting drive technology and arch angle design to greatly save your strength when cut pipes.
  • Quick Change: You can quick change the blade replacement easily within 10 seconds without any other tools.
Check Stock

COOLWHEEL Bicycle Presta and Schrader Valve Adapter - 15 Pcs Bike Brass DV AV SV Tire Valve Inflator Adapters Set,Ball Pump Needle Inflation Devices & Accessories for Bike Tire Air Compressor

  • PREMIUM QUALITY - These valve adapters are made of solid brass & ABS plastic with threads,the rubber ring gasket will not leak easily, which is strong and durable for long term of use..
  • PORTABLE TO CARRY - The valve adapters take up very little space and very convenient to carry. You can place them in any backpack or pockets when riding and will not easy to lose..
  • EASY TO USE - Convenient to install and use, kids can also use the tapered nozzle for inflatable toys and balloon easily.These are ideal daily tool for most family to bike tire valve pumping, sport balls and other inflatable equipment..
  • VALVE ADAPTOR KIT - The 15 Pcs various sizes and specifications of bike inflator pump kit including 6 x DV/SV bike tire valve adapters, 2 x AV valve adapters, 2 x SV valve adapters, 2 x ball pump metal needles, 1 x solid brass tapered inflatable nozzles, 2 x black ABS tapered inflatable nozzles..
  • WIDE APPLICATION - These are suitable for mountain bikes, road bikes and stationary bicycles with Presta valve tubes, also can be used for inflatable toys, swim ring, balloons, sport balls such as basketball, football, volleyball, rugby, yoga ball,etc..
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • 【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
  • 3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock

DERNORD 1PC Type Stainless Steel Ball Valve 0.5 NPT Standard Port for Water Oil and Gas

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinly insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need....
Check Stock

75mm IBC Tote Tank Butterfly Valve Taps Water Adapter IBC Tank Water Container

  • 75mm (DN50) Ball Valve- Versatile as chemical process and acid, liquid storage buckets, tanks, container outlet control valves. This IBC tote adapter comes with coarse S75x6 thread with a diameter of 2.95 inches (75mm) . Please note that this IBC tote fitting is coarse thread with 6 mm pitch (distance between the threads)., NOT fine thread.Please check before purchase..
  • DURABLE and HEAVY DUTY-Made of premium plastic materialc and high density polyethylene, this adapter is acid and alkali resistant. It can be used for 3500 times repeatedly. Super durable for long time use..
  • QUICK and EASY INSTALLATION-Come as completed adapter. Just connect to the IBC/Water tank and you can Use it..
  • VERSATILE and NO-LEAKAGE-used for plastic container outlet control to prevent liquid from splashing around. Supported by strong silicone gasket, never worried about leakage..
  • Packet Included: 1x Assembled DN50(75MM) Ball Valve, 1 year warranty.
Check Stock

Shower head Shut Off Valve ,Water Flow Control Valve,Stainless Steel Valve NPT Thread(1/2\ Female X 1/2\ Male)

  • All parts of shower flower control valve are made of high-quality stainless steel, (stainless steel body, stainless steel handle, stainless steel ball) stronger and more corrosion resistant than brass and plastic..
  • The stainless steel water flow control valve is designed with a single lever. It can be turned on and off by only turning 90 degrees. Even if the hand is full of foam, the water flow can be easily adjusted and closed..
  • The 1/2" standard NPT thread can match most shower pipes and shower heads in the United States..
  • This stainless steel ball valve can be installed on hand showers, shower hoses, and pipes. Widely used in at home, bathroom, kitchen, RV, etc..
  • Good after-sales service: If you have any questions, please contact us for a refund or replacement..
Check Stock