Top Precision Vise 6

Pin Vise for Resin Casting Molds, LEOBRO Steel Hand Drill, Resin Drill with 10 PCS Drill Bit, Precision Hand Drill Tools for Epoxy Resin Arts Crafts, Wood, Clay, DIY Resin Keychain Jewelry Making

  • Handy Hand Drill for Crafts: Help drill small holes in resin, wood, plastic, polymer clay, bead, pearl or other not too hard surface, assist to make resin jewelry, resin keychain, necklace, erring, bracelet, pendant, model, sculpture, doll etc., make small precision job much easier. Note: Not fit for hard materials, like iron, steel, stone..
  • Sturdy & Exquisite Pin Vise: The precision resin drill is made of premium stainless steel, rust proof, sturdy and durable. Silver surface, polished handle, has even rough texture in 3 turning parts, looks pretty exquisite and can be rotated easily, fit for various DIY craft projects..
  • Precision Drill Bits Set: 10 sizes of steel drill bits, 0.8/1.0/1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0 mm, satisfy your different demands. Pointed end, good for drilling, and the holes drilled will be nice and clean. All 10pcs are packed in a plastic box which has 10 compartments and according marks, prevent loss, and easy to distinguish..
  • Tight 3 Jaw Chuck: The hand pin vise features 3 jaw chuck, clamp the drills bits in 0.8-3 mm, keep them upright and clip them tightly, great for smooth drilling work, and it’s easy to install and replace drill bits by rotating the vise head..
  • Use-friendly Drill Tool: Swivel hand drill for manual drilling, ....
Check Stock

Hi-Spec 1 Piece Hobby & Craftwork Mini Table Suction Vise for DIY Repairs, Modelling, Painting, Gluing, Soldering & Crafting

  • ...from die-cast aluminium alloy, this portable mini vise, with its easy to use table fixing, can be used almost anywhere.
  • PROTECT DELICATE PARTS: The vise jaws, with the soft rubber jaw cover pads, open up to 60mm (2-3/8"), and maintain a firm hold on workpieces without risk of damaging or marking them. Ideal for precision metal soldering tasks or delicate crafting projects. Pads are removable to increase the jaws opening for an extra 10mm (3/8") of width.
  • 360° FLEXIBLE HEAD: Using a socket and ball joint, the head can be rotated a full 360° and pivoted 90° so your workpiece is almost totally exposed without having to reposition within the jaws. Simply tighten the locking screw to fix in the ball position.
  • T-BAR TIGHTENING: Jaws are opened and closed using a classic sliding T-bar screw mechanism, made from chrome plated A3 steel, which allows for delicate tightening where required as well as creating high levels of torque for maximum tightness.
Check Stock

Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

  • COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
  • TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
  • SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....
Check Stock

ZGRM Vise Precision Bench Clamp 4-Inch Drill Press Vise blue2

  • Data: The jaw of vise can be opened up to 4 inches..
  • Wide range of use: 4 inch cast iron drill vise can precision process various shapes of wood, metal, plastic and other precision parts. In order to....
  • Stability: Fix the workpiece firmly in place to achieve safe and accurate drilling. The heavy-duty cast iron base and four on-board mounting slots....
  • Broad compatibility: 4-inch drill presses are compatible with most drill press benches on the market..
  • Material: The clamp table is forged with a spray-forged hardening process to ensure ultimate durability and long service life..
Check Stock

JCL Vise Jaws - Nylon, Multipurpose 6' - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

  • Multipurpose Design: These 6" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place..
  • Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gun-smithing, jewelry making, and more..
  • 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

Mophorn 6 inch CNC Double Vise Milling Drilling Machine 11.10 inch Max Jaw Opening (6 inch)

  • Cast Iron Construction: Made of ductile cast iron, high tenacity to be durable. Smooth appearance with high accuracy, fine grinding vise bottom easy fixed. Mounted vertically or horizontally. Thicken supporting base. Locked angle for fixing workpieces during operation..
  • High Accuracy Design: Overall Dimensions(LxWxH): 612 x 160 x 130 (24.10" x 6.30" x 5.12"), Width of Jaw: 160mm (6.30"), Height of Jaw: 45mm (1.77"). The CNC mill vise has been experienced precision ground on all sides. its accuracy (parallelism and squareness) is 0.015mm/100mm..
  • Durable Swivel Handle: Nut and handle of ductile cast iron, anti-corrosive and elegant. Single swivel handle operates both clamping stations simultaneously. Easy to use..
  • Adjustable Clamping Positions: Two work pieces of same size or of different size can be clamped with it. Also able to clamp two same work pieces which are clamped in different positions pocessed in different surfaces. Dismount middle part for longer workpieces..
  • Professional Screw Rod: Black screw rod has been hardened, wear-resisting and anti-rust. Threads clamp fastly and tightly. Double-action screw mechanism. High accuracy..
Check Stock

Peachtree Woodworking Supply Pen Blank Centering Vise for Drilling Center Holes in Pen Blanks Using a Drill Press

  • Easily locate and drill pen blank centers and Drill through the exact center of your pen blanks with this simple but effective Pen Centering vise. By far one of the best selling pen vises available, this jig will be a go to tool when turning your pens..
  • The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise..
  • Just set up the vise once and drill all of your blanks in the exact center. There is no need to change the setup regardless of the blanks size or shape..
  • Holds blanks up to 1-1/2" square. The pen center vise includes a scrap board piece of mdf. It measures approximately 2" by 1/4"..
  • The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece. When you use up all of the surface, simply cut another piece out of 1/4" thick stock. Wooden base is removable and replaceable. If you need a larger base to clamp the vise to your drill press, simply remove the wooden base and replace it with a base made to your exact specifications.
Check Stock

