Top Pressure sensitive Adhesive Spray

LUBEMIDA EVA Foam Boat Flooring Sheet Marine Faux Teak Decking Carpet for Yacht Floor,94.5"x35.4" Adhesive and Bevelled Edge (Light Gray +White)

  • 【Beveled Design】 Bevel trapezoidal groove is patented design for EVA Boat Flooring . More beautiful - Look like real teak.
  • Less Maintenance -There is nowhere to hide the dust and debris ..
  • 【Size and Material】 94.5"(L)x35.4"(W) 240cm(L)x90cm(W).
  • Thickness: 6mm（±0.5mm）EVA Foam (ethylene vinyl acetate) is a dense and comfortable material.
  • 【 Easy to Install 】Its backing is a strong pressure sensitive adhesive.
  • Easy to cut to a suitable size with utility knife.
  • Work with additional adhesive (like silicone rubber sealant or spray adhesive ) ..
  • 【Upgrade Your Boat】Bring a new look to your older boats.
  • No more blemishes, cracks and other imperfections after laying down EVA marine boat flooring ..
  • 【 Wide Applications 】If you are boat owner, you must have a place for EVA decking carpet. Including Marine yacht Swim platforms , Cockpit , Aft Deck , Bows , Steps , Helm station pads , Poling platforms , trailer and pontoon ..
Check Stock

Crescent 8 Melton Mounting Board, 20 x 32 Inches, Ultra Black, Pack of 10

  • Features pressure sensitive, acrylic adhesive on one side of a 24pt SBS, solid bleached sulphite, board..
  • Surface is extremely smooth, virtually eliminating the orange peel look normally associated with poor quality substrates..
  • Pressure sensitive adhesive is specially formulated for the photographic industry and will not interact with photographic emulsions or digital prints..
  • Boards also work great for keeping art papers and stitchery fabrics smooth and wrinkle-free for professional looking mounting and framing..
Check Stock

CDS Tactical Products ProMag AA9130 / AA98 Archangel Cheek Pad for Mosin-Nagant/Mauser K-98 and Variants (1/8' Neoprene)

  • 1/4", 1/8" & 1/16" are made from exterior grade closed cell Neoprene.
  • 1/4", 1/8" & 1/16" have rubber based pressure sensitive adhesive backing for permanent installation.
  • 0.020" is made from textured Vynil with Acrylic based pressure sensitive adhesive backing for semi-permanent installation.
Check Stock

LUBEMIDA EVA Foam Boat Flooring Sheet Faux Teak Decking Carpet for Marine Yacht Floor 94.5"x35.4" (Light_Grey + Black_Stripes)

  • 【 Easy to Install 】Its backing is a strong pressure sensitive adhesive.
  • Easy to cut to a suitable size with utility knife.
  • Work with additional adhesive (like silicone rubber sealant or spray adhesive ) ..
  • 【 Free Maintenance 】EVA foam boat flooring look like real teak while fitting with your lifestyle. With EVA teak decking mat , you can say goodbye to hours of difficult and labor intensive maintenance , and get back to enjoying your boat ..
  • 【 Wide Applications 】If you are boat owner, you must have a place for EVA faux teak decking carpet. Including Marine yacht Swim platforms , Cockpit , Aft Deck , Bows , Steps , Helm station pads , Poling platforms ,Footwells , trailer and pontoon ..
Check Stock

Very High Bond Sticky Adhesive, AZXYI 9 Pack Socket Sticky Adhesive Replacement Kit, 6 PCs Double-Sided Stickers for Socket Base and 3 PCs Adhesive Pads for Car Magnetic Phone Holder

  • 【Compatible With Socket Mount Base】AZXYI offers 6 Pcs big round adhesive pads(Diameter: 1.4 inches) with pressure-sensitive adhesive on two sides for attaching socket mount to your smartphone..
  • 【Compatible With Car Magnetic Phone Holder】AZXYI offers 3 Pcs small sticky adhesive (Diameter: 0.9 inches) for attaching universal magnetic car mount holder to clean surface such as — your car dashboard, mirror, wall or locker..
  • 【6 Pcs Alcohol Prep Pads】To maximize adhesive contact, please clean the adhesive surface with alcohol pad before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck..
  • 【Very High Bond】These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various substrates/surfaces, stable even in bumpy roads and actually builds strength over time..
  • 【Durability】These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind..
Check Stock

