Top Ppr Plastic Tube

Multi Angle Miter Shear Cutter Hand Tools,45-135 Degree Adjustable Angle Scissors Trim Shears Tools

  • Designed to cuts tile trim, PVC piping, quarter round, tack strip and other light materials..
  • Suitable for cutting PVC PPR PE plastic pipe, timber strips, wire, ect. Can't cut hard wood..
  • MULTI DEGREE: The sharp blades have a cutting angle of 45, 60, 75, 90, 105, 120, 135 degrees, allowing you to freely cut differently shaped wire slots....
  • HIHG QUALITY: Sturdy steel frame with plastic cover handle for comfortable diagonal cutting, not suitable for cutting metal and stainless steel..
  • Non-slip ergonomic handle, time and labour saving, easy to cut..
Check Stock

HAUTMEC Multifunction Ratchet-type Tube and Pipe Cutter, One-hand Fast Pipe Cutting Tool for Cutting Up to 1-5/8 inch, 3-in-1 Tubes, Wire and Trunking cutter HT0257-TC

  • ...t mechanism for smooth and faster cutting operation by one hand with no return of the blade during cutting, making cutting more labor-saving and efficient. Firmly securing the blade, the automatic locking mechanism protects users from the rebound of the blade during the cutting.
  • 【3-in-1 Tool Function】Serves as a plastic tube cutter, wire-cutter and trunking-cutter. Material cut: PVC, PP, PE, PER, PEX, ABS, PEHD, CPVC, PPR, PB, multilayer with an outer diameter below 42mm. Integrated wire-cutter: max Ø: 12 mm, max cross section: 4G2.5 mm². Integrated electric trunking cutter: maxi 25 x 12.5 mm (PC 42). It is an essential cutting tool for home handymen, plumbers, electricians, and vehicle mechanics.
  • 【20% Labor-saving Blade】Equipped with a V-shaped pipe blade with teflon coating, this pipe cutters boasts extremely smooth sliding, rust resistance and durability. On average, the cutting load is reduced by 20% versus with a blade with a typical coating. Heat-treated blades are not easy to rust or break and stay sharp in the harshest environments. Tool-free blade change is available. See ASIN: B0B5ZYBR1C.
  • 【Ergonomic Handle】The ergonomic soft-touch handle features soft coating, which is non-slip, wear-resistant and provides extra comfort. The shap....
Check Stock

PSW TRADE SUPPLIERS LTD Plastic Pipe Cutter for 1-5/8-inch Plastic Pipe, PVC, Rubber Hose

  • Plastic pipes and tubes pipe-cutting tool for pipes 1-5/8 inches in diameter.
  • Pipe cutter with the rubberised handles for non-slip, secure handling and a safety lock lever to protect it from unauthorised use by children.
  • Automatic, controlled opening of blade at the release of lever lock. The spring-loaded ratchet wheel remains in place, preventing the cutters from closing.
  • The thick and sharp blade is made of high-quality stainless steel, with high hardness and high shear force and spring loaded ratcheting wheel.
  • Suitable for all types of plastic pipes and tubes including PVC, PPR, PEX pipe, PE and rubber hose.
Check Stock

90 pcs, 90/180/360 Angle Sprinklers Miniature Garden Lawn Water Spray Atomization Sprinkler Nozzle Irrigation System Plant Waterer Garden Irrigation Sprinkler

  • It is not easily deformed, reliable operation and long service life..
  • The spray head angle of rotation: 90°,180°,360°Simply to install into PVC/PPR/PE pipe..
  • Used for cooling, watering, humidification, and dust removal..
  • Suitable for agriculture, lawn, garden, terrace, etc..
Check Stock

Multi Angle Miter Shear Cutter 45-135 Degree Adjustable Angle Scissors Trim Shears Hand Tools for Cutting Soft Wood Plastic PVC and Other

