Top Precision Hole Saw

Tungsten Carbide Alloy Hole Saw Cutter Kits for Metal, TcnoMreol 9pcs Hole Saw Bits Sets Hole Cutter Tool for Stainless Steel, Steel Plate, Copper, Aluminum Alloy Cast Iron 12~42 MM(24/51~1-13/20 in)

  • Material: Made of high quality TCT carbide alloy, strong and durable, high hardness, anti-rust. Also built tungsten steel center drill, precise positioning and very durable.
  • Lengthening-stem designed: These metal hole saw kits come with Lengthening-stem, total length can up to about 90mm(3-27/50”), make sure there is much longer working distance, it possible to punch holes in narrow corner..
  • High efficiency: Designed with center drill bits, precise positioning, hole saw made of precision ground, with sharp tough gears, wear-resistant, and chip removal easily and smoother cutting edges..
  • 9 of kits: Diameter, 12mm(24/51”), 15mm(11/20”), 18mm(7/10””), 20mm(19/24”), 22mm(6/7”), 25mm(49/50”), 30mm(1-9/50”), 35mm(1-19/50”), 42mm(1-13/20”) hole saw kits, and 9pcs spring and Allen wrench. You can choose the most suitable size to make a hole..
  • Widely using: These TCT hole saw sets can use on stainless steel plate(less than 3MM(3/25”), Copper, Aluminum Alloy Cast Iron(less than 10mm(13/33”)), etc. And these hole cutter kits can working with bench drill, magnetic drill, electric hand drill, etc..
Check Stock

Hole Saw Set 7Pcs Diamond Drill Bits with Hole Saw Guide Jig Fixture 1-3.15 inch Coated Core Drill Bits Adjustable Hole Saw Centering Locator Suction Holder for Glass,Ceramics,Tile

  • 7 Sizes Diamond hole saw : 26mm,30mm,40mm, 50mm,60mm,70mm,80mm,made of high strength carbon steel makes these diamond drill bits durable..
  • The diamond hole saws coated with high quality diamond,enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken....
  • Adjustable hole saw drill guide jig fixture with suction base.Plates' maximum opening length is 3-1/4", large enough to put in all sizes' hole saws..
  • Removable ball bearings, 2 Modes (3 or 4 bearings fixing ) are optional for you, just flip the plate.Guide hole saw or drill bit to drill clear holes....
  • Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone.
Check Stock

TCT Hole Saw Kit, LAIWEI Carbide Stainless Steel Hole Saw, Electric Metal Drill Saw, Tungsten Alloy Hole Cutter, Carbide Tipped Hole Saw Drill Bit Tungsten Carbide Tipped Hole Saw Drill Bit (14pcs)

  • ⭐ Hole Saw ----- LAIWEI TCT Hole Saw Kit (Carbide Hole Saw) Includes 10 Hole Saws: 16mm Hole Saw, 18mm Hole Saw, 20mm Hole Saw, 25mm Hole Saw, 30mm Hole Saw , 35mm hole saw, 45mm hole saw, 50mm hole saw, 55mm hole saw, 60mm hole saw and 2 drill bits and wrenches..
  • ⭐ Carbide Stainless Steel Hole Saw ----- Sharp tungsten alloy blade can easily cut steel, iron, aluminum, copper and cast iron. The depth of cut reaches 25 mm..
  • ⭐ Drilling --- Spring pilot drill removes chips and saves time. The hole knife cuts cleanly without burrs..
  • ⭐Precautions for electric drill air saw: Use perpendicular to the parts, use cutting oil when cutting metal materials, and start cutting at low speed. Stainless Steel Hole Saw -: Under normal conditions, this tool will last longer than other hole punching tools..
  • ⭐Stainless Steel Hole Saw--: Under normal conditions, this tool will last longer than other hole punching tools..
Check Stock

Locisne Hole Saw Set 11 Pieces 3/4" - 2-1/2 " Hole Saw Kit with Hex Key and Mandrels for Wood, PVC Board, Plastic Plate Drilling

  • ...zes meet your different needs, cutting depth 25 mm. Includes Hex Key and 2 center drill, make the corresponding operation is convenient..
  • Outstanding performance: The special gear design makes the hole more accurate, and high speed steel teeth for fast and clean cuts. High precision, smooth cutting edges, especially impact resistance, wear resistance! Suitable for normal wood, thin PVC board, plastic..
  • Well organized: It has been well organized in a convenient plastic storage case helping you easy carry out for work. After use, easy to store together for the next time you use..
  • Package includes: 8x Carbon Steel Hole Saw, 2x Mandrels, 1x Hex Key, 1x Package Box. Locisne Hole Saw Set is guaranteed to be 100% brand new quality, if have any problems with our products or service, kindly please feel free to contact us..
Check Stock

