Top Precision Grooving Bars

Compact Wood Router, Trim Routers Hand Edge with 1/4 Inch Collets, 110V 800W 30000R/MIN Handheld Routers for Woodworking, Hand Wood Carving Trimming

  • 【Durable】LOONPON wood router is made with high quality Aluminum + Plastic which is durable to use and have long service life..
  • 【Easy Operation】The transparent base allows you to clearly see the trimming and easy operation. The transparent base design has high precision and is easy to identify during processing. Adjustable knob, scale can be adjusted..
  • 【Power Design】Power is 800 watts, the voltage is 110V, the chuck diameter is 6.35mm, and the power is 30,000 rpm. The 1/4" motor can provide enough power for wiring and fine-tuning applications. Effective heat dissipation and protection of the machine. Anti-vibration, practical, simple operation, durable..
  • 【Stable】The trimming guide rail and the rollers run along the curve to ensure accurate cutting and fine curve processing. Linear guide rail, thicker model is stable, no deformation, linear processing stable wooden wrench can tighten router head..
  • 【Widely Used】Widely used in wood processing, cabinet processing, handicraft production, plastic sheeting, wood veneer and other similar materials chamfering, grooving, surface finishing, curve cutting, planning wood edge, pattern processing operations activities and DIY. Easy to wood trimming, grooving..
Check Stock

Dremel 114 Rotary Tool Accessory Carving Bit- Perfect for Wood, Plastic, and Soft Metals , Gray

  • Our versatile and simple-to-use carving bits make it easy to express your creativity.
  • Carving bits work well for detailed material removal in applications like shaping, carving, engraving hollowing, precision cutting, grooving, slotting, inlaying, making tapered holes or freehand routing.
  • APPLICATIONS: Carving / Engraving / Etching (Teal color code).
  • WORKING DIAMETER: 5/16" (7.9mm), SHANK: 1/8.
Check Stock

iCarbide 1/2 Shank Indexable Boring Bar 6pcs Set 1/2\ - 3\ and 6pcs Carbide Inserts

  • Model：1PCS MGIVR2016-2 + 1PCS MGIVL2016-2 + 2PCS MGMN200-G NC3020.
  • Grooving holder : Each tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade..
  • Insert : Turning inserts exquisite workmanship, high strength, high toughness, stable and durable..
Check Stock

Tires Grooving Machine, TBVECHI Manual Tire Regroover Truck Tire Car Tire Rubber Tyres Blade Iron Grooving

  • In the tire surface carved out 2-20mm wide and 7-20mm deep tread, together with blade heating systems..
  • Carving patterns: U-, V-straight line type, and etc..
  • Tires Grooving Machine Model: Tire Groover.
  • What in Package: 1 x Manual Car Tires Grooving Machine.
Check Stock

FomaSP SPB2-26 26mm High Tool Holder for Grooving Adjustable Blades for GTN-2(SP200) Inserts, 1 PCS

  • Application External Grooving Parting off, fit for all CNC lathes and manual lathes, good at grooves, parting off..
  • Easy removal of grooving inserts with user..
  • Boring bar with high speed steel shank, strong shock resistance, thermal cracking and resistance to deformation.
Check Stock

Dremel 124 Rotary Tool Accessory Carving Bit- Perfect for Wood, Plastic, and Soft Metals , Gray

  • Dremel's versatile and simple-to-use carving bits make it easy to express your creativity..
  • The flame shape of the carving bit makes concave side cuts, V-bottom slots and grooves..
  • Carving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, precision cutting, grooving, slotting, inlaying, making tapered holes or freehand routing..
  • Use on soft metals, plastics, and woods especially on curved surfaces.
  • For use with rotary tools that can accommodate a 1/8" shank size.
Check Stock

Dremel 134 Rotary Tool Accessory Carving Bit- Perfect for Wood, Plastic, Linoleum, and Soft Metals

  • Dremel's versatile and simple-to-use carving bits make it easy to express your creativity..
  • The oval shape of the carving bit can be used to round edges and to make concave cuts..
  • Carving bits work well for detailed material removal in applications like shaping, carving, engraving, hollowing, precision cutting, grooving, slotting, inlaying, making tapered holes or freehand routing..
  • Use on soft metals, plastics, and woods especially on curved surfaces.
  • For use with rotary tools that can accommodate a 1/8" shank size.
Check Stock

Groovemaster Carbide Tungsten Steel Replacement Cutter Head for Golf Club Groove Sharpeners Made by Specialty Golf Products