MATEPLEX Tape in Extension Remover，Fast Acting Hair Glue Remover, Wig Glue Remover, Lace Glue Remover, Hair Dissolvent for Lace Wig, Closure Hairpiece and Toupee Systems (118ml)

  • 【Fast-acting Hair Extension Remover】 Our tape in hair extension remover is formulated using citrus oils and extracts, lace wig glue remover can remove adhesive bonding residue from a variety of cosmetic wig hair systems, leaving your wig unit unharmed and edges intact, simple and fast, save a lot of time for your beauty..
  • 【Two Ways to Remove Glue】 Our wig glue remover comes with 2 nozzles. Two ways to use for you to choose, pointed cap: apply to disassemble all kinds of hair extensions, tape hair.
  • spray cap: the spray cap is suitable for removing glue residue from wigs or your own hair. The included small comb removes hair residue faster..
  • 【Safe and Non-irritating】 Our tape hair remover has no harsh chemicals or toxins, no sensitive substances, and oil-based fast remover is comply with national safety standards, can be used for sensitive skin, also hair glue remover has a light and citrus smell..
  • 【Easy to Use】 Spray or point coatingon the area with the hair extension remover. Reaction time is as little as 1 minute depending on adhesive build-up. Adhesive will dissolve causing the lace to lift. Wipe or brush off the residue, follow with shampoo and rinse. Repeat the above operations if necessary. You can check out the video on the product....
Check Stock

Velcro USA Hook 70/WI225 70/71 TEXACRO Adhesive-Backed Hook-Side Only: 2" x 75 ft. / Hook-Side only, White

  • Velcro Brand’s TEXACRO 70/71 is a pressure-sensitive hook-n-loop nylon fastener closure system manufactured with woven nylon yarns and bound by an acrylic binder coating..
  • *** The hook and loop parts are sold separately (the rougher side is the hook and the softer fuzzy side is the loop)..
  • HOOK 70 and LOOP 71 can be sewn to fabrics or applied to rigid surfaces using the factory applied rubber-based adhesive. Can be straight-cut or mated and cut. High tensile strength material for reusable fastening of many products including quick changes of props in the theater industry..
  • Long length, 25 yards (75 feet), for numerous applications. Backed with pressure-sensitive rubber adhesive and protected by a removable liner..
  • Carrier/Backing: Velcro nylon. Adhesive: rubber. Release Liner: film. Thickness: 68 mils (carrier, adhesive). Adhesion: 20 ounces per inch (to stainless steel test panel). Shear: 13 pounds per inch..
Check Stock

SCREEN PRINTERS' ADHESIVE, 14 oz. can, 1 count

  • Specifically designed as a pressure-sensitive pallet adhesive that does not stain.
  • Offers quick tack, has low soak-in and will not wrinkle fine materials.
  • Camie 380 remains pressure-sensitive for an extended period of time.
  • Excellent for making short-term bonds and releasing from the garment.
Check Stock

I Like That Lamp Styrene Sheet for Lampshade (13.5" Height x 40" Length) - Adhesive Roll for DIY Round Drum Lamp Shade - Repair Damaged Shades - Make a New Lampshade - Compatible With All Materials

