Top Printed Circuit

PFC-100 Platinum Series Camo Kryptek Highlander A

  • High performance Fluid Dynamic Bearing (FDB) fans are designed to take advantage of the impact absorbance effects of oil.
  • The Seasonic PRIME Series is designed with very favorable level of acoustics and it uses carefully selected components and innovative circuit design....
  • Seasonic's latest design keeps the output voltage within a very tight range, achieving under 0.5 % (1 % for 1000 W and above) load regulation.
  • Seasonic's engineers have implemented a new design feature, where instead of cables.
  • the back panel and the PCB (Printed Circuit Board) are connected....
Check Stock

LC200A Inductance Inductor Capacitance Capacitor L/C Multimeter Meter Tester

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

Hakko-CHP-170 Micro Cutter - Red & NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098\ Width, 10' Length

  • Depaneling tool separates printed circuit boards (PCB) in multiple circuit board production.
  • 40kg cutting force uses shearing action to prevent delamination of the board material.
  • Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.
Check Stock

Hakko CHP DP-24-N Depaneling Tool, Printed Circuit Board (PCB), 2.4mm Width, 2.5mm Isthmus Cut, 40kg Cutting Force

  • Depaneling tool separates printed circuit boards (PCB) in multiple circuit board production.
  • 40kg cutting force uses shearing action to prevent delamination of the board material.
  • Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces.
Check Stock

uxcell 5 Pcs Red DIP Switch 1Positions for Circuit Breadboards PCB

  • 1 Positions ( 1 Row 2 Pins)，Package Content: 5 x DIP Switch.
  • 1Way 2 Row Dip Encode Switch, Red color..
  • This DIP switch is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific situations.Widely used in data processing, communication, remote control and anti-theft alarm system need to manually automatic programming products..
  • Widely used in circuit boards, breadboards and all pcb projects, perfect as a toggle or on off switch for your projects..
Check Stock

Electop 6 Way Fuse Block Blade Fuse Box with Negative Bus 6 Circuit Fuse Holder Fuse Block w/Negative Bus Waterproof Protection Cover Sticker Labels for 12V/24V Automotive Car Truck Boat Marine RV

  • ...f environment friendly PBT material, this fuse holder meets all the standards of an ideal fuse box. It is mechanically strong, insulated, heat resistant and flame resistant. There will hardly cause any issue like produce fracture, deformation, combustion or short circuit phenomenon..
  • ★【PROTECTION COVER & PRE-PRINTED DIY STICKERS】Transparent plastic cover with screw nut, easy to operate, splash and dust-proof design. Adds extra protection to your fuse box & fuses. Come with multi-function stickers for DIY your specific need, convenient for examination and repair, easy to troubleshoot in outdoor..
  • ★【WIDE APPICATION】This 6 Circuit Fuse Block widely used in Car, Truck, Boat, Tankers, Marine, SUV, Yacht, RV, Van, Ships etc. Each fuse of fuses box can be connected to any circuit of electrical appliances. For example: car dome light, auto headlight, width lamp, fog lamp, warning lights, car refrigerator, car charger and car fan, car TV.etc..
  • ★【PACKAGE INCLUDED】Package includes 1 x 6 Way Blade Fuse Block with Protection Cover, 4 x 20A Fuse, 2 x 15A Fuse, 2 x 10A Fuse, 4 x 5A Fuse, 4 x Screw, 2 x Sticker. If you have any questions about this 6-way fuse box holder, please feel free to contact us. Our costumer service team always be there....
Check Stock

uxcell 50 Pcs Red DIP Switch 1 Positions for Circuit Breadboards PCB

  • 1 Positions ( 2 Row 2Pins)，Package Content: 50x DIP Switch.
  • 1Way 2 Row Dip Encode Switch, Red color..
  • This DIP switch is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific situations.The DIP switch is a durable device, constructed with a combination of metal and plastic materials. It is highly portable and designed for an extended lifespan..
  • Widely used in circuit boards, breadboards and all pcb projects, perfect as a toggle or on off switch for your projects..
Check Stock

MESR-100 Capacitor Tester,Geevorks Circuit Tester Ohm Meter 0.001-100.0R with SMD Test Clip,Auto-Ranging Capacitor for Measuring Capacitance Resistance Circuit

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick 2.0mm/2.5mm/3.0mm Width 1.5m Length with Flux - Desoldering Vacuum Pump Solder Removal Tool

  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size.
  • geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs.
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable.
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering.
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size.
Check Stock

uxcell 2 Pcs Black DIP Switch 1 Positions for Circuit Breadboards PCB Surface Mounted Devices Type

  • 1 Positions ( 1 Row 2 Pins)，Package Content: 2 x DIP Switch.
  • 1Way 2 Row Dip Encode Switch, Black color..
  • This DIP switch is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific situations.Widely used in data processing, communication, remote control and anti-theft alarm system need to manually automatic programming products..
  • Widely used in circuit boards, breadboards and all pcb projects, perfect as a toggle or on off switch for your projects..
Check Stock

AudioPipe APTV-1000.2 Full Range IP67 Waterproof Marine Bridgeable Class D Amplifier for ATVs UTVs Boats and Motorcycles Black

  • CLASS D WATERPROOF AMPLIFIER: Bridgable class D amplifier ideal for side-by-sides, UTV's, ATV's, boats, or motorcycles.
  • RMS POWER SPECS: Output power (RMS): 100 watts x 2 channels at 4 ohms, and 160 watts x 2 channels at 4 Ohms.
  • MULTIPLE PROTECTIONS: Thermal, over current, and short circuit protection ensure your equipment is safe and secure.
  • LOW RESISTANCE TECHNOLOGY: Features surface mount technology (SMD) with a 4 layer fiberglass printed circuit board (PCB) design.
  • AMPLIFIER SPECIFICATIONS: Adjustable HP/LP frequency control.
  • Frequency response: (-3dB) 20Hz to 20KHz.
Check Stock

Sainwora 10 Pcs Soldering Accessories Kit Includes Desoldering Pump,Pocket Pack Solder and Repair Tools Solder Sucker Tool Kits

  • ★【High Quality】Super high pressure vacuum with aluminum body frame，can remove solder from a printed circuit board effectively.
  • ★【Excellent Function】Excellent thermal transfer for faster, safer desoldering using lower temperature irons.durable and not easy to age.
  • ★【Powerful Suction】Made of high temperature resistant nylon material.Heated up the solder pushed the button,all solder sucked up,super easy to....
  • ★【Low Residue】Solder sucker desoldering pump helps to clean the solder and avoid short circuit, Anti-scalding and high temperature resistant tin....
  • ★【Special Design】Right or Left handed design allows easy one-handed use.Easy to disassemble and clean, easy to disassemble by slight rotation,....
Check Stock