  • Sharp Enough, Ideal For Cutting Chamfers, Round Molds, Trunking And Pvc Strips, Rubber Gaskets, Molding And Weatherstrip.Recommanded material thick is....
  • Sturdy Steel Blade, Shape Blade And Ergonomic Plastic Handle, Comfortable Cut, No Hand Fatigue For Long-term Use,not Suitable For Cutting Metal And....
  • The Cutting Angle Is 45°-135°, Which Can Be Cut Into Different Shapes Of Wire Grooves As Needed..
  • For Cutting Pvc Ppr Pe Pipes, Branches, Wires, Etc.made Of High Quality Plastic And Stainless Steel For Durability..
  • Similar To A Garden Shear, The Built-in Fence Allows You To Cut Miter Joints Quickly, Easily, And With Accuracy..
Check Stock

Milwaukee 48-22-4041 Iron Carbide Core Large-Looped Straight Jobsite Scissors w/ Onboard Ruler Markings and Index Finger Groove (2 Pack)

  • Sharp Enough, Ideal for Cutting Chamfers, Round Molds, Trunking and Pvc Strips, Rubber Gaskets, Molding and Weatherstrip.recommanded Material Thick is Below 1/8" (3mm)..
  • Sturdy Steel Blade, Shape Blade and Ergonomic Plastic Handle, Comfortable Cut, No Hand Fatigue for Long-term Use,not Suitable for Cutting Metal and Stainless Steel..
  • The Cutting Angle is 45°-135°, Which Can Be Cut into Different Shapes of Wire Grooves As Needed..
  • For Cutting Pvc Ppr Pe Pipes, Branches, Wires, Etc.made of High Quality Plastic and Stainless Steel for Durability..
  • Similar to a Garden Shear, the Built-in Fence Allows You to Cut Miter Joints Quickly, Easily, and with Accuracy..
Check Stock

FUATY 3/4” NPT Plug Male Thread PPR Pipe Plugs and Caps Garden Irrigation Tubing Stopper Drain Plug Compatible with RV Irrigation Water Supply Lines

  • TYPE: 3/4 Inch NPT Male Thread Pipe End Connector Plugs.
  • MATERIAL: Made of quality PPR, corrosion resistance, high strength, and less weight then metal ones.
  • FUNCTION: Plug for closing the end of a pipe or fitting, helps keep dirt out on the line.
  • And it is also a perfect product to winterize outdoor pipe....
  • APPLICATION: Great for agriculture, lawn, garden, patio, greenhouse, swimming pool, misting fog cooling, irrigation, watering, humidification, balcony....
  • PACKAGE INCLUDE: 5Pcs Garden Irrigation Male Threaded PPR End Cap.
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 600RPM Gear Motor with Encoder for Robotics

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 120 Pulses Per Revolution: Gear Reduction Ratio: 1/10, Each Loop Output Pulses: 12PPR 10*12=120PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Bemonoc Encoder Metal Gearmotor 12V DC Low Speed 60 RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 1176 Pulses Per Revolution: Gear Reduction Ratio: 1/98, Each Loop Output Pulses: 12PPR 98*12=1176PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

DAOKI 10PCS Rotary Encoder Module KY-040 Brick Sensor Switch Button Development Board with 10PCS 15×16.5mm Knob Cap, Dupont Cable for Arduino AVR PIC

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20, Each Loop Output Pulses: 12PPR 20*12=240PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Induzeug Pipe and PVC Cutter for Cutting 1-1/3\

  • 【Ergonomic Ratchet design】The professional pipe cutting adopts self-locking ratchet design. The design to cutting operation with one hand, The handle adopts the principle of leverage, which makes cutting more labor-saving. Prevent rebound design with safety of users..
  • 【Blade durable】The high-quality manganese steel blade is adopts Japanese Teflon coating process strong shearing force, high hardness, sharp blade, with anti-rust coating, increases the service life..
  • 【Ergonomic handle easy to use】The aluminum alloy material and the handle rubber wrap the handle, which increases the anti-skid and wear resistance of the handle, and also improves the comfort of use.There is a buckle at the bottom of the handle, which is convenient to open and use with one hand. The handle locks the safety lock when not in use, saving space and preventing accidental injury..
  • 【Wide range of multipurpose】The Induzeug Pipe Cutter simple to use and easy to operate, for cutting most plastic (PVC, UPVC, PPR, PEX, PE, rubber hose) and multilayer pipes. You can choose the corresponding size Pipe Cutter, cut for 1-1/3.
Check Stock