  • DIY LAMPSHADE STYRENE: Pressure sensitive adhesive styrene for lampshades is a thin polystyrene sheet with a sticky adhesive backing. It's the most commonly used lampshade liner in professionally manufactured lampshades because it's flame-resistant, durable, and translucent enough for the light of a bulb to pass through. Reveal the adhesive backing on the styrene by peeling back a release liner, then apply your choice of material to the styrene to make professional quality lampshade..
  • MATCH YOUR DECOR PERFECTLY: With DIY lampshade making supplies, you have complete control over the height, length, colour and pattern so you can make a custom lampshade that perfectly suits your unique style & decor. As a lampshade liner, adhesive styrene has limitless creative potential. The pressure sensitive adhesive will attach to a variety of materials, including velvet, paper, burlap, leather & more. Light-medium weight cotton is the easiest to work with but the possibilities are endless!.
  • RESCUE OLD LAMPSHADES: The lampshade materials in old shades tends to crack and yellow after many years of use, but that doesn't mean you have to buy a brand new lampshade. Before throw....
Check Stock

GolfWorks Double Sided Grip Tape Golf Club Gripping Adhesive - 48mm x 18yd Roll 2 Pack…

  • HIGH QUALITY: 6.0 mil crepe paper, double coated with pressure sensitive natural rubber adhesive and easy release double liners.HIGH QUALITY: 6.0 mil crepe paper, double coated with pressure sensitive natural rubber adhesive and easy release double liners..
  • SOLVENT ACTIVATED: All golf tape strips work best with premium HF-100 golf grip solvent when regripping golf clubs.
  • MADE IN THE USA: Brampton golf grip tape strips are manufactured by Intertape, the industry standard for golf grip tape.
  • EASY PEEL: Perforated liners effortlessly peel away for simple golf club regripping.
  • MULTIPLE SIZES: Brampton golf grip tape strips are available in packs of 15 and 60 to meet any golf club regripping project.
Check Stock

3M Foil Tape [UL 181 A & B listed/Linered] (3340): 2-1/2 in. x 30 ft. (Silver)

  • 3M 3340 Foil Tape is a high temperature, high strength aluminum foil tape coated with a cold weather acrylic pressure sensitive adhesive. This tape is constructed using a 2.0 mil aluminum foil backing with a strong, pressure sensitive acrylic adhesive for long-term adhesion, along with for releasing poly coated kraft paper liner to protect the adhesive and keep the tape ready for use. The aggressive acrylic adhesive performs in both cold and hot temperature conditions..
  • An essential requirement for sealing ducts and other surfaces for heating, ventilation and air conditioning systems is foil tape that can stand up to hot and cold temperatures. The foil backing of 3M 3340 serves as an excellent barrier against moisture, dust, and many chemicals. The very low moisture vapor transmission rate makes the tape a good sealant and the acrylic adhesive supplies superior temperature and UV resistance to give you a strong, lasting, and reliable bond..
  • 3M Foil Tape is used in industries such as transportation, metalworking, construction, automotive, military and government, general industrial, electronics, aerospace, and more..
Check Stock

Shepherd Hardware 9966 3/4-Inch SurfaceGard Non-Adhesive Round Transparent Bumper Pads, 10-Count

  • 3M Bumpon SJ Series Self-Adhesive Bumpers are pressure sensitive adhesive-backed polyurethane products that can be used as feet, stops, spacers and protectors in many applications..
  • The aggressive, high tack pressure sensitive adhesive is protected with a release liner making application fast and easy. The plasticizer-free urethane composition of the bumpons exhibits excellent skid resistance, long aging resiliency (will not crack or harden), abrasion resistance and resistance to marring and staining..
  • Use 3M Bumpons almost anywhere slamming, scratching, nicking, scuffing, marring, sliding, vibration, or noise could be a problem for your product..
  • Application Instructions: (1) Apply to any smooth, flat surface such as glass, metal, wood, smooth plaster, tile, etc. (2) Surfaces must be clean and dry. With a clean cloth, use a low strength solvent like isopropyl alcohol (rubbing alcohol) or heptane (white gas). (3) Do not attempt to use on fabric, course concrete walls, rough sand finishes, loose paint or rough wallpaper. (4) Remove paper liner. Avoid touching adhesive with fingers. Place bumper desired location and press firmly..
  • Uses and Applications: Feet on the bottom of blenders, desk-top calculators, electronic cabinetry, telephones, keyboards, ....
Check Stock