Top Pressure Filler
CWM Pot Filler Faucet Stainless Steel Commercial Wall Mount Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles
- Constructed by 1.5mm thick SUS 304 stainless steel tubes.
- Equipped with solid brass ceramic cartridge.
- Equipped with CWM Aerator provides a steady pressure and straight consistent 3.5 GPM water flow.
- 100% factory high pressure and low pressure tested.
- pure stainless steel construction with Polished Inner Surface, every drop of water passing through the pot filler is natural, no harmful materials added.
- dual swing joints allows the pot filler to easily fold away when not in use.
- NPT 1/2" conical connection thread (without brass fittings), can prevent water leakage without using water tape.
- NPSM 1/2" connection thread, need to use water tape.
- Fit for US Standard, with a installation flange for stability ..
Check StockJZBRAIN Pot Filler Faucet Wall Mount Stainless Steel Commercial Pot Filler 5.5 GPM Heavy Duty Style with Folding Stretchable Double Joints 2 Handles
- 【 Stainless Steel Pot Filler Faucet】Made of SUS 304 stainless steel, anti-oxidation, no rust.
- With polished Inner surface, sturdy and no leak.
- Lead-free construction, ensuring that every drop of water flowing from the faucet is clean and natural..
- 【Hight Flow Rate Pot Filler】Max 5.5 GPM, Equipped with Swiss Neoperl Aerator provides a steady pressure and straight consistent water flow, creates perfect aerated stream, quiet and no-splash. This is the pot filler you need for cooking happy time..
- 【Folding Wall Munt Faucet】The pot filler faucet with 21 inch foldable swivel arm design.
- 360 Degrees Swivels joints makes it easier to add water, easily switch spout over the pot and sink of your kitchen cooktop, suitable for almost home kitchens..
- 【Hight Quality Pot Filler Faucet】Constructed by 1.5mm thick SUS 304 stainless steel tubes.
- with solid brass ceramic cartridge. High density solid brass material, apply special lead-free filtering technique, ensures durability and easy cleaning..
- 【Wall Mount Pot Filler Faucet】One hole wall mount design easy to install.
- Water inlet is a 1/2'' - 14 NPT female. All installation kits are included in the package.
Check StockSONNET DESIGNS Pot Filler Faucet Wall Mount Pot Filler Chrome Finish Pasta Filler Faucet Solid Brass Double Joint 2 Handles Folding Stretchable Lever with Teflon Tape CUPC Certified
- ...y. Manufacturer: KAIPING AIDA SANITARY WARE TECHNOLOGY CO.,LTD, Brand: Aida, Model Number: F15047*03.
- 【HIGH FLOW RATE】This pot fillers faucets Max 4.2 Gallons per minute @ 60 PSI water flow fills large pot 3x faster than conventional over stove faucets. Neoperl Aerator provides Streamlined Water Flow with Steady Pressure, fills up the pot much easier.
- 【CONVENIENCE and EASY TO USE】The Potfiller Hose equipped with Double Valves and Dual Swing Joints with 26-inch swing arms and 360 degree spout rotation works well with more than 4 large burner stovetops. Two handles of Kitchen Pot Filler improve safety with ability to control flow rate and to shut off either at the wall or at the spout.
- 【CORROSION RESISTANT】Modern Polished Chrome Pot Filler Silver Faucet surface wipes clean easily, as well as resisting scratches, corrosion and oxidation. Faucet comes equipped with an aerator for steady pressure and consistent water flow.
- 【AVOID SPILLS】This Water Faucet Over Stove Cuts 50% trips hauling full pots across the kitchen from sink to stovetop, saving your health and avoiding unnecessary spills. Installing directly behind the stovetop brings water access where you need it and folding design frees up space.
Check StockProtecting Vidalia
- Allows you to hook up your Tapcooler counter pressure bottle filler to your keg, vs the faucet..
- Includes close to 78 in. of tubing so you'll have plenty of clearance from your Keg to your bottling area..
- Included valve hooks right up to the Tapcooler and is to open and close as you fill your bottles..
- Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling!.
Check StockStant 12270 30 Pound Cooling System and Pressure Cap Tester
- Allows you to test today’s car’s higher pressure cooling system.
- Color coded dial makes it easy to accurately test higher pressure caps and systems.
- Features a pressure release bar for releasing pressure build-up before removing the head from the neck.
- Comes in its own plastic case for easy storage and carrying.
- Set includes 1- 12559 spacer to drop in 1″ deep filler necks for testing, 1- 12552 cap adaptor to check standard “A” size caps, and a complete easy to use instruction manual.
Check StockQWORK Pot Filler Faucet Brass Commercial Wall Mount Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles
- LEAD-FREE BRASS BODY: QWORK pot filler body is made from high quality brass (lead content below 0.25%), safe for drinking water. High Quality Brass Material, Ensures Durability and Easy Cleaning..
- DUAL VALVES & 360° ROTATABLE: Double handle double valve design, control the flow switch with any handles. PLEASE turn off the both handles after finish using. Faucet Swivels 360 Degrees allows yourself to multitask by freeing up your kitchen faucet and sink for cleaning vegetables or rinsing pasta or even filling another two pots at the same time! The 20" length of this pot filler is designed to reach all stove burners for filling pots without much labor..
