Top Precision Shaft Parts

OMPHOBBY M2 Dual-brushless Motor Direct-Drive 3D Helicopter-RTF(Charm Orange)

  • ...ive, which perfectly controls the running accuracy and the direct smooth driving feel. It reduces the resistance and noise of gear transmission, especially in flight routes and soft 3D flight, and basically can only hear the sound of propeller cutting wind..
  • The brushless motor is manufactured by SUNNYSKY with high precision, the motor shaft and the shaft of the rotor head are integrated. Besides, the spindle can be disassembled by removing the three screws, and the installation does not affect the dynamic balance. The hand wound coils and the high-performance magnets provide continuous power to M2. After consecutive violent flight with ten batteries, the motor temperature does not exceed 50 degrees, and it can safely fly violently..
  • Independent R&D integrated OFS flight control system. Gyro, flight control, ESC, and receiver 4 in 1 controller, combined with low-vibration airframe, which makes M2 with precise lock tail and excellent control feeling. The flight control has three built-in flight modes: attitude stabilization / soft 3D / violent 3D, which is suitable for indoor flexible flight and outdoor violent flight. In addition to its own communication protocol, it is also compatible with the receiver interfaces of S.BUS a.
Check Stock

Dorman 425-186 Lower Intermediate Steering Shaft

  • 5-year warranty, new-engineered for slide limit，The limit rivets which are easy to deform are eliminated, and with heavy Universal Joint.
  • U-joints use precision engineered needle bearings for smooth operation、durable wear and strength.
  • Aftermarket part that Compatible With OEM Part Numbers: 19329330.
  • If you are not sure about compatibility,....
  • C CLINK parts are manufactured to match the original design and performance..
  • This Steering Shaft compatible with many vehcile,please check compatible list below first, if your vehicle not in compatible list,please do contact us....
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • ... set with 4.8 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
  • Blow Mold Case: This bushing removal tool is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

GMB 125-6030 OE Replacement Water Pump with Gasket

  • 100% factory tested for leakage and dimensional precision.
  • Designed to match OE coolant flow rate and pressure.
  • Precision-ground shaft and hub accept OE fan clutches perfectly.
  • All required hardware included for easy installation.
  • Factory sealed, precision ground, one piece bearing assembly.
  • High-flow design for long-lasting, efficient cooling.
  • Unique no-sealant required, gasket makes installation fast, easy and leak-free.
Check Stock

GMB 125-6040 OE Replacement Water Pump with Gasket

  • 100% factory tested for leakage and dimensional precision.
  • Designed to match OE coolant flow rate and pressure.
  • Precision-ground shaft and hub accept OE fan clutches perfectly.
  • All required hardware included for easy installation.
  • Factory sealed, precision ground, one piece bearing assembly.
  • High-flow design for long-lasting, efficient cooling.
  • Unique no-sealant required, gasket makes installation fast, easy and leak-free.
Check Stock

Rescue Equipment Three-Piece Set RC Steel Rope / Pulley / Lock Sleeve for RC Model Car Climbing Vehicle

  • 2A means center shaft is 1.95mm and close-fitting with 2mm shaft. 2B means center shaft is 2.05mm and loose-fitting with 2mm shaft.
  • The products are for toys pulleys spare parts, suitable for DIY model technology production.
  • Made of high quality plastic, wearable and long service life.
  • This is the pulley set including 7 kinds of gear parts. It can meet your DIY needs.
  • Small parts, easy to use, great model making accessories for all kinds of cars, robots, etc.
Check Stock

Estwing 6.75-Inch Long Precision Pick Tool with 40-Degree Angled Tip for Removing Hoses, Clips, Washers, and More, Chrome Vanadium Steel, Comfortable Grip

  • 40-degree tip - 40-degree angled tip is ideal for prying free clips, breaking hose connections, removing washers, and more.
  • Precision tool - mini sized hook measures 6.75-inches long and is ideal for delicate, precision tasks.
  • Hardened steel - hardened chrome vanadium steel tool shaft with rust-resistant polished chrome finish.
  • Knurled shaft - 3-inch long pick shaft has a knurled section for maximum control during precision tasks.
  • Comfort grip - dual molded pp / tpr ergonomic handle helps prevent hand fatigue.
Check Stock

ECCPP Complete Rear Drive Shaft Prop Shaft Assembly Fit for Porsche Cayenne 2003-2010 for VW Touareg 2004-2008

