Top Pressure Gauge Kit

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

Pressure Gauge Kit for Flair Espresso Maker NEO, Classic and Signature Models

  • CUSTOM PRESSURE GAUGE - Manage the quality of your espresso extractions by targeting the espresso zone when lowering the lever of your Flair Espresso Maker..
  • PRECISION EXTRACTION CONTROL - Use this pressure gauge with your Flair to more effectively dial-in your grind and brew repeatable results from your Flair NEO, Classic or Signature. Gauge face features a targeted espresso zone between 6 and 9 BAR, exactly that needed for a cafe-quality espresso..
  • ADVANCED BREWING TECHNIQUES - Use this pressure gauge with your Flair Espresso Maker to enhance your brewing abilities, including using different pressure profiles to bring out the most well-balanced flavors from your espresso..
  • UPGRADE IN QUALITY - The Pressure Gauge Kit features a stainless steel plunger to ensure minimum plastic contact with your espresso as well as a silicone pressure gauge guard to protect against damage..
  • NOT COMPATIBLE WITH PRO 2 MODEL - Use this pressure gauge with your Flair Espresso Maker Classic or Signature. Purchase a bottomless 2-in-1 portafilter to use with your Flair NEO..
Check Stock

Gobiger Aviator Sunglasses for Men 100%UV Protection Goggle Alloy Frame with Case…

  • CUSTOM PRESSURE GAUGE - Manage the quality of your espresso extractions by targeting the espresso zone when lowering the lever of your Flair Espresso Maker..
  • PRECISION EXTRACTION CONTROL - Use this pressure gauge with your Flair to more effectively dial-in your grind and brew repeatable results from your Flair NEO, Classic or Signature. Gauge face features a targeted espresso zone between 6 and 9 BAR, exactly that needed for a cafe-quality espresso..
  • ADVANCED BREWING TECHNIQUES - Use this pressure gauge with your Flair Espresso Maker to enhance your brewing abilities, including using different pressure profiles to bring out the most well-balanced flavors from your espresso..
  • UPGRADE IN QUALITY - The Pressure Gauge Kit features a stainless steel plunger to ensure minimum plastic contact with your espresso as well as a silicone pressure gauge guard to protect against damage..
  • NOT COMPATIBLE WITH PRO 2 MODEL - Use this pressure gauge with your Flair Espresso Maker Classic or Signature. Purchase a bottomless 2-in-1 portafilter to use with your Flair NEO..
Check Stock

Oil Pressure Gauge Adapter, 1/8in NPT Female to M10x1.0 Male Reducer Oil Pressure Gauge Adapter Replacement Black

  • [ IMPORTANT ] VMS RACING Brand Design (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • High Quality Silver Face 0-60 Psi Triple Chromed Oil Pressure Gauge with TWO Triple Chromed Plated Fittings and O-ring included to match the gauge and for a long-lasting finish. EVERYTHING IS TRIPLE CHROMED... EVEN ALL OF THE FITTINGS so you will NOT see any brass . Beautiful finish to compliment your most prized Harley. PERFECTLY DRESSED FOR ANY OCCASION. If you have other nice chrome pieces on your ride, this gauge will feel right at home and a must-have..
  • Measurements: Gauge face (w/ bezel) - 1.66" (42.25mm) Gauge Case - 1.62” (41mm) Gauge Depth ~ 1” (25mm) Fitment: Fits (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY. Fittings allow for a FLAT MOUNT (or) 45 Degree Mount depending on the application. Triple-chromed / Brass INTERNALS. 1/8 NPT main Male Fitting.
  • VMS RACING Oil Pressure Gauge Kit Provide you with a MORE ACCURATE OIL PRESSURE READING than Liquid Filled Oil Pressure Gauges. Liquid Filled Gauges tend to lose the liquid due to Engine Vibration. You eliminate that problem with this gauge. This Kit allows for accurately measuring Oil pressure in your Big Twin Engine. ....
Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27....
Check Stock

X27 168 Stepper Motor Kit, Instrument Cluster Gauge Repair Kit Compatible with 03-06 GM Chevy Silverado (35 Led Light Bulbs+7 Motors+Soldering Iron+Solder Sucker+Remove Tool+Flux Rosin Core Solder)