SUNGATOR 6-Piece Bi-Metal Hole Saw Kit, General Purpose 3

  • DURABLE: Construction of high quality Bi-Metal for rust proof, 2mm thick, much more durable and can offer a up to 50% longer life.
  • GREAT HOLE CUTTING: Sharp teeth perfect for hole cutting on metal, wood, PVC board, plastic and drywall.
  • PROFESSIONAL AND SAFE: The hole saw arbor is designed with 2 locking pins which can firmly fix the hole saw, improving stability, safety and preventing over tightening.
  • EASY TO USE: Tool-free, fast and easy to operate. The pilot drill can be replaced by removing the set screws with the hex key.
  • 4 slots design for easy plug removal after using.
  • compatible with most drills of other manufacturers.
  • COMPLETE SET: Includes 3 hole saws: 3", 4", 4-1/4" for needs in different situations.
Check Stock

COMOWARE Hole Saw Kit for Wood- 16 Pieces 3/4’’-5’’ Full Set in Case with 1pcs Hex Key, 2pcs Mandrels and 1pcs Install Plate for PVC Board Plastic Plate Drilling Drywall and Soft Wood

  • ...treated with Black Oxidation. Black oxide provides mild corrosion protection to the treated parts, it is primarily used because of its aesthetic properties..
  • SUPERIOR PERFORMANCE: The special gear design makes the hole more accurate and symmetrical, and carbon steel teeth provides fast and clean cutting. Produced by precision fully ground which ensures chips move smoothly. High precision, smooth cutting edges, especially impact resistance, wear resistance are our advantages..
  • WIDELY AND PROFESSIONEL USE: It is your ideal choice for DIY projects and household maintenance and repair. Suitable for normal wood, thin PVC board, plastic..
  • SIZE INCLUDES: 3/4''-5 (3/4 " (19mm), 7/8" (22mm), 1-1/8" (28mm), 1-1/4" (32mm), 1-1/2" (38mm), 1-3/4" (44mm), 2" (51mm), 2-1/2" (64mm), 3" (76mm), 3-1/2" (89mm), 4" (102mm), 5" (127mm). The set includes the most popular hole saw sizes on the market to meet your different demands.The deepest cutting depth is 25 mm. The set also covers a Hex Key and 2 center drill to make the corresponding operation become convenient..
  • EASY ORGANIZATION: Set includes the hole saw kit holder with size index for easy storage and organizing. It is designed to keep all components organized and convenient to take..
Check Stock

Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10

  • Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. ​Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle..
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees..
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting..
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free..
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for....
Check Stock

WORKPRO Hole Saw Kit, 11 Piece, Bi-Metal Hole Drills, 3/4\ to 2-1/2\ High Speed Steel M42 Drill Hole Cutter with Mandrels in Hard Case for Cutting Stainless Steel, Brass, Aluminum, Steel and Wood

  • ...alt HSS teeth that offer fantastic performance and long-lasting durability. Each hole saw is crafted with hardened backing plates to prevent warping and threading. Two pilot drills are made of premium high-speed steel for precise positioning and rapid drilling, providing a much longer life..
  • Optimized tooth design - Precision-ground tooth design makes the cutting surface more smooth and even. These saws also feature bi-metal material that cuts both wood and metal with speed and ease. Especially suitable for sheet metal cutting: the cutting depth is 0.08 ~ 0.2 inch, depends on the hardness of the metal and choice of the drill (Bench/Pistol)..
  • Fast loading mechanism - The hole saw adapts a new type of quick loading mechanism that allows fast loading without any installation of washers or nuts. The thread design keeps the hole saw more stable when cutting, which makes the cutting hole more standard..
  • Convenience - The saw features a small quick change mandrel, a large quick change mandrel, all wrapped up in a convenient carrying case, which allows you to keep all of your parts organized. Saws are marked with both Imperial and Metric measurements..
  • What you get - The set comes in a strong storage case. It contains many popular hole sizes, including 3/4”, 7....
Check Stock

