Top Precision Indexable Boring Bar
Accusize Industrial Tools Sclcr 4 Pc Indexable Boring Bar Set with 14 Carbide Cvd Coating Ccmt32.51 Inserts 1/2 5/8 3/4 1 P252-S416
- SCLCR 4 Pc Indexable Boring Bar Set with 14 CCMT32.51 Inserts, 1/2, 5/8, 3/4, & 1".
- Extreme Gloss Finish. Negative 5Degree End side cutting angle.
- Utilizes 80Degree Diamond CCMT inserts. Bar hardness approx. 45HRC.
- The insert is securely held with a torx screw to reduce tool slipping.
- 1 each of 1/2'', 5/8", 3/4'' and 1" and CCMT 32.51 Carbide Black/Yellow Inserts.
Check StockYG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range
- ...igh hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
- ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
- ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the bar increases the anti-vibration capability of the boring bar..
Check StockAccusize Industrial Tools 3/4 x 10 Rh Sclcr Indexable Boring Bar with 10 Pcs Ccmt Carbide Cvd Coating Insert P252-S407Ins
- 1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar.
- With broad capability for steel, stainless steel, grey and nodular cast-iron.
- Operations: turning, facing and profiling.
Check StockAccusize Industrial Tools 3/4\ 4pc Indexable Stubby Length Boring Bar Set, w/Carbide TiN Coated TCMT Inserts and Extra Screws, EJ99-2180
- 4 PC 1/2'' Shank Indexable Boring Bar Set.
- C6 grade: carbide for steel and alloy steel.
- Case overall dimension:5-1/2"Lx5"Wx1-1/4"H.
Check StockAccusize Industrial Tools 3/4\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0034
Check StockAccusize Industrial Tools 8 Pc 3/4 Round Shank Indexable Boring Bar Set with Tcmt Carbide Inserts 90 Degree 2627-9108
- 3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
- Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
- It is not necessary to remove tool from chuck or tool post.
- Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
- 1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.
Check StockASZLBYM S06K/S07K/S08K/S10K/S12M-SCLCR06 Lathe Indexable Internal Boring Bar Set Lathe Turning Tools Holder Set with CCMT21.51/CCMT060204 Carbide Indexable Boring Turning Inserts + 5pcs T8 Wrench
- ♥PACKAGE INCLUDES : 5pcs lathe turning tools (S12M-SCLCR06 + S10K-SCLCR06 + S08K-SCLCR06 + S07K-SCLCR06 + S06K-SCLCR06 )+ 5PCS CCMT21.51( = ISO CCMT060204 ) carbide inserts + 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box..
- ♥5PCS BORING BAR : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
- ♥Lead cutting angle: 95 Degree, cutting direction: right hand, turning insert: CCMT21.51( = ISO CCMT060204 ), clear mark on the wrench, easy to identify bar holder..
- ♥ 5PCS CCMT21.51 INDEXABLE INSERTS : inserts are made of carbide and the coating material is Multilayer ,the Inserts can be used for finishing or semi-finishing stainless steel and cast iron..
- ♥ADVANTAGE : the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .If you need more CCMT21.51/CCMT060204,you can search for ASIN: B09495PCR6.
Check StockASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G
- ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
- ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
- ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
- ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
Check StockSpec Ops Tools 11\ Molding Pry Bar Nail Puller Cats Paw, High-Carbon Steel, 3% Donated to Veterans,
- SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 21 inches to 33 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
- QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
- COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubles....
Check StockARES 46000-13.3-Inch to 18.5-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel
- SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 13.3 inches to 18.5 inches with a 14-position locking head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
- QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
- COMMON APPLICATIONS: Indexable Pry Bars are the perfect tools for removing engine and axle drive seals as well as a number of other applications. These 14-position pry bars give you superior leverage in confined or hard to reach areas, and extendable handle combined and ergonomic grip will give you the edge you need to get the job done..
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubleshooting help, parts, replacement, or refund..
Check StockARES 46003-21-Inch to 33-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel
- SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 21 inches to 33 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
- QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
- COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubles....
Check StockARES 46004-29-Inch to 48-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel
- SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 29 inches to 48 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's ergonomic TPR grip will help prevent hand fatigue and ensure a firm grip for the smoothest possible use..
- QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
- COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed ....
Check Stock