Top Printing Servo Motor Printing

[2-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

ETMall 6PCS MG996R Servo Motor Metal Gear Servo Motor Torque Digital Servo Motor High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter Compatible Arduino Raspberry Pi Project

  • WHY CHOOSE IT: This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy allincrease).This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
  • WIDE APPLICATIONS: The MG996R Servo model Good performance digital standard servo, compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • ELECTRICAL SPECIFICATION: The MG996R Servo Torque at 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • 6.0V without load 0.15s / 60 degrees. Recommended voltage: 5V, current use: 3A..
  • STABLEPERFORMANCE：Stable and shock-proof iron core motor, metal gears, power supply through external adapter..
  • Tips: If you’re not completely satisfied for any reason, simply return it or contact us.Your 100% satisfaction is our goal..
Check Stock

RGBZONE 6Pcs MG90S 9G Geared Micro Servo Motor for Remote Control Helicopter Airplane Boat Smart Robot Car Micro Robot

  • MG90S micro servo motor, updated SG90 serve motor..
  • Mini micro Servo 450Dead band width: 10usec..
  • Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi, etc..
  • Gear Micro Servo Motor For robot Plane Helicopter Boat Car Horns servo Remote controlled aircraft for DIY..
  • The model is suitable for ordinary small electric aircraft models and is not recommended in large fixed wing and electric helicopter..
Check Stock

4 Pack MG996R Metal Gear Torque Digital Servo with Arm Horn, MELIFE MG996 Robot Servo Motor for FUTABA Hitec Sanwa GWS JR RC Helicopter Car Boat Robot

  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)..
  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor, Metal Gear..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees..
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

Adeept AD002 4 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

Adeept AD002 2 Pcs Compatible with MG90S 9G Micro Servo Motor, Metal Geared Micro Servo for RC Robot Car Helicopter Airplane Controls Boat Raspberry Pi Project

  • 【High Quality】100% new, good quality, AD002 Micro servo motor, Compatible with MG90 servo motor..
  • 【Full Metal Gear】 Metal gear with less noise,the metal gears help with the movement,these will rotate the proper direction..
  • Operating Speed: 0.11 seconds/60 degrees(4.8V).The servo Maximum angle is 180..
  • 【Wide Application】The great micro servo motors for helicopter/ boat / robot car / robot arm /remote controlled aircraft DIY. Fit for electronics DIY, compatible with Arduino, Raspberry Pi..
  • 【Service Guarantee】If you encounter any problems during use, please contact us, we will provide solutions to ensure your experience. We will reply within 24 hours.This AD002 servo motor is compatible with all Adeept robots..
Check Stock

Upgraded SUNLU 3D Printer S8 Pro, FDM 3D Printer with Silent Motherboard, Large Printing Size 310x310x400mm, Resume Printing, Removable Magnetic Heated Bed, Pre-Assembled Printers, Open Source

  • ①【Large Build Volume&250mm/s High Speed Printing】→ SUNLU latest FDM 3D printer S8 Pro, 310x310x400mm printing size, no need to print items in batches, save time, facilitate printing more large pieces, big size creates infinite possibilities.Fast printing speed..
  • ②【Silent Mainboard-60 DB No Noise Print】→ SUNLU’s upgraded printer comes with a new silent motherboard and a stable high-performance drive motor, it can effectively reduce noise, no excessive noise during printing..
  • ③【Quick Installation&Vertical Support Beams】→ S9 Plus is a pre-assembled printer, just fix the gantry and start printing. Disassembly is also simple, it’s convenient for users to upgrade and build their own printers(open source).Greater stability..
  • ④【Intelligent Clog Detection&Resume Printing】→ Suspend when clogging, resume after hadled. High-end detection module, real-time detection and identification of filament loading state, instantaneous response to suspend printing within 1 second after filament run-out..
  • ⑤【Equipped with with filament dryer box】→ SUNLU’s new version printer S9 Plus is compatible with many kinds of FDM printing filaments in the market, including PETG, ABS, TPU, Wood Fiber, Carbon Fiber, PLA filament, etc. Filamen....
Check Stock

