Top Pressure Pipe

Manoch 12 Volt High Pressure Self-Priming Electric Car Portable Wash Washer Kit Water Pump Inlet Water Pipe:1.5 Meter/4.9 Feet Outlet Water Pipe:8 Meter/26.25 Feet Power Cord Length:3 Meter/9.8 Feet

  • Features 12V DC diaphragm water pump, build-in pressure switch in the pump, when you close the switch on the outlet pipe, the motor will automatically power off and stop working Thick wires(0.75mm2), safety, reliability, high temperature-resistant, short-circuit-proof Suitable for Watering flowers, car cleaning, cleaning air conditioner, washing bathroom, window cleaning, washing floor.
  • Instruction The pump outlet is in the direction of the arrow Wire regardless of polarity. The pump can be placed in any direction Attention Not allowed to soak into water. Not allowed to freely adjust the pressure screw. The pressure was set when it comes from factory. Any wrongly adjust may easily turn back pressure and result in burst water pipe. The water inlet filter must be installed, to avoid of entering the impurities..
  • Specifications Inlet water pipe: 1.5m/4.9' Feet Outlet water pipe: 8m/26.25'Feet Power Cord Length: 3M/9.8' Feet (With ON/OFF Switch) Dimension: 160 x 100 x 60mm/.
  • Dimension: 160 x 100 x 60mm/ Power: 70W high pressure water pump with build-in Pressure Switch Current range: 6A Power: 70W Working Voltage: DC 12Vo Pressure Rating: 0.9Mpa (Max) Flow: 6L/min Life Span: 5 Years.
  • Package included 1 x 70W Washing Pump 1 x Water Gun 1 x Power Cord.
Check Stock

3/4 Inch Mallealbe Cast Iron Pipe, Pre Cut, Industrial Steel Black Fits Standard One Half Inch Black Threaded Pipes Nipples and Fittings, Build Vintage DIY Furniture, 10 Pack (16 Inch Length)

  • Schedule 80 PVC pipe is used for industrial and higher pressure water flow applications. Schedule 80 PVC pipe can handle 140 degrees F in temperature. The pipe comes in standard 1’ or 5’ sections and is available in plain end so a coupling is needed for installation. Pipe sizes range from ½” through 4”. Ease of installation and many application uses are just two great benefits of this pipe. Schedule 80 PVC pipe is designed to handle pressure applications as well as many chemical.
Check Stock

Floor Flange Trim Plate, Steel, 3/4 In

  • Price For: Each Inside Dia.: 3/4" Max. Pressure: 150 psi Pipe Type: Pipe Nipple Pipe Size (Nominal): 1/2" Seamless/Welded: Welded Outside Dia.: 3/4" Pipe Schedule: 40 Wall Thickness: 1/16" Temp. Range: -60 Degrees to 450 Degrees F Overall Pipe Length: 4" Pipe Connection Type: Threaded on Both Ends Standards: ASTM A 312 Item: Nipple.
  • Country of Origin (subject to change): China.
Check Stock

GooMeng R1234YF Car AC Refrigerant Charge Hose Kit,Auto 1/2” LH R1234YF Air Conditioning Refrigerant Charging Hose with Gauge

  • The hose adopted high quality rubber material,high pressure resistance and reliable. For use in adding R1234YF refrigerant to vehicle or home air-conditioning with highly working performance.
  • Easy and convenient to use. Come with gauge for easily viewing during use.Low side gauge monitors pressure to aid in getting a correct charge.
  • This System Refrigerant Charging Pipe with built-in safety valve to prevent accidental venting of refrigerant.The connector to the Freon gas tank is adjustable.
  • Bottle opener thread:1/2” LH(Left-hand thread Only!).Adapter:R1234YF LOW SIDE.
  • Pressure gauge:200PSI,Y50MM.Pipe pressure:600-3000PSI.Pipe length:L15cm,R15cm.
Check Stock

CHARLOTTE PIPE 2 SCH 40 COUPLING SXS PRESSURE ( 1 Unit Piece )

  • White fittings that are used in potable water applications only.
  • For use where systems will not exceed 140° F.
  • PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
  • MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..
Check Stock

USA SEALING ZUSA-TF-PTC-526 Nylon Push to Connect Tube Fittings Female Branch Tee Black 1/4 PTC x 1/4 NPT Female

  • Pipe Thread Material: Nickel-Plated Brass.
Check Stock

ChgImposs Mist Coolant Lubrication Spray System With Check Valve and Stainless Steel Flexible Pipe for Metal Cutting Engraving Cooling Machine/Air Pipe CNC Lathe Milling Drill

  • Save 60-80% lubricants compared with the oldest lubrication tube. Flexible Pipe Length: 1.5m / 4.92ft.
  • Stainless steel flexible pipe is more resistant to high temperatures..
  • Air flow and spray mist volume adjustable design, easier to use..
  • In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure).
  • Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing..
Check Stock

TAISHER 2PCS Forging of 304 Stainless Steel Compression Tube Pipe Fitting Connector 1/4 Tube OD x 1/4 NPT Male Straight Adapter

  • Widely used ——This pipe fitting is suitable for fuel/air/liquid/oil/gas/vacuum pipelines, with good air tightness, pressure resistance, and not easy to trip.
  • Product Material —— Forging of 304 stainless steel strength and resistance to corrosion..
  • Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c..
  • Maximum Pressure —— Maximum working pressure is 2800PSI..
  • Function —— Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic pipes of the same diameter, hex nut construction creates a tight seal, one end is connected to the pipe and the other end is an NPT male connector.NPT thread size is not the actual diameter, it is only the nominal pipe size..
Check Stock

Upgrade Version Mist Coolant Lubrication Spray System With Check Valve and Stainless Steel Flexible Pipe for Metal Cutting Engraving Cooling Machine/Air Pipe CNC Lathe Milling Drill

  • Stainless steel flexible pipe is more resistant to high temperatures..
  • In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2 (atomization and gas, associated gas pressure).
  • Air flow and spray mist volume adjustable design, easier to use..
  • Great for CNC Lathe Milling Drill Machine. Usually used in lathe, milling, grinding, drilling, boring, and tapping processing..
  • Save 60-80% lubricants compared with the oldest lubrication tube. Flexible Pipe Length: 1.5m / 4.92ft.
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

PVC Pipe Schedule 80 Industrial Grade Grey (.75) Grey/PVC - 1FT, Gray

  • Schedule 80 PVC pipe is used for industrial and higher pressure water flow applications..
  • Schedule 80 PVC pipe can handle 140 degrees F in temperature..
  • The pipe comes in standard 1’ or 5’ sections and is available in plain end so a coupling is needed for installation..
  • Pipe sizes range from ½” through 4”..
  • Ease of installation and many application uses are just two great benefits of this pipe..
Check Stock

Genova Products 30190 PVC Slip Coupling, 2-1/2"

  • Ideal for cold water pressure applications.
  • Used in irrigation, underground residential sprinkler system, water service pipe, deionized water lines, swimming pool installations and some chemical drainage systems.
  • INSIDE MEASUREMENT – 2-1/2″ slip x 2-1/2″ slip.
Check Stock