  • GROOVEMASTER TUNGSTEN CARBIDE STEEL CUTTER HEAD is the replacement cutter head for ANY 6 Head Groove Sharpener made by Specialty Golf Products..
  • REPLACE EXISTING CUTTER HEAD EASILY using existing screw using standard and commonly found 2.5mm hex wrench as in image shown (wrench not provided). Takes less than 2 minutes to upgrade..
  • CLEANS, DEEPENS AND RESTORES WORN GROOVES with the best accuracy of any golf club groove tool on the market. Premium cutter head, made of tungsten carbide steel, cuts through standard steel, titanium and even maraging steel with unmatched ease..
  • MEASURING A HARDNESS OF 65 ON THE ROCKWELL SCALE, this premium cutter head is made from high grade precision tool vacuum heat-treated carbide tungsten steel. The Groovemaster Carbide Cutter Head is the ultimate solution for maximum durability and re-grooving effectiveness..
  • PRECISION GROUND AND ENGINEERED TO EXACTING TOLERANCES to ensure that it does not compromise USGA rules regarding groove width and depth..
Check Stock

BTSHUB Router Bit Set 1/4 inch Shank 100pcs Tungsten Carbide Tips for DIY Woodworking Cutter Kit

  • 100 piece tungsten carbide router bit kit with 1/4inches shank - 2-blade bits on most bits.
  • Bits for use on metal, wood, plastic and masonry - Controlled depth of cut minimizes kickback, Perfect for edging, trimming, veining and grooving in....
  • Precision ground cutting edges stay sharper - Heat treated shanks and bodies for durability.
  • Comes with the standard bits used in most household projects.
  • Aluminum carry case is included for convenient transport and keeping the bits in places..
Check Stock

Dremel 199 Rotary Tool Accessory Carving Bit- Perfect for Wood, Plastic, and Soft Metals , Silver

  • Our versatile and simple-to-use Carving bits make it easy to express your creativity..
  • Carving Bits work well for detailed material removal in applications like shaping, carving, engraving hollowing, precision cutting, grooving, slotting, inlaying, making tapered holes or freehand routing..
  • APPLICATIONS: Carving / Engraving / Etching (Teal color code).
  • WORKING DIAMETER: 3/8" (9.5mm), SHANK: 1/8", (3.2 mm), MATERIAL: High Speed Steel.
  • The Disc shape of the Carving bit can be used to make channel cuts while the accessory tip allows for side cuts..
Check Stock

HOTSTORE Palm Router Laminate Trimmer Wood Router Joiner Tool Device 30000RPM 1/4 800W

  • ✔【RELIABLE】- It features a robust speed palm router construction, advanced electronics, rugged base and proven ergonomics are reliable..
  • ✔【POWER DESIGN】- The Input Power 800W, 30000RPM 1/4'', motor delivers abundant power for routing and trimming applications..
  • ✔【MULTIFUNCTION】- Transparent base, processing accuracy easily to be recognizable. External carbon brush, universal carbon brush easy to....
  • ✔【PRECISION】- Dressing guide, roller running along the curve, ensuring cutting is exact.
  • Straight guide, thicker models are stable and not....
  • ✔【WIDELY APPLICATION】- Can be used for wooden processing, cabinet processing, handicraft production and DIY. Easy to wood trimming, grooving and....
Check Stock

VAN ALSTINE G-1000, TIRE GROOVER, GROOVING IRON, W/BLADES, SOUTHWEST SPEED INC

  • Brand New Deluxe Van Alstine Tire Grooving Kit (Part # G-1000) | * The G-1000 comes with a starter assortment of blades | * It operates on 110 volts.
  • Unlike other groovers, this deluxe groover is instantly hot You don't have to wait for it to heat up to begin grooving When you plug the G-1000 in, it instantly heats to the setting on the dial, which has adjustable heat settings 1 through 4 This kit is great for numerous applications including race car tires, truck tires, motorcycle tires, karting tires, ATV tires, industrial tires, etc.
  • Essentially, this groover is your easiest and most accurate choice for any tire grooving application | * Designed to be fast, smooth, & easy Glides over the tire surface Gives a precise, consistent cutting depth.
  • virtually automatic | * Cuts with less heat than most groovers, which prevents heat degradation to race tire surface | * Unparalled control | * Instant blade change & adjustment.
  • The Van Alstine G-1000 is designed to meet the exacting demands of modern tire grooving | * Its ease of use makes it possible for anyone to cut quickly & accurately | * The patented design of the G-1000 offers many advantages: The instant blade change & adjustment feature is critical for proper grooving | * This enables the operator to e....
Check Stock