Official FLSUN Super Racer SR 200mm/s High Speed Printing Delta 3D Printer with Filament Sensor and Auto Leveling FDM Delta 3D Printer 1.75 PLA DIY 3D Printers Printing Size Φ260x330mm

  • 200mm/s High-Speed Printing & 2800+ mm/s² acceleration & Three-Axis Linkage Technology.
  • Equipped 3 x 48W High-Power stepper motor and Three-axis linkage technology support a normal printing speed of Flsun Super Racer （SR） 3D printer up to 200mm/s and 2800+ mm/s² acceleration, enjoy instant high speed printing while maintaining the same molding precision quality, 200% faster than industry standard, you can save more than half of printing time..
  • Linear Rail Guide & Three-Axis Linkage Technology.
  • High-precision linear rail guide and Three-Axis Linkage Technology , providing higher printing accuracy and stability and printing speed, and lower noise..
  • Auto-Leveling System & Resume Printing Function & Removable Lattice Bed.
  • Automatic leveling system, easy to start printing, Flsun Super Racer 3D printer has the ability to resume printing even after a power outage or lapse occurs, Coated lattice glass platform, good filament viscosity, replaceable design..
  • 10.2"(L) x 10.2"(W) x 13"(H) / 260 x 260 x 330mm..
Check Stock

JG MAKER Large 3D Printer Artist-D IDEX Dual Extruder 3D Printers Direct Drive Extruder Linear Rail Large Build Volume 11.81x11.81x13.38in 98% ABS PLA PETG TPU Flexible 1.75mm (Artist-D 3D Printer)

  • WORKS OUT OF THE BOX: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. Printing volume reaches 8.27 x 8.27 x 8.07 inches..
  • UPGRADED EXTRUDER DESIGN: Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy. Works with 1.75mm 3D Printer Filament such as TPU, PLA, ABS, HIPS, WOOD, etc..
  • RESUME PRINT & SENSOR DETECTION: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches..
  • ANYCUBIC ULTRABASE: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print..
  • MORE FUNCTION: ①ANYCUBIC MEGA S is an all-in-one frame 3D printer. The rigid metal frame ....
Check Stock

ALAMSCN 5PCS SG90 9g Servo Motor + 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit DIY Kit for RC Robot Arm Helicopter Airplane Car Boat Remote Control for Arduino for Raspberry pi

  • These SG90 9G micro servo motors have a completely new redesigned PCB and control system to provide more accuracy..
  • Its internal gearing and motor are also upgraded to improve dead bandwidth and centering..
  • For SG90 9G micro servo motor is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering..
  • Apply to remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi..
  • Package includes: 5PCS SG90 9g Micro Servo + 1PC PWM Servo Motor Driver. Cost-effective kit to meet your DIY needs..
Check Stock

SEEU. AGAIN 5pcs 25T Metal RC Servo Arm Horn Aluminum M3 Threads Steering for Savox Xcore Power HL HD Servo Motors

  • Type: 5pcs Black 25T Aluminum Servo Horn Arm, Ideal Servo Accessories for Hobby Projects DIY. Suitable for power HD servos..
  • Material: Made from high quality Aluminum alloy, CNC machined for high precision, anodized finish lasting performance. Hard construction, more durable in use..
  • Special Design: Single sided arm style with 3 predrilled starter holes, 2 threaded linkage holes for adjustable pull rod position, straight arm design for more accurate and powerful turn..
  • Each steering arm come with 2 fastening screw bolts for spline locking, to secure the split-clamp onto the servo motor output..
  • Fit for most standard and high torque servo motor, MG995, MG996R, MG946R, S3003 etc. RC Model Motor..
Check Stock

Micro Machines Playtronic MAX

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock