Top Precision Shim Set

1095 Spring Steel Sheet, Blue Temper, AMS 5122/SAE 1095/AISI 1095/AISI 1095, 0.010\ Thick, 6\ Width, 25\ Length, Pack Of 2

  • Made from a high carbon 1095 hardened and tempered spring steel.
  • Precision Brand's blue tempered shim is "Branded" with everything the user needs to know clearly marked right on the material: material type, material thickness, and lot # for full traceability.
  • Material is preferred by tool and die makers for templates and shim applications where toughness and high fatique strength are required.
  • Measures 6" wide by 25" long by 0.010" thick.
Check Stock

Handi-Shim, White HS1840WH Plastic Construction Shims/Spacers, 40 Pack, 1/8-Inch, 40, 40 Count

  • Cost 20 Percent less than the average shim and are available in four color-coded thicknesses and 15 combinations of sizes and quantities.
  • Handi-Shims form a secure, flat base with only one shim (not needing to overlap two wedge-shaped shims).
  • Made of plastic, Handi-Shims resist compression, will not rot, and can be reused in many applications.
  • Handi-Shims can serve as high-precision spacers and scribes.
  • Handi-Shims can be easily and neatly cut into smaller units for small-scale jobs and can be easily secured using a pre-drilled screw hole.
Check Stock

Valve Spring Shim Kit - 1.300\ OD.520\ ID .030\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1. 300" Outside Diameter, 0. 520" Inside Diameter. Includes 16 0. 030" Thick Shims..
  • Recommended for use with ~ 1. 300" Outside Diameter or smaller like our 26915 Beehive and 7228 Conical Spring..
Check Stock

Hot Cams DB Electrical HCSHIM02 Complete Shim Kit Compatible with/Replacement for Arctic Cat ATV DVX 400 /Honda CRF 450R CRF450X TRX 450ER TRX 450R /Kawasaki KFX 400 KFX 450R KLX 450R KX 450F/Suzuki

  • Fits: Shims in each size 2004 - 2008 Arctic Cat DVX 400 Shim Kits ATV 2006 - 2014 Honda TRX 450ER Shim Kits ATV 2004 - 2009 Honda TRX 450R Shim Kits ATV 2003 - 2006 Kawasaki KFX 400 Shim Kits ATV 2008 - 2014 Kawasaki KFX 450R Shim Kits ATV 2006 - 2009 Suzuki LT-R 450 Shim Kits ATV 2003 - 2013 Suzuki LTZ 400 Shim Kits ATV 2004 - 2013 Yamaha YFZ 450 Shim Kits ATV 2009 - 2014 Yamaha YFZ 450R Shim Kits ATV 2010 - 2011 Yamaha YFZ 450X Shim Kits ATV 68-2072, 0925-0011, 560894, HCSHIM02, 18997-00, 870967.
  • Replaces:Western Powersports 68-2072, Lemans 0925-0011, Tucker Rocky 560894, Marshall, Southern HCSHIM02, Advantage Performance 18997-00, Automatic Distributor's 870967 ".
  • 100% New aftermarket unit built to meet OEM specifications.
  • 1-year warranty protects you after your purchase.
  • Factory direct pricing with no middleman markup delivers exceptional value.
Check Stock

BEAMNOVA 3PCS 5/8\ CNC Metal Indexable Lathe Tools Sets Holder MTJNR1616H16, MWLNR1616H08, MCLNR1616H12 Blades WNMG431, CNMG431, TNMG331

  • Material: Carbide + Tungsten steel. Number tool holder: 3Pcs (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12) Number of CNC blades: 3Pcs (WNMG431+CNMG431+TNMG331). Applicable machine tools: lathe. Each tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade..
  • Turning inserts exquisite workmanship, high strength, high toughness, stable and durable..
  • (1)MTJNR1616H16 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 93°. Shim: ST 1603. Pin: MCT513. Clamp: HL 1814. Clamp Screw: MCS625. Wrench: L2.0, L3.0. Matching Inserts Model Number: TNMG 331. Matching Inserts Length: 16 mm (5/8 in). Matching Inserts Thickness: 4 mm..
  • (2)MWLNR1616H08 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 95°. Shim: SW 0804. Pin: MCT617. Clamp: HL1814. Clamp Screw: MCS625. Wrench: L2.5, L3.0. Matching Inserts Model Number: WNMG 431. Matching Inserts Length: 8 mm. Matching Inserts Thickness: 4 mm..
  • (3) MCLNR1616H12 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 95°. Shim: SC 1204. Pin: MCT617. Clamp: HL1814. Clamp Screw: MCS62....
Check Stock