VIKITON Hole Saw Kit for Metal and Wood Plastic Project, Bi-Metal Hole Saw Set with Case from 7/8'' to 2-1/2'', Hole Cutter with Flat and Smooth Cutting Drilling Edge, Fast Chip Removal

  • Long Service Life : Hole Saw Kit, Bi-metal construction , special flexible steel saw body and high speed steel cutting teeth , for long service life , rust proof , great corrosion and heat resistance..
  • Superior Versatile Performance : High speed steel sharp cutting teeth effectively drills through metal , wood , PVC board , plastic and drywall , clean and smooth , high precision ..
  • Kit Includes: 7/8’’ , 1-1/8’’ , 1-3/8’’ , 1-3/4’’ , 2’’ , 2-1/2’’ hole saws , 1 pilot drill bits for replacement, 1 big arbor (1 drill bit), 1 small arbor (1 drill bit), 1 hex key..
  • High Efficiency : The deep gullets on the sides of hole saw provides fast chip removal , and the geometry funtional slot on the bottom of hole saw provides easy plug removal ..
  • Storage Conveniently : Kit box included for easy storage and carry , free of worry about losing small parts in the kit after handling, handy kit..
  • Suitable for: This kit is high performance cost ratio tool set, easy to operate, very suitable for DIYers to do some normal project around house and yard..
Check Stock

MORETOPGOOD Hole Saw Set, 25PCS Bi-Metal Hole Saw Kit with 1-3/4\ to 1-1/2\ Saw Blades with 10 Hole Saws, for Engineered Wood, PVC Board, Plastic, Plywood for Home Hole Saw Set, Drill Bits

  • Complete Hole Saw Set: Includes 10 hole saws: 3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/4″, 2-1/2″ for different needs, 10 x spare pilot drills for replacement, 1 x large mandrel, 1 x small mandrel with medium adapter and 1 x plastic case for easy storage, 1 x hex key.
  • Professional Quality - Hole saw kit is made of high-speed steel (HSS) Bi-Metal for rust-proof and wear-resistant, 2mm thickness, much more durable for longer life.
  • Precision drilling-Optimized sharp uniform tooth profile design, center positioning, and precise drilling. The hole knife can easily penetrate metal and wood, prevent slippage, and is easy to remove chips, providing you with clean, fast and high-precision cutting.
  • Suitable for a Variety of Materials-very suitable for drilling holes in metal, wood, PVC board, plastic board, drywall, and gypsum board. Widely applicable to most drilling rigs.
  • MORETOPGOOD's Guarantee - We're aimed to provide you superb quality tools, If you have any issues with our hole saws set, feel free to contact us for troubleshooting help, parts, replacement, or refund.
Check Stock

4 Inch Hole Saw with Heavy Duty Arbor, 38mm Depth High Hole HSS Bi-Metal Cutter Saw 4 Inch Hole Saw Blade for Easily Drilling Soft Metal, Plywood, Plastic, Drywall, Wood, Fiberboard by AConnet (102mm)

  • 【High Performance Material】The 4 inch hole saw is made of M42 high speed steel and bi-metal, with higher hardness (≥64HRC), toughness and wear resistance, increased service life..
  • 【Hole Saw Dimensions】Cutting diameter: 4 inch (102mm).
  • Hole saw arbor shank: 7/16 inch (12mm), fits 1/2" drills..
  • 【Efficient Smooth Cutting】The hole saw blade is combine with sharp teeth, bi-metal band and non-binding clean edge.
  • Sharp duplex tooth for nice edge and sharp.
  • Therefor the hole saw blade cuts smoothly, cleanly and quickly..
  • 【Package Include】 Package include 1 pcs 102mm hole saw, 1 pcs 7/16" hole saw arbor, 3 pcs high-speed steel pilot drills and 1 pcs Allen wrench. Contact us if there any problem with the product. We attach great importance to customer's shopping satisfaction and are willing to solve any problems you have..
Check Stock

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

  • 【Bi-Metal 6-3/8-Inch Hole Saw】The 6 3/8in hole saw made of HSS carbon steel & Bi-metal steel, heavy-duty steel construction and carbide grit edge, ensuring perfect drilling performance and providing the fastest, most consistent and longest lasting cutting.
  • 【Recessed Lighting Hole Saw】The 6 3/8inch recessed lighting hole saw can drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
  • 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
  • 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
  • Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
  • 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
  • Widely used in plate holes, household wood, galvanized pipe, gy....
Check Stock