  • ...2003 2004 2005 2006 GM GMC Chevy Silverado Trailblazer. Came in your vehicles, Please check whether this X27 168 Stepper Motor Kit fits your vehicles before buying.
  • APPLIED TO - The latest stepper motor, direct replacement for the older and faulty stepper motors. Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge. These gauge cluster repair kit have been redesigned for maximum reliability and quiet operation. Insert the needle as long as you pay attention to the zero pressure can be pressed, remember not to edge pressure.
  • FIX GLITCHES - High-quality motors that meet strict international quality standards to fix common problems caused by stepper motor of your vehicles: gauges dead, chatter, sticking, false / jumpy / inaccurate readings, pegged out to the left or right of the dial, ratchet up or down, sticky needle movement, erratic gauge movement etc. Each gauge of your instrument cluster need one stepper motor. Since one stepper motor went out, and it will result all other stepper motors go out soon.
  • YOU WILL GET - Complete instrument cluster repair kit includes 7 * Motors.
Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 mal....
Check Stock

KIMISS Fuel Injection Pump Pressure Tester Gauge Kit TU-114 Petrol Diesel Fuel Pressure Gauge Tester Fuel Injection Pump Diagnostic Tool Kit

  • ❤ 【With Automatic Diagnostic Function】❤ --- TU-114 Fuel Pressure Gauge Auto Diagnostics Tools For Fuel Injection Pump Tester. The pressure....
  • ❤ 【Protective】❤ --- The components are fitted with quick coupling systems and safety valves to prevent inadvertent discharge of fuel under....
  • ❤ 【Safe Fuel Recovery】❤ --- The gauge comes with a pressure release valve on the side of the gauge, also a long drain hose for safe fuel....
  • ❤ 【Connections For Tu-114 Fuel Pressure Gauge Tool Kit】❤ --- 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve....
  • ❤ 【Reading Range】❤ --- Fitted with 90mm gauge having two scales (psi and bar), reading from 0~140psi and 0~10bar. Pressure gauge adopts rubber....
Check Stock

Upgraded 60in Fit for Soda Stream Adapter Hose Kit with Pressure Gauge CGA320 to TR21-4 Soda Maker Co2 Tank Direct Adapter Hose Maximum Working Pressure 4500PSI

  • Upgraded design: 3000psi pressure gauge and exhaust valve can monitor the working pressure of the hose at any time, know the gas pressure in the tank....
  • Applicable: Standard CGA-320 external hose can be used for large CO2 storage tanks (including CGA-320 in the United States, Canada, Brazil, Colombia,....
  • Material: The 60in fit for soda stream adapter hose kit is made of stainless steel and solid brass, resistant to high pressure, high temperature,....
  • Big Pressure Gauge: The fit for soda stream adapter is equipped with Big Pressure Gauge, which is convenient to observe the air pressure during use....
  • Easy to use: Upgraded 60in fit for soda stream adapter hose kit is easy to install, plug and play.
Check Stock

52mm 3 in 1 Auto Meter Gauges Fit for 12V Cars, Volt Meter Water Gauge Oil Pressure Meter Triple Gauge Kit Black Console

  • 3 in 1 Auto Gauge Kit: This auto meter gauge kit include voltmeter, temperature gauge and oil pressure meter, can monitor voltage, oil pressure and water temperature at any time.
  • Wide Measuring Range: The measuring range of the voltmeter is 8-16 volts, the measuring range of the water level gauge is 100 to 250, and the measuring range of the oil level gauge is 0 to 100 PSI.
  • Accurate Reading in The Dark: The scale is clearly displayed, and the dial is equipped with a lighting device, which is convenient for reading data in the dark, and these voltmeters with high sensitivity, can provide accurate data for driving safty.
  • Fitment: These auto meter gauges fit for most 12V cars, the black shell is made of high-quality plastic and metal materials, durable and easy to use.
  • What You Will Get: You will get 1* 3 in 1 auto gauge kit, 1*three hole gauge bracket, 1* sensor, 1* 1/8" NPT sensor thread, 1* installation instruction and 24-month service, if you have any questions please contact us, we'll reply to you as quickly as possible.
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).
  • 4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
  • Steady, regular drop indicates that the valve is held open, burnt, or chipped.
  • Wide pressure fluctuation at high speeds indicates a weak valve spring.
  • Steady drop to zero pressure indicates a choked muffler.
  • EASY TO USE: Assembly and operating instruction manual included.
  • Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
Check Stock