  • COMPATIBLE VEHICLES - Compatible for Porsche Cayenne 2003 2004 2005 2006 2008 2009 2010, Compatible for Volkswagen Touareg 2004 2005 2006 2007 2008 2009 2010. Please enter your Year / Make / Model information in the query tool at the top left to confirm your fitment.
  • COMPREHENSIVE TEST - The drive shaft is a rotating body with high speed and few supports. So we have balanced and tested the drive shaft. In addition, we will carry out strict tests on the specification of the drive shaft and the power transfer efficiency of the universal joint, to ensure that the drive shaft meets optimum performance and specifications.
  • WHY REPLACe - When your drive shaft fails, the car would start with a clucking sound, and the chassis would always produce abnormal noise and the car body would produce obvious vibration during driving. This is usually due to wear and tear of the drive shaft and its parts, deformation and loss of dynamic balance. It will make your car less powerful and use more energy, and make your driving experience worse. So it is necessary to inspect and replace timely.
  • DIRECT REPLACEMENT - OE standard specification, lubricated has been carried out. You will get 1 drive shaft with center support bearing and 1 bearing support fR-ame with 2 bolts. Pl....
Check Stock

STREBITO Precision Screwdriver Set 191-Piece Multi-Bit Screwdriver 1/4 Inch Nut Driver Home Improvement Tool Electronic Repair Kit for Computer, iPhone, Laptop, PC, Cell Phone, PS4, Xbox, Nintendo

  • Professional precision multibit screwdriver set includes 56* screwdriver bits, 1* screw driver, 1* extension rod, 1* flexible shaft for extension and 1* insert bit holder for connection with electric drill (Not Included).
  • In precision torx bit set, 56 bits are made of S2 Alloyed Steel, with high wear resistance and lightweight.
  • functional case allows you to pick up the exact bit by single touch of the button and you can prevent loss of small bits.
  • Precision screwdriver set magnetic is equipped with extension rod, insert bit holder, and a flexible soft shaft, allowing you to reach screws that are completely inaccessible, great for stereo work.
  • the flexible shaft is also helpful to solve puzzle about some blind angle screws.
  • Precision screwdriver 56 bits set is useful for multiple occasions for most digital products and electric devices, small precision items which needs daily maintenance and adjustment for long period of use, such as watches, eyeglasses, smartphones and camera, tables, iPad, MacBook, Laptop.
Check Stock

TECHTONGDA 3T/H Sanitary Self-priming Pump Self-suction Food Grade Centrifugal Pump Stainless Steel Transfer Machine for Beverage Liquid

  • Self-priming pump, with compact structure, beautiful appearance, light weight, convenient operation..
  • Adopting smooth transition, rigid structure and thick-wall design, the parts of the pump body, pump cover, impeller, etc that are in contact with the material are all made of stainless steel..
  • The pump body and impeller adopt integrally precision casted , and all parts are surface treated..
  • Mechanical shaft seals are made from high quality stainless steel and silicon carbide,improving wear resistance and lubricity and extend service life..
  • This sanitary pump is suitable for conveying various liquids such as milk, beverages and wine. It is an indispensable conveying equipment for food, chemical and other industries. It is especially suitable for systems with large resistance such as tube sterilization, yogurt temperature control equipment and CIP cleaning..
Check Stock

ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

  • [Car Maintenance Made Easy]: When removing harmonic balancers, gear pulleys, steering wheels, and crank shaft pulleys, depend on the ABN 13 Piece....
  • [Even Application]: No need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts.
  • [Built to Last]: Steering wheel puller kit bits are hardened and tempered to ensure longevity and strength.
  • Machine precision flywheel puller tool....
  • [Fit for Your Tool Kit]: Wheel puller set includes (1) floating swivel, (2) 5/16 by 4 inch (7.9mm x 101mm) bolts, (2) 1/4 by 3 inch (6.3mm x 76mm)....
  • [Blow-Molded Case]: Steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure....
Check Stock

RC Drift Car 1/24 2.4GHz 4WD Remote Control Sport Racing On-Road Vehicle with LED Light, Batteries and Drift Tires (Blue 460)

  • ZD Racing launched a 1/16 full-proportional controller four-wheel drive track flat sports car.
  • The full-scale re-engraved car shell is equipped with LED ambient lights.
  • A large number of metal structural parts are used, and the hollow and high-gloss design can effectively reduce the weight of the body, enhance the strength of the body, and have a full metal texture.
  • Aluminum alloy CNC precision machining bottom plate, hollow design.
  • effectively reduce the weight of the body and enhance the strength of the body.
  • The whole car adopts refined steel drive shaft, precision high-speed bearings, and high-strength gear power transmission system, which is not afraid of speed. Easily achieve indoor/track drift racing, bringing a super visual feast.
Check Stock