Mini Vacuum Base Vise Portable with 360°Swiveling Head and Powerful Suction Multi-Angle Pivoting Small Vice

  • Vacuum Base Vise mounts on any smooth work surface for work holding where you need it, such as laminates, steel, granite, glass and others,Please wipe....
  • Ideal for glueing, soldering applications, repairs, assembly, and more all with ease..
  • Vise can be rotated 360-Degree and pivots 90-Degree positioning work without removing clamped part from the vise jaws.
  • Rubber Jaw Covers protect delicate items from damage and body parts are precision die cast for longevity.
  • Jaw Width: 2. 7”, Jaw Opening: 2. 7”, Throat Depth: 0. 5”.
Check Stock

Riverruns Fly Tying Vise

  • Aventik quality fly tying vise, made of hard andoziezd aluminum body and hard chromium carbon steel jaw materials can for a long time use. It is light weight only 9.63OZ (273g), compact and easy for travel..
  • This is a extremely durable and simple single lever action rotary fly tying travel vise to minimize weight whilst retaining tensile strength and durability, with hardened and tempered steel jaws. The vise is accompanied by a sturdy C-clamp to help anchor it in place. The in-line head assembly rotate 360 degrees, this allows the tier to view the fly from all angles, to finish fly tying without removing the hook. By rotating the screw, height of the vise can be adjusted..
  • The hard chromium carbon steel jaw accommodate size #22 to #3/0 fly hooks. Please note that this is an approximation as the gauge of the wire used to manufacture fly hooks do vary from brand to brand. We cancelled extra midge jaw program after first butch testing, it is not necessary. Since this Standard jaw has all the functions..
  • Length: 8.6 inch (21.5cm). Color: silver + black color. The vise is ideal for a beginner wishing to upgrade to a rotary vise or an experienced fly tier looking for an inexpensive vise or lightweight travelling vise for that trip away..
Check Stock

Dremel Flex Shaft Rotary Tool Attachment with Comfort Grip and 36” Long Cable - Engraver, Polisher, and Mini Sander- Ideal for Detail Metal Engraving, Wood Carving, and Jewelry Polishing , 225-02 , Grey

  • Main Parameter: Ball Diameter: 5" (130 mm).
  • Jaw Width: 2.5" (64 mm) 2-1/2” (64 mm).
  • Jaw Height: 1.5" (38 mm) 1-1/2” (38 mm).
  • Excellent Quality: Full set standard block ball vise engraving tool: This block is made of solid stainless steel, comes with a brake which allows you to control the rotational resistance..
  • Self-centering Jaw System: The mini ball vise has a self-centering jaw system made for stone setting, small engravings, and other precision work..
  • Rotational Brake System: The internal rotational brake system lets the user choose the amount of rotational resistance from free to locked. There is a double ball bearing system for smooth rotation without looseness or wear inside..
  • Wide Application: The engraving ball vise is perfect for stone setting, small engravings, and other precision work. Designed for a unique combination of solid work support in a small and maneuverable size. Its low profile is suited for microscope work..
Check Stock

COMOWARE 55 Pcs Pin Vise Hand Drill with Micro Drill Bit Set, Precision Jewelry Drill, Hand Drill for Jewelry Making, HSS Micro Drill Bits (0.3-3.0mm), Craft Drill for Resin Polymer Clay Craft DIY

  • 【DURABLE HAND PIN VISE】- The hand drill features aluminium body that is strong and durable. The 3-jaw hardened steel chuck delivers firm clamp on micro drill bits. And the anti-slip handle design helps the jewelry drill provide stable control on small, fragile and important projects..
  • 【PRECISION DESIGN】- The precisely designed chuck of this pin vise hand drill allows you to easily rotate the vise head with an adjustable clamp range of 0.3 - 3.4mm. These micro drill bits are made from HSS 4241 and roll forged for proven strength and durability. With sharp cutting edge and 118 degree point tip, these twist drill bits delivers clean drilling performance on precision work..
  • 【FULL SIZE SET】- The 55pcs pin vise hand drill with micro drill bit set includes 1 piece hand drill, 1 pair of tweezers, 1 portable storage case and 52 pieces of micro drill bits in 30 different sizes to satisfy all you demand. (1pc x 0.3mm, 0.35mm, 0.4mm, 0.45mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm, 2.5mm, 2.6mm, 2.7mm, 2.8mm, 2.9mm, 3.0mm.
  • 2pcs x 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm.
  • 3pcs x 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm.).
  • 【WIDE APPLICATION】- These mini drill bits are light in weight and compact in size. The multi-purpose craft drill is....
Check Stock

Fasmov Swivel 3\ Universal Table Vise Tilts Rotate 360° Universal Work

  • The Table Vise will not deform even under high pressure, the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel..
  • Jaws are 3" x 3/4" / 79mm x 17mm with a 2" / 51mm opening, the clip has a wide enough opening for any workbench or table..
  • Adjustable and rotates to any possible angle, rubber Jaws for no scratch and firm clamping, enabling you to lock the workpiece in any position..
  • Rubber on the jaws can be removed to reveal a cross pattern for use on wire/rods, The overall design of pliers has laid a good foundation for the smooth completion of your work..
  • Lightweight, small vise, easy operation, Ideal for holding small parts in Jewelry, Hobby, Model making, Electronics and more..
Check Stock