Allstar ALL60200 Upper Control Arm Shim, (Pack of 10)

  • Also available in . 125 thickness by ordering Allstar part 60201 (sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
  • Control arm shim is an upper type that is . 062 inch thick and designed for individual mounting.
Check Stock

Air Shim Bag - 3 Pack

  • Air Shim Bag – 3 PCS Pack. 3 sizes in Small, Medium, and Large, to meet a variety of work needs..
  • Air Shim Bag – A variety of purposes, including moving and adjusting the level..
  • Air Shim Bag – Allows a single installer to hold the unit in place, accurately adjust and level..
  • Air Shim Bag – Improve work efficiency and reduce unnecessary labor..
  • Air Shim Bag – ABS+TPU+420D nylon commercial grade quality, durability and performance..
Check Stock

3 Pcs Guitar Neck Shims Made of Solid Maple Protective Guitar Neck Gasket for Bolt-on Neck 0.25° 0.5° and 1°Degree Guitar Plate for Guitar and Bass Repair

  • 【 FUNCTION 】 Guitar neck shims are used to change the angle of a bolt-on guitar neck for protection purposes. The shims are carefully angled and molded from tapered maple to provide the exact angle of tilt needed without creating an air pocket, thus protecting the guitar's neck and base from wear and damage..
  • 【 PERFECTLY RESTORE YOUR GUITAR OR BASS 】 Our guitar neck shims are ideal for repairing electric guitars and basses. They are made with a highly versatile design and can be easily customized to fit your specific needs by cutting or sanding, to protect your guitar from corrosion and improper angle damage..
  • 【 MADE OF SOLID MAPLE 】 The choice of solid maple for guitar neck shims is preferred over plastic for its better resonance, stability, and ability to produce a more beautiful sound..
  • 【 HARD MAPLE SHIM SET WITH THREE TAPERS 】 A set of three hard maple shims with tapers of 0.25, 0.5, and 1 degree, each with a rectangular shape featuring rounded edges and measuring 55 mm by 75 mm. The approximate taper specifications are 0.76 mm to 0.48 mm for the 0.25-degree shim, 0.71 mm to 0.20 mm for the 0.5-degree shim, and 1.52 mm to 0.25 mm for the 1-degree shim..
  • 【 EASY TO USE 】 To ensure a quick turnaround for a common guitar repai....
Check Stock

Allstar Performance ALL60205-10 Upper Control Arm Shim, (Pack of 10)

  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
  • Control arm shim is an upper type that is . 250 inch thick and a dual mount design for use with 6 inch bolt spacing.
Check Stock

Allstar Performance ALL60204-10 Upper Control Arm Shim, (Pack of 10)

  • One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
  • Shims allow easy adjustment of caster/camber during front end alignment.
  • Control arm shim is an upper type that is . 185 inch thick and a dual mount design for use with 6 inch bolt spacing.
Check Stock

Howards Cams 96210-30-1: Valve Spring Shim; 1.250 .030

  • Valve Spring Shim Outside Diameter: 1.250.
Check Stock

Game Room Guys Rubber Pool Table Leg Shims Varied Sizes - Set of 12

  • LEVEL YOUR POOL TABLE - Mix and Match Shims to Level Your Pool Table.
  • VARIED THICKNESS - (3) 1/32 Rubber Shim, (3) 1/16 Rubber Shim, (3) 1/8 Rubber Shim, (3) 1/4 Rubber Shim.
  • GREAT FOR BARS AND GAME ROOMS - Perfect for Commerical and Home Use.
  • LONG-LASTING RUBBER - Rubber Lasts Longer than Wood Shims.
Check Stock