- 2.2 GPM HIGH QUALITY AERATOR: Equipped with high quality Aerator provides a steady pressure and straight consistent 2.2 GPM water flow.
- 100% factory high pressure and low pressure tested..
- EASY TO INSTALL: Single hole installation, standard 1/2 NPT connection thread, fits most water supply line, use for cold water OR hot water (maximum water temperature should not exceed 90℃)..
- 100% SATISFIED SERVICE: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you..
Check StockKeg in the Closet
- Allows you to hook up your Tapcooler counter pressure bottle filler to your keg, vs the faucet..
- Includes close to 78 in. of tubing so you'll have plenty of clearance from your Keg to your bottling area..
- Included valve hooks right up to the Tapcooler and is to open and close as you fill your bottles..
- Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling!.
Check StockStant 12043 Cooling System Pressure Tester Threaded 'Cap' Adapter, 1 Pack
- Stant engine cooling system pressure tester adapters make it quick and easy to hook up a Stant cooling system pressure tester to just about any Automotive cooling system.
- Many vehicles, due to manufacturer specific cooling system designs, require unique adapters to connect the vehicle's coolant filler neck to the coolant pressure tester.
- 12043 is a threaded adapter that allows the cooling system pressure tester to work on 2013 Ford escape and Fusion models as well as select Mazda vehicles.
Check StockCWM IMLEZON Wall Mount Pot Filler Faucet Matt Black Commercial Stainless Steel Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles, 22” (00101)
- Constructed by 1.5mm thick SUS 304 stainless steel tubes.
- Equipped with solid brass ceramic cartridge.
- pure stainless steel construction with Polished Inner Surface, every drop of water passing through the pot filler is natural, no harmful materials added..
- Equipped with IMLEZON Aerator provides a steady pressure and straight consistent 3.5 GPM water flow.
- 100% factory water pressure test and leak tightness test..
- dual swing joints allows the pot filler to easily fold away when not in use..
- 1/2-Inch - 14 NPT standard inlet female thread for wall mounted. It is recommended to use water tape..
Check StockWOWOW Pot Filler Faucet Matte Black Commercial Wall Mount Faucet Brass Pot Filler Black Folding Faucet Stretchable Double Joint Swing Arm Pot Filler Copper Rotatable Wall Faucet
- ... from sink to stove. It can retract when not in use, save your kitchen space.
- Matte Black Faucet Pot Filler: Low-key in a pure black finish, resists corrosion and not easy to oxidize, for creating a modern kitchen decorating style. Drip-free aerator provides a steady water pressure, no-splash and water saving.
- Wall Mount Pot Filler: US standard size brass threads 1/2'' NPS to 1/2'' NPT, single hole wall mount installation,with a installation flange for stability . NOTICE: Only fit for cold water.
- Warranty & Customer Service: 5-year warranty and timely customer support are offered. It is covered by 90-day limited return. Please contact us through your order, we will try our best to assist you.
Check StockCWM Stainless Steel Pot Filler Faucet Commercial Wall Mount Kitchen Sink Faucet Folding Stretchable with Single Hole Two Handles
- Heavy Duty Stainless Steel Pot Filler : Constructed by 1.5mm thick SUS 304 stainless steel tubes.
- Equipped with solid brass ceramic cartridge.
- Great Water Flow: Max 5.5GPM, Equipped with Swiss Neoperl Aerator provides a steady pressure and straight consistent water flow..
- Practical Design: There are two valves for double flow control, Double jointed spout water extends up to 21" and retracts when not in use..
- Hygienic: Pure Stainless Steel construction with Polished Inner Surface, every drop of water passing through the pot filler is natural, without lead or other harmful materials added..
- Assemble Dimension 1/2-Inch - 14 NPT inlet Single hole Stainless Steel Wall Mount Pot Filler Faucet.
Check StockOEMTOOLS 24441 Manual ATF Refill System, 8 Adapter Transmission Fluid Pump, Manual Fluid Transfer Pump Automotive, ATF Pump w/Shut-Off Valve
- MANUAL TRANSMISSION FILL PUMP: The manual transmission fluid transfer pump allows the operator to fill or top off transmissions with up to 3 liters (3.1 quarts) of fluid between refills.
- Multiple adapters to fit all of your transmission’s needs.
- PRESSURIZED FILLER SYSTEM: Pressurized operation frees users from continual pumping.
- Transmission flushing system works at a maximum pressure of 20 PSI.
- The gauge registers a maximum pressure of 30 PSI.
- Release excess pressure with the release valve.
- FITS MANY VEHICLES: This transmission fluid pump automotive tool includes adapters for use with many Ford, BMW, Honda, Nissan, VW, Porsche, Mini Cooper, Audi, and Mercedes-Benz transmissions.
- Included adapters cover the most common transmission systems.
- CONVENIENT FEATURES: ATF transmission fluid filler comes with a belt attachment for storing each ATF flush adapter on the oil dispenser tank.
- Transmission fluid flush kit hose features a swivel connector and a fluid dispensing shut-off valve.
- MULTI-PURPOSE TRANSMISSION FILL KIT: This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
- Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
Check Stock