Top Pressure Plasma System

Reboot Plasma Cutter Machine 50Amp Plasma Cutting Equipment CUT50D 3/5'' Cut 110/220V High Frequency 1/2'' Clean Cut,IGBT Air Plasma Cutting Machine for Aluminum Alloy Mild Steel Cast Iron

  • [Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture.
  • [SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car..
  • [Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V.
  • [Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • [Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

Amico PT31-13 13 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 13 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Amico PT31-25 25 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 25 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Amico PT31-15 15 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 15 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Amico PT-31-20 20 Feet Plasma Cutting Torch Gun For CUT-30 40 CTS-160 180 & APC-30/40

  • 20 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • Non-Touch Pilot Arc: 50Amp plasma cutter, pilot arc technology allows you to cut without touching the tip of the metal, effectively cutting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the p....
Check Stock

AMICO PT31-13 13 ft Plasma Torch Gun PT-31/LG-40 For CUT-30/40 CTS-160/180 & APC-30/40

  • 13 Feet PT-31/LG-40 plasma torch assembly, max. 239 psi air pressure, 60% duty cycle at 40 amp.
  • High frequency ignition, very easy to start arc, post flow: 40 sec. recommended.
  • The cutting torch head is made of high quality material, with good flame retardation.
  • Plasma cutting is characterized with high cutting speed, high precision, good cutting effect and small thermal deformation..
  • Special customized for AMICO CUT-30, CUT-40, CTS-160, CTS-180, ACP-30A, APC-40A.
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

Online Beauty Skin Tightening Organic Wrinkle Reducing, Slimming, Firming, Stretch Mark Diminishing, Permanent Makeup Tattoo Removal - Eyebrows, Eyeliner, Lips Course Certification {online Code}

  • Advanced Beauty Education Platform – The career online beauty training provides a genuine certification so you can become a Fibroblast Plasma Pen Technician for toning and tightening skin, treating age or sun spots, removing tattoos, and even diminishing stretch marks..
  • Professional Skincare Training – Our accessible beauty education course helps you learn how to safely and effectively implement the non-invasive, non-surgical plasma pen skin-tightening and restoration system..
  • TATTOO REMOVAL – Helps fade permanent makeup tattooing from microblading eyebrows, eyeliner, lips and other face & body areas..
  • REDUCE AGE SPOTS, FIRM WRINKLES, FINE LINES & SAGGY SKIN- Fibroblast plasma is a natural organic, non-invasive and effective treatment. Helps to reduce the appearance of puffiness, dark circles, under eye bags, saggy skin and fine lines & wrinkles over time by boosting circulation and collagen resulting in a firmer younger rejuvenated look..
  • Holiday New Year Gift – Beauty Career Online Training Fibroblast Plasma Technician Course is a great holiday gift for mom, dad, daughter, son, wife, husband, high school graduate, college students, retired individuals, beauty professional salon owner, health care professionals or friends ....
Check Stock

Lighter Darling

  • 【360°Rotatable Bendable Neck and Widely Use】 The Arc Lighter with 360°Rotatable Neck can be bend to any angle you want to meet different....
  • 【USB Rechargeable and Convenient Design】 The eco-friendly candle lighter with powerful USB rechargeable Li-ion battery can be recirculated 500....
  • 【Windproof and Plasma Technology】 The Arc lighter adopt flameless plasma technology to protect the electric pulse from being blown out by strong....
  • 【Safety and User-friendly Design】 The candle lighter with Child-proof switch at the on/off button protects children from igniting....
  • 【What Will You Get 】- 1x SUPRUS arc lighter, 1x USB charging cable, 1x User Manual.When you have any issue with your lighter or service system....